S7506X-A
<H3C>system-view
[H3C]irf member 1
[H3C]irf priority 32
[H3C]irf-port 2
[H3C-irf-port2]port group interface ten-gigabitethernet 1/0/47
[H3C-irf-port2]port group interface ten-gigabitethernet 1/0/48
[H3C-irf-port2] quit
ps:要保证47和48两个接口是启用状态。
[H3C]save
[H3C]chassis convert mode irf
S7506X-B
<H3C>system-view
[H3C]irf member 2
[H3C]irf-port 1
[H3C-irf-port2] port group interface ten-gigabitethernet 1/0/47
[H3C-irf-port2] port group interface ten-gigabitethernet 1/0/48
[H3C-irf-port1] quit
ps:要保证47和48两个接口是启用状态。
[H3C]save
[H3C]chassis convert mode irf
配置BFD MAD检测
<H3C>system-view
[H3C] irf link-delay 0
# 创建VLAN 99,并将S7506X-A(成员编号为1)上的端口1/5/0/1和S7506X-B(成员编号为2)上的端口2/5/0/1加入VLAN中。
[H3C] vlan 99
[H3C-vlan99] port gigabitethernet 1/5/0/1 gigabitethernet 2/5/0/1
[H3C-vlan99] quit
# VLAN接口99界面,并配置MAD IP地址。
[H3C] interface vlan-interface 99
[H3C-Vlan-interface99] mad bfd enable
[H3C-Vlan-interface99] mad ip address 192.168.99.1 24 member 1
[H3C-Vlan-interface99] mad ip address 192.168.99.2 24 member 2
[H3C-Vlan-interface99] quit
# 因为BFD MAD和生成树功能互斥,所以在GigabitEthernet1/5/0/1和GigabitEthernet2/5/0/1上关闭生成树协议。
[H3C] interface gigabitethernet 1/5/0/1
[H3C-gigabitethernet-1/5/0/1] undo stp enable
[H3C-gigabitethernet-1/5/0/1] quit
[H3C] interface gigabitethernet 2/5/0/1
[H3C-gigabitethernet-2/5/0/1] undo stp enable
dis irf configuration查看irf配置信息
dis irf link 查看irf信息
dis bfd session 查看bfd情况文章来源:https://www.toymoban.com/news/detail-447634.html
dis mad verbose查看mad状态文章来源地址https://www.toymoban.com/news/detail-447634.html
到了这里,关于H3C-S7506X-IRF配置教程(BFD MAD检测)的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!