0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

这篇具有很好参考价值的文章主要介绍了0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)。希望对大家有所帮助。如果存在错误或未考虑完全的地方,请大家不吝赐教,您也可以点击"举报违法"按钮提交疑问。

一,OLED简介:(学习本模块之前建议先把IIC,SPI通信协议提前了解)

OLED,即有机发光二极管( Organic Light Emitting Diode )。OLED由于同时具备自发光,不需背光源、对比度高、厚度薄、视角广、反应速度快、可用于挠曲性面板、使用温度范围广、构造及制程较简单等优异之特性,内部SSD1306芯片(本芯片的介绍请看后边的附件)。


LCD都需要背光,而OLED不需要,因为它是自发光的。这样同样的显示OLED效果要来得好一些。以目前的技术,OLED的尺寸还难以大型化,但是分辨率确可以做到很高。在此我们使用的是中景园电子的0.96寸OLED显示屏,该屏有以下特点:

1、0.96 寸OLED有黄蓝,白,蓝三种颜色可选;其中黄蓝是屏上1/4部分为黄光,下3/4为蓝;而且是固定区域显示固定颜色,颜色和显示区域均不能修改
2、分辨率为128*64
3、多种接口方式; OLED裸屏总共种接口包括: 6800、8080 两种并行接口方式、3线或4线的串行SPI接口方式、IIC 接口方式(只需要2根线就可以控制OLED了!),这五种接口是通过屏上的BSO~BS2来配置的。
4、接口分别为七针的SPI/IIC 兼容模块,四针的IIC模块。

简单点说:可以把屏幕当作128×64的LED组成
二,

1:实物图+原理图+接口定义:

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

SPI接口模块:

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

  1. GND电源地
  2. VCC电源正(3.3~5V)
  3. CLK 在 SPI 中为时钟管脚

  4. MOSI 在 SPI 中为数据管脚

  5. RES,用来复位(低电平复位)(电阻器)

  6. D/C 数据和命令控制管脚

  7. CS 片选管脚

 IIC接口模块:0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

  1.  SDA 数据线
  2. SCL 时钟线
  3. VCC 电源正
  4. GND 电源地

IIC通信接口是由从地址SA0,IIC总线数据信号SDA和IIC总线的时钟信号SCL。不管是数据线还是时钟线都需要连接上拉电阻。RES#是用来初始化设备的。

IIC-bus date format

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

a:bb 从机地址:(SA0)

SSD1306在发送或者接收地址前,识别到IIC总线上的从地址,设备必须回复从地址通过从地址位并且配置读写选择位(R/W位)以一个字节 的格式。

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)二进制数:(b)011110XX。

SA0”位提供一个额外的从地址位。不管是“0111_100”还是“0111_101”,都可以被选择为SSD1306的从地址。“R/W#”:用来确定IIC协议的工作模式。=1时为 读 模式。=0为 写 模式。

 b:IIC配置:

  1. 主设备开始数据通讯通过开始条件,开始条件的定义如下图。开始条件发生在SCL高电平期间,SDA产生一个下降沿的跳变。
    void IIC_Start()
    {
    
    	SCL = high;//高电平时期		
       SDA = high;
       SDA = low;//数据线一个下降信号
       SCL = low;
    }
  2. (IIC协议)写入一个字符(在此模式下RW为低电平)
    void Write_IIC_Byte(unsigned char IIC_Byte)
    {
    	unsigned char i;
    	for(i=0;i<8;i++)
    	{
    		if(IIC_Byte & 0x80)
    			SDA=high;
    		else
    			SDA=low;
    		SCL=high;
    		SCL=low;
    		IIC_Byte<<=1;
    	}
    	SDA=1;
    	SCL=1;
    	SCL=0;
    }

    一个控制字节主要包括Co位和D/C#位在六个0后,ACK:应答信号                                          应答信号定义为在SCL时钟周期的高电平期间SDA拉低//在从地址发送结束后,不管是控制字节还是数据都可以发送通过SDA线。一个控制字节主要包括Co位和D/C#位在六个0后,Co位为低电平,发送的后续信息只能是数据字节。 D/C#位决定下一个数据字节是数据还是命令字节,如果D/C#字节设置为低电平,这意味着下一个字节是命令字节,如果D/C#为是高电平,下一个数据字节是数据字节。0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机) 。应答为接收到一个数据字节或者命令后产生。

  3. 写命令
    void OLED_WrCmd(unsigned char IIC_Command)
    {
    	IIC_Start();
    	Write_IIC_Byte(0x78);            //Slave address,SA0=0  01111000
    	Write_IIC_Byte(0x00);			//write command
    	Write_IIC_Byte(IIC_Command);
    	IIC_Stop();
    }
    
  4. 写数据
    void OLED_WrCmd(unsigned char IIC_Command)
    {
    	IIC_Start();
    	Write_IIC_Byte(0x78);            //Slave address,SA0=0
    	Write_IIC_Byte(0x00);			//write command
    	Write_IIC_Byte(IIC_Command);
    	IIC_Stop();
    }
    
  5. 终止信号:停止信号发生在SCL高点平期间SDA的上升沿,作为停止信号。
    ​
    void IIC_Stop()
    {
       SCL = low;
       SDA = low;
    	SCL = high;//数据线低电平的时候给时钟线一个上升沿信号
       SDA = high;
    	
    }
    
    ​
  6.  写模式在接受到停止信号之后结束:寻址模式:三种
  • 第一种:水平寻址模式(00)
  • 第二种:垂直寻址模式(01)
  • 第三种:页寻址模式 (10)

 页地址模式下:在显示RAM写过或者读过后,列地址指针自加1,if列指针达到最后一个地址,列地址指针会回到开始地址并且页地址指针不变。用户需要设定新的地址为了下一页的RAM中的内容0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

在页地址模式下正常显示数据RAM读或写,如下的几步需要定义开始RAM接收指针位置

*设置页开始地址在目标地址通过命令B0h到B7h

*设置低起始列地址指针通过命令00h~0Fh

*设置高起始列地址指针通过10h~1Fh

 水平地址模式:

在水平地址模式,RAM读或写后,列地址指针自动加一,如果列地址到达最后一列,列地址会复位到列开始地址并且页地址指针加1。页移动的顺序和水平地址模式列地址指针如图,当列地址指针和页地址指针都到达最后一个地址时,指针会复位到列开始地址和页起始地址。

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

垂直地址模式:

在垂直地址模式,显示RAM读或者写后,页地址自加一,如果页地址指针到达最后的页地址,页地址指针会复位到页起始地址并且列地址指针自加一。垂直地址模式页地址指针的移动顺序和列地址指针如图,当列地址指针和页地址指针都到达最后一个时,指针复位到页起始地址和列起始地址。

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

在正常显示数据RAM读或写且处于水平或垂直地址模式时,要遵循一下几步来定义RAM访问指针位置:

*通过命令21h设置列起始和结束地址到目标显示位置

*通过命令22h来设置页起始和结束地址达目标显示位置

坐标位置:

	void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 
	OLED_WrCmd(0xb0+y);
	OLED_WrCmd(((x&0xf0)>>4)|0x10);
	OLED_WrCmd((x&0x0f)|0x01);
}   	  

功能描述:显示6*8一组标准的ASCII字符串 显示坐标(x,y),y为页的范围0~7:

void OLED_P6x8Str(unsigned char x, y,unsigned char ch[])
{
	unsigned char c=0,i=0,j=0;
	while (ch[j]!='\0')
	{
		c =ch[j]-32;
		if(x>126){x=0;y++;}//一页读完后,进行下一页
		OLED_Set_Pos(x,y);//位置选择
		for(i=0;i<6;i++)
		OLED_WrDat(F6x8[c][i]);// 自定义 F6x8[][] 字库会在后边提到
		x+=6;//每次6列
		j++;
	}
}

 功能描述:显示8*16一组标准的ASCII字符串 显示坐标(x,y),,y为页的范围0~7

void OLED_P8x16Str(unsigned char x, y,unsigned char ch[])
{
	unsigned char c=0,i=0,j=0;
	while (ch[j]!='\0')
	{
		c =ch[j]-32;
		if(x>120){x=0;y++;}
		OLED_Set_Pos(x,y);
		for(i=0;i<8;i++)
		OLED_WrDat(F8X16[c*16+i]);
		OLED_Set_Pos(x,y+1);
		for(i=0;i<8;i++)
		OLED_WrDat(F8X16[c*16+i+8]);
		x+=8;
		j++;
	}
}

功能描述:显示16*16一组标准的ASCII字符串 显示坐标(x,y),y为页的范围0~7

void OLED_P16x16Ch(unsigned char x, y, N)
{
	unsigned char wm=0;
	unsigned int adder=32*N;
	OLED_Set_Pos(x , y);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	}
	OLED_Set_Pos(x,y + 1);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	} 	  	
}

实物图效果:

0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)

 功能描述:显示BMP照片128×64起点坐标(x,y),x的范围0~127,y为页的范围0~7

void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[])
{
	unsigned int j=0;
	unsigned char x,y;

  if(y1%8==0) y=y1/8;      
  else y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
    for(x=x0;x<x1;x++)
	    {      
	    	OLED_WrDat(BMP[j++]);
	    }
	}
}

OLED全屏:

void OLED_Fill(unsigned char bmp_dat) 
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(bmp_dat);
	}
}

OLED复位:

void OLED_CLS(void)
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(0);
	}
}

初始化:

void OLED_Init(void)
{ 	
 delay(500);//初始化之前的延时很重要
	OLED_WrCmd(0xae);//--turn off oled panel
	OLED_WrCmd(0x00);//---set low column address
	OLED_WrCmd(0x10);//---set high column address
	OLED_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
	OLED_WrCmd(0x81);//--set contrast control register
	OLED_WrCmd(Brightness); // Set SEG Output Current Brightness
	OLED_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
	OLED_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
	OLED_WrCmd(0xa6);//--set normal display
	OLED_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
	OLED_WrCmd(0x3f);//--1/64 duty
	OLED_WrCmd(0xd3);//-set display offset	Shift Mapping RAM Counter (0x00~0x3F)
	OLED_WrCmd(0x00);//-not offset
	OLED_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
	OLED_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
	OLED_WrCmd(0xd9);//--set pre-charge period
	OLED_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
	OLED_WrCmd(0xda);//--set com pins hardware configuration
	OLED_WrCmd(0x12);
	OLED_WrCmd(0xdb);//--set vcomh
	OLED_WrCmd(0x40);//Set VCOM Deselect Level
	OLED_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
	OLED_WrCmd(0x02);//
	OLED_WrCmd(0x8d);//--set Charge Pump enable/disable
	OLED_WrCmd(0x14);//--set(0x10) disable
	OLED_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
	OLED_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) 
	OLED_WrCmd(0xaf);//--turn on oled panel
	OLED_Fill(0x00); //初始清屏
	OLED_Set_Pos(0,0);
}  

主函数:

#include <reg52.h>
#include "OLCD.h"
#include "bmp.h"
#include "intrins.h"
void main(void)
{
//	unsigned char i;

	OLED_Init(); //OLED初始化
	while(1)
	{
//	delay(200);
//		OLED_P16x16Ch(0,0,1);
//		OLED_P16x16Ch(18,0,2);
//		OLED_P16x16Ch(36,0,3);
//		OLED_P16x16Ch(74,0,4);
//		OLED_P16x16Ch(91,0,5);
//		for(i=0; i<8; i++)//通过点整显示汉字————i表示字表数组的位置
//		{
//			OLED_P16x16Ch(i*16,0,i);
//		 	OLED_P16x16Ch(i*16,2,i+8);
//		 	OLED_P16x16Ch(i*16,4,i+16);
//		 	OLED_P16x16Ch(i*16,6,i+24);
//	//		}
//	delay(4000);
//	OLED_CLS();//清屏

		OLED_P8x16Str(0,0,"Hello");//第一行 -- 8x16的显示单元显示ASCII码
		OLED_P8x16Str(0,2,"welcome to fly ");
		OLED_P8x16Str(0,4,"brother's world");
		OLED_P6x8Str(0,6,"oh,charming baby");
		OLED_P6x8Str(0,7,"666666666666666666666");
		delay(4000);
		OLED_CLS();

		Draw_BMP(0,0,128,8,BMP1);  //图片显示(图片显示慎用,生成的字表较大,会占用较多空间,FLASH空间8K一下慎用)
		delay(8000);
	OLED_CLS();//清屏
		Draw_BMP(0,0,128,8,BMP2);
		delay(8000);
			OLED_CLS();//清屏
	}
}

OLED.h//

#define low 0
#define	Brightness	0xCF 
#define X_WIDTH 	128
#define Y_WIDTH 	64
	  
void delay(unsigned int z);//OLED驱动程序用的延时函数
void IIC_Start();
void IIC_Stop();
void Write_IIC_Byte(unsigned char IIC_Byte);
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void OLED_WrCmd(unsigned char IIC_Command);
void OLED_WrDat(unsigned char IIC_Data);
void OLED_Fill(unsigned char bmp_dat) ;
void OLED_CLS(void);
void OLED_Set_Pos(unsigned char x, unsigned char y) ;
void OLED_P6x8Str(unsigned char x, y,unsigned char ch[]);
void OLED_P8x16Str(unsigned char x, y,unsigned char ch[]);
void OLED_P16x16Ch(unsigned char x, y, N);
void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[]);
void OLED_Init(void);

#endif

OLED.c//

#include "OLCD.h"
#include <reg52.h>   
#include "oledfont.h"  	
const unsigned char code F6x8[][6];
const unsigned char code F8X16[];
const unsigned char code BMP1[];
const unsigned char code BMP2[];
const unsigned char code F16x16[];
//OLED的显示
//´存放格式
//[0]0 1 2 3 ... 127	
//[1]0 1 2 3 ... 127	
//[2]0 1 2 3 ... 127	
//[3]0 1 2 3 ... 127	
//[4]0 1 2 3 ... 127	
//[5]0 1 2 3 ... 127	
//[6]0 1 2 3 ... 127	
//[7]0 1 2 3 ... 127 			

//OLED驱动程序用的延时函数
void delay(unsigned int z)
{
	unsigned int x,y;
	for(x=z;x>0;x--)
		for(y=110;y>0;y--);
}
/**********************************************
//IIC Start
**********************************************/
void IIC_Start()
{

	SCL = high;//高电平时期		
   SDA = high;
   SDA = low;//数据线一个下降信号
   SCL = low;
}

/**********************************************
//IIC Stop
**********************************************/
void IIC_Stop()
{
   SCL = low;
   SDA = low;
	SCL = high;//数据线低电平的时候给时钟线一个上升沿信号
   SDA = high;
	
}

/**********************************************
// IIC Write byte通过IIC总线写一个字节
**********************************************/

void Write_IIC_Byte(unsigned char IIC_Byte)
{
	unsigned char i;
	for(i=0;i<8;i++)
	{
		if(IIC_Byte & 0x80)
			SDA=high;
		else
			SDA=low;
		SCL=high;
		SCL=low;
		IIC_Byte<<=1;
	}
	SDA=1;
	SCL=1;
	SCL=0;
}
/**********************************************
// IIC Write Command写命令
**********************************************/
void OLED_WrCmd(unsigned char IIC_Command)
{
	IIC_Start();
	Write_IIC_Byte(0x78);            //Slave address,SA0=0
	Write_IIC_Byte(0x00);			//write command
	Write_IIC_Byte(IIC_Command);
	IIC_Stop();
}

/**********************************************
// IIC Write Data写数据
**********************************************/
void OLED_WrDat(unsigned char IIC_Data)
{
	IIC_Start();
	Write_IIC_Byte(0x78);
	Write_IIC_Byte(0x40);			//write data
	Write_IIC_Byte(IIC_Data);
	IIC_Stop();
}

//OLED全屏
void OLED_Fill(unsigned char bmp_dat) 
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(bmp_dat);
	}
}
/********************************************
//OLED复位
********************************************/

void OLED_CLS(void)
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(0);
	}
}

//坐标位置1
	void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 
	OLED_WrCmd(0xb0+y);
	OLED_WrCmd(((x&0xf0)>>4)|0x10);
	OLED_WrCmd((x&0x0f)|0x01);
}   	  

/***********¹¦功能描述:显示6*8一组标准的ASCII字符串 显示坐标(x,y),y为页的范围0~7*****************/
void OLED_P6x8Str(unsigned char x, y,unsigned char ch[])
{
	unsigned char c=0,i=0,j=0;
	while (ch[j]!='\0')
	{
		c =ch[j]-32;
		if(x>126){x=0;y++;}
		OLED_Set_Pos(x,y);
		for(i=0;i<6;i++)
		OLED_WrDat(F6x8[c][i]);
		x+=6;
		j++;
	}
}

/***********¹¦功能描述:显示8*16一组标准的ASCII字符串 显示坐标(x,y),,y为页的范围0~7*****************/
void OLED_P8x16Str(unsigned char x, y,unsigned char ch[])
{
	unsigned char c=0,i=0,j=0;
	while (ch[j]!='\0')
	{
		c =ch[j]-32;
		if(x>120){x=0;y++;}
		OLED_Set_Pos(x,y);
		for(i=0;i<8;i++)
		OLED_WrDat(F8X16[c*16+i]);
		OLED_Set_Pos(x,y+1);
		for(i=0;i<8;i++)
		OLED_WrDat(F8X16[c*16+i+8]);
		x+=8;
		j++;
	}
}

/***********¹¦功能描述:显示16*16一组标准的ASCII字符串 显示坐标(x,y),y为页的范围0~7*****************/
void OLED_P16x16Ch(unsigned char x, y, N)
{
	unsigned char wm=0;
	unsigned int adder=32*N;
	OLED_Set_Pos(x , y);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	}
	OLED_Set_Pos(x,y + 1);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	} 	  	
}
/***********¹¦功能描述:显示BMP照片128×64起点坐标(x,y),x的范围0~127,y为页的范围0~7*****************/
void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[])
{
	unsigned int j=0;
	unsigned char x,y;

  if(y1%8==0) y=y1/8;      
  else y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
    for(x=x0;x<x1;x++)
	    {      
	    	OLED_WrDat(BMP[j++]);
	    }
	}
}


//初始化SSD1306芯片					    
void OLED_Init(void)
{ 	
 delay(500);//初始化之前的延时很重要
	OLED_WrCmd(0xae);//--turn off oled panel
	OLED_WrCmd(0x00);//---set low column address
	OLED_WrCmd(0x10);//---set high column address
	OLED_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
	OLED_WrCmd(0x81);//--set contrast control register
	OLED_WrCmd(Brightness); // Set SEG Output Current Brightness
	OLED_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
	OLED_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
	OLED_WrCmd(0xa6);//--set normal display
	OLED_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
	OLED_WrCmd(0x3f);//--1/64 duty
	OLED_WrCmd(0xd3);//-set display offset	Shift Mapping RAM Counter (0x00~0x3F)
	OLED_WrCmd(0x00);//-not offset
	OLED_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
	OLED_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
	OLED_WrCmd(0xd9);//--set pre-charge period
	OLED_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
	OLED_WrCmd(0xda);//--set com pins hardware configuration
	OLED_WrCmd(0x12);
	OLED_WrCmd(0xdb);//--set vcomh
	OLED_WrCmd(0x40);//Set VCOM Deselect Level
	OLED_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
	OLED_WrCmd(0x02);//
	OLED_WrCmd(0x8d);//--set Charge Pump enable/disable
	OLED_WrCmd(0x14);//--set(0x10) disable
	OLED_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
	OLED_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) 
	OLED_WrCmd(0xaf);//--turn on oled panel
	OLED_Fill(0x00); //初始清屏
	OLED_Set_Pos(0,0);
}  

bmp.h//图片

#ifndef __BMP_H
#define __BMP_H
unsigned char code BMP1[] =
{
0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xF8,0x0C,0x0C,0xF8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
0xC0,0x40,0x60,0x7E,0x02,0x03,0x7F,0x40,0x40,0xC0,0x80,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x30,0x10,0x10,0x10,0x00,0x40,0x80,0x80,0x00,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xFC,0xFE,0x03,0x01,0x01,0x08,0xC8,0xF8,0x01,0x01,0x03,0x07,0x06,0x0C,
0x18,0x10,0x30,0xE0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFF,
0xDA,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x03,0x06,0x1C,
0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xCE,0x78,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x01,0x01,0x00,
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x81,0x81,0x81,0x81,0x81,0x83,0x82,
0x06,0x06,0x04,0x0C,0x06,0x03,0x01,0x10,0x19,0x81,0xC1,0x43,0x7E,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x01,0x03,0x06,0x04,0x0E,0x0F,0x07,0x0F,0x0C,0x08,0x18,0xD0,0x00,0x00,
0x00,0x00,0x00,0x00,0x07,0x1C,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x01,0x03,0x03,0x02,0x8E,0xFE,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x03,0x18,0xF8,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xF0,0x3F,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x7C,0xE0,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0xFC,
0xC6,0x83,0x83,0x33,0x33,0x03,0x03,0x06,0x1C,0x08,0x0C,0x04,0x04,0x06,0x86,0x82,
0x83,0x03,0x03,0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x83,0x8F,0xF8,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0xF8,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x18,0xFF,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x70,0x3F,0x08,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x01,0x00,0x80,
0xF0,0x3F,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0x03,0x01,0x03,
0x03,0x03,0x03,0x40,0x40,0x40,0x41,0x43,0x03,0x03,0x03,0x73,0xFF,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFE,0xE0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0x0F,0x3E,0xF0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x3C,0xFC,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x1F,0x1F,0x18,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x7F,
0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x00,0x00,0x00,0x7F,0x01,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xF0,0xF8,0x7F,0x1F,0x07,0x01,0xFF,0x02,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x3F,0xFC,0xF8,0xB8,0x78,0xE0,0x80,0x00,0x00,
0x00,0x00,0x00,0x01,0x07,0x3F,0x78,0xE0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,
0x3C,0x7C,0xF0,0x00,0x00,0x00,0x80,0xC0,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x9C,0xF0,0xC0,
0x00,0x03,0x03,0x06,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x03,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0B,0x0F,0x01,0x00,0xC0,0xF8,0x3F,0x07,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x3F,0xFF,0xF8,0x01,0x03,0x0C,0x38,
0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x3C,0x30,0x30,0x30,0x30,
0x05,0x01,0x01,0x13,0x30,0x30,0xB0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x01,0x0F,0x78,0x30,0x1E,0x00,0xA0,0xC7,0x0C,0x18,0x10,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x18,0x07,0x03,0x01,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x80,0xE0,0x78,0x1E,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x01,0x03,0x07,0x06,0x0E,0x1C,0x18,0x30,0x60,0x60,0xC0,0xC0,0x80,0x80,0xC0,
0xC0,0xE0,0xC0,0x40,0x40,0x60,0x60,0x3E,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0xFC,0xF0,0xF0,0x60,0x00,0x00,0x00,0x00,/*"C:\Users\bqdmhsns\Desktop\1.bmp",0*/

};

unsigned char code BMP2[] =
{
	
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,
0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x88,0x88,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0xE0,0xE0,0xE0,0xE0,0xE0,0x70,0x70,0x70,
0x18,0x18,0x18,0x08,0x08,0x0E,0x0E,0x0E,0x06,0x06,0x06,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x07,0x07,0x07,0x06,0x06,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x08,0x08,0x18,0x18,0x18,
0x70,0x70,0x70,0x70,0x70,0xE0,0xE0,0xE0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0xE0,
0xF8,0xF8,0xF8,0x1F,0x1F,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x80,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0x60,0x60,0x60,
0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x60,0x60,0xE0,0xE0,0xE0,
0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x8F,0x8F,0xFE,0xFE,0xFE,
0xF0,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,
0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x0E,0x0E,
0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x6F,0x6F,0x6F,
0x60,0x60,0x60,0x60,0x60,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x70,0x10,0x10,0x10,
0x19,0x19,0x19,0x0F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x0F,0x0F,0x0F,0x1F,0x1F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x70,0x70,0x70,0x70,0x70,
0x70,0x70,0x70,0x10,0x10,0x18,0x18,0x18,0x1F,0x1F,0x1F,0x07,0x07,0x00,0x00,0x00,
0x1F,0x1F,0x1F,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0x0F,
0xE0,0xE0,0xE0,0xE0,0xE0,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x70,0xE0,0xE0,0xE0,
0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0x00,0x00,0x60,0x60,0x60,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0xE0,0xE0,0xE0,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x07,0x07,0x1E,0x1E,0x1E,0x78,0x78,0x78,0xF0,0xF0,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x07,0x07,0x07,0x06,0x06,0x06,0x06,0x06,
0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x0E,0x06,0x06,0x07,0x07,0x07,
0x07,0x07,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,
0x80,0x80,0x80,0xE0,0xE0,0x70,0x70,0x70,0x10,0x10,0x10,0x18,0x18,0x0F,0x0F,0x0F,
0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE1,0xE1,0xE1,
0xFF,0xFF,0xFF,0x0F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0x07,0x07,0x01,0x01,0x01,
0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0xFF,0xFF,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"C:\Users\bqdmhsns\Desktop\2.bmp",0*/
};

#endif

oledfont.h//字符取模

#ifndef __OIEDFONT_H
#define __OIEDFONT_H
/************************************6*8的点阵************************************/
extern const unsigned char code F6x8[][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
extern const unsigned char code F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

/***************************16*16的点阵字体取模方式:共阴——行列式--逆向输出*********/
//extern const unsigned char code F16x16[] = 	  	 
//{  	  

//};





<汉字的取模方式以及图片的取模请看下一篇帖子>小编继续努力学习。文章来源地址https://www.toymoban.com/news/detail-400061.html

到了这里,关于0.96寸 4针 OLED显示屏模块学习笔记(基于89C52单片机)的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处: 如若内容造成侵权/违法违规/事实不符,请点击违法举报进行投诉反馈,一经查实,立即删除!

领支付宝红包 赞助服务器费用

相关文章

  • 【mcuclub】0.96寸oled显示屏

     proteus8.9版本中没有OLED,通常用LCD12864模拟代替,而proteus8.13中有OLED,大家有兴趣可以下载测试 OLED(Organic Light-Emitting Diode),又称为有机电激光显示、有机发光半导体。OLED显示技术具有自发光的特性,采用非常薄的有机材料涂层和玻璃基板,当有电流通过时,这些有机材料

    2024年03月28日
    浏览(48)
  • ESP32 入门笔记04: 0.96寸OLED 显示屏 + u8g2库丝滑显示UI (ESP32 for Arduino IDE)

    先导知识 ESP32 入门笔记01:开发板信息、开发环境搭建以及学资料准备 ESP32 入门笔记02: GPIO参考指南 在本例中,我们使用 I2C 通信协议。ESP32 中最适合 I2C 通信的引脚是通用输入输出接口 22(SCL) 和通用输入输出接口 21(SDA) 。 安装 SSD1306 OLED 库 – ESP32 (也可以用u8g2库,在Ardu

    2024年01月19日
    浏览(56)
  • 0.96寸OLED显示屏文字取模和图片取模教程

    目录 1、文字取模 2、图片取模         第一种、PCtoLCD2002         第二种、Img2Lcd(个人推荐)  总结 资源见本章最底部         打开取模软件,如下图所示:          设置相关选项          可设置汉字宽高,如下图所示:          开始生成汉字C数组,如下图

    2024年02月06日
    浏览(46)
  • 基于HAL库的stm32的OLED显示屏显示(模拟I2C,四脚,0.96寸)

    参考视频:江科大oled程序移植stm32hal库,freertos学习,cpu使用率_哔哩哔哩_bilibili ​ STM32入门教程-2023持续更新中_哔哩哔哩_bilibili 高速和低速晶振均选择为陶瓷晶振即可。 不需更改初始化配置,因为模拟I2C初始化时会设置这两个引脚的电平 step1、step2完成后生成工程即可。 代

    2024年02月06日
    浏览(53)
  • STM32F103模拟IIC控制4针0.96寸OLED显示屏

    OLED,即有机发光二极管(Organic Light-Emitting Diode),又称为有机电激光显示(Organic Electroluminesence Display, OELD)。OLED由于同时具备自发光,不需背光源、对比度高、厚度薄、视角广、反应速度快、可用于挠曲性面板、使用温度范围广、构造及制程较简单等优异之特性,被认为

    2023年04月24日
    浏览(54)
  • STM32F103硬件IIC控制4针0.96寸OLED显示屏

    OLED使用的0.96寸四针屏幕,以下直接看实际操作。 使用PCtoLCD2002软件提取OLED字模。 注意红色方框的选项内容,不要选错了,选错会导致烧录程序后无法显示。 此为硬件IIC,如果使用过我的模拟IIC控制程序可直接看 void OLED_Write_Command(unsigned char IIC_Command); void OLED_Write_Data(unsig

    2024年02月02日
    浏览(51)
  • STM32F103硬件SPI控制6针/7针0.96寸OLED显示屏

    OLED主要参数 1、高分辨率:128 64(和12864LCD相同分辨率,但该OLED屏的单位面积像素点多)。 2、广可视角度:大于160°。 3、低功耗:正常显示时0.04W。 4、宽供电范围:直流3.3V-5V。 5、工业级:工作温度范围-30°℃~70°℃。 6、体积小:28.8mm 28.5mm。 7、通信方式:lIC、SPI。 8、亮

    2024年02月17日
    浏览(81)
  • STM32F103模拟SPI控制6针/7针0.96寸OLED显示屏

    OLED主要参数 1、高分辨率:128 64(和12864LCD相同分辨率,但该OLED屏的单位面积像素点多)。 2、广可视角度:大于160°。 3、低功耗:正常显示时0.04W。 4、宽供电范围:直流3.3V-5V。 5、工业级:工作温度范围-30°℃~70°℃。 6、体积小:28.8mm 28.5mm。 7、通信方式:lIC、SPI。 8、亮

    2024年02月04日
    浏览(160)
  • 5、江科大stm32视频学习笔记——OLED显示屏

    目录 1、OLED简介  2、OLED硬件电路 3、OLED驱动函函数简介和应用 4、用keil进行调试 4引脚OLED SCL和SDA是I2C通信引脚,需要接在I2C通信的引脚上 实验中用的模块是GPIO口模拟的I2C通信,故SCL和SDA两个端口可以接在任意的GPIO口上 7引脚OLED 右边5个引脚是SPI通信协议的引脚 如果是GPI

    2024年02月14日
    浏览(42)
  • OLED 液晶屏显示模块(0.96寸)

           OLED,即有机发光二极管(Organic Light-Emitting Diode),又称为有机电激光显示(Organic Electroluminesence Display, OELD)。因为具备轻薄、省电等特性,因此从 2003 年开始,这种显示设备在 MP3 播放器上得到了广泛应用,而对于同属数码类产品的 DC与手机,此前只是在一些展会上

    2024年02月05日
    浏览(55)

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

博客赞助

微信扫一扫打赏

请作者喝杯咖啡吧~博客赞助

支付宝扫一扫领取红包,优惠每天领

二维码1

领取红包

二维码2

领红包