直流无刷电机驱动的PWM频率-Toy模板网

这篇具有很好参考价值的文章主要介绍了直流无刷电机驱动的PWM频率。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

针对ESCON伺服驱动器：
https://support.maxongroup.com/hc/en-us/articles/360020442720-ESCON-PWM-input-frequency-PWM-output-frequency-
Impact of the PWM input frequency?
Please be aware that the PWM input frequency in use also determines how fast updated set values can be identified and processed because one period has to measured before the PWM duty cycle can be determined. High PWM input frequencies mean shorter periods and a more dynamic reaction on any set value change.

In case of the minimum PWM input frequency of 10 Hz each measurement lasts 100 ms before an updated set value can be determined and processed by the control loop.
In case of the maximum PWM input frequency of 5 kHz each measurement last just 0.2 ms before an updated set value can be determined and processed by the control loop.
A good compromise in practice offering fast reaction and precise duty cycle measurement is to use 1 kHz which needs 1 ms for signal processing.

以下来源：Understanding the effect of PWM when controlling a brushless dc motorhttps://www.controleng.com/articles/understanding-the-effect-of-pwm-when-controlling-a-brushless-dc-motor/
Brushless dc motors have an electrical time constant τ of a few hundred microseconds. The current will therefore have the time to react during each PWM cycle (see Figure 11). However, the mechanical time constant is in the range of a few milliseconds, so there is a factor of 10 between the mechanical and the electrical time constant. Therefore, the rotor of the motor itself will not have enough time to react when the voltage is switched at typical PWM frequencies. Low PWM frequencies of a few thousand Hertz may generate rotor vibrations and audible noise. It is advisable to go above the audible spectrum, meaning at least above 20 kHz.

以下来源：Smooth PWM current control of a Maxon DC Motor
https://www.electro-tech-online.com/threads/smooth-pwm-current-control-of-a-maxon-dc-motor.110965/
The electrical time constant of your motor is about 375 microseconds. With that time constant I would use PWM frequencies above 30 kHz. Maybe even 40…60 kHz if you can get enough resolution from your microcontroller.文章来源地址https://www.toymoban.com/news/detail-401602.html

到了这里，关于直流无刷电机驱动的PWM频率的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！