一、背景介绍
1、最近项目中需要给客户对接海康机器人工业相机 MV-CU060-10GM；
2、客户要求通过部署的管理平台，可以在页面上实现如下功能：
1）相机视频流开始预览；
2）相机视频流停止预览；
3）相机拍照功能。
需求背景：客户需要对生产的产品进行定期抽样质检，其中涉及到外观检测，比如，样品的表面清洁度、外观等指标。所以，需要先通过管理平台点击相机的“预览”按钮，进行预览相机拍摄的实时效果，当客户认为清晰度和角度满足条件时，才会点击“拍照”按钮进行拍摄，从而保证质检的照片是有意义和有实用价值的。
二、调研历程
由于项目团队同事之前没有做过工业相机视频和拍照的相关开发，于是乎，就开启了“漫长”而“煎熬”的调研之路（断断续续持续了1个多月）。
最终于2022年12月6日，通过 Python “完美”实现了上述的三个功能。
特地写下此篇博客，供需要的网友参考，避免少走很多弯路。
1、海康工业相机官网
https://www.hikrobotics.com/cn/machinevision/productdetail?id=8518&pageNumber=13&pageSize=20
2、官网示例
可以在海康机器人官网提供的客户端工具 MVS，“帮助”–> “Development”，点击“Development”会跳转到安装目录，从“Samples”中获取官方提供的一些简单示例。
如果已经安装了 MVS，直接进入 C:\Program Files (x86)\MVS\Development\Samples 目录即可看到，目前支持 C#、C++、Java、OpenCV、Python、VB等语言。
本人主要使用Java和Python，所以，本篇博文主要从Java和Python两种语言调研了实现方案。
1）Java示例
SaveImage 有获取图片的示例，但是，没有视频流获取并显示的示例。（参考示例相对较少）
2）Python示例
GrabImage 目录下有获取图片的示例，Recording 目录下有获取视频流的示例，但是没有将视频流返回前端的示例。（参考示例相对较多）
3、网上博客参考
1）RTSP（Runtime Stream Protocol）协议方向
（很遗憾，此路不通！！！）
因为我们用的 海康机器人工业相机 MV-CU060-10GM 这款相机，不支持 RTSP 协议。
如下博客适用于 海康威视摄像头，并不适用于 海康工业相机，如果是使用海康威视摄像头的小伙伴可以参考下。
参考博客：海康威视摄像头对接SDK实时预览功能和抓拍功能，懒癌福利，可直接CV
2）Java实现方向
（不能完全满足客户需求，此路不全通！！！）
使用Java目前参考官网的示例，实现了图片抓取，并上传的功能，但是没有实现视频流的实时获取和显示的功能。
如果需求只是获取图片，不要求视频流实时显示，可以通过Java就可以实现。
3）Python实现方向
（目前，网上没有直接能完全满足上述三个需求的，本人通过借鉴、整合，结合Flask框架实现的。）
参考博客如下：
python语言下使用opencv接口cv2.VideoCapture()接口调用海康机器人工业相机 （此篇博文可以重点看！！！）
通过python调用海康威视工业摄像头并进行图像存储，同时使用opencv实时图像显示（数据流问题已解决）
python调用海康工业相机并用opencv显示（整体实现）（此篇博文可以重点看！！！）
pyQT5 学习使用 笔记 六 pyQt5+opencv 显示海康GIGE相机动态视频流 (该方式虽然实现了视频的实时显示，但是，无法被给前端直接调用)
web实时显示摄像头图像（python） （此篇博文可以重点看！！！）
4）Flask 的相关教程和博客
- https://www.w3cschool.cn/flask/
- https://dormousehole.readthedocs.io/en/latest/
- https://blog.csdn.net/weixin_44239541/article/details/89390139
- https://zhuanlan.zhihu.com/p/104273184
- https://blog.csdn.net/tulan_xiaoxin/article/details/79132214
三、Python 代码实现
1、Python 环境
1）Python 版本
个人使用的是 Python 3.8.5 版本（建议使用该版本或者更高版本）
Python 官网地址：https://www.python.org/
安装和配置可以参考：https://www.runoob.com/python3/python3-install.html
2）Python 虚拟环境
个人建议给该工程单独创建一个Python虚拟环境（如：hikrobotEnv），后续现场如果出现无法连接外网的情况下，可以直接Copy虚拟环境部署，比较方便。
当然，如果不是特殊情况，多个项目工程可以共用一个虚拟环境，可以使用 virtualenv、anaconda、PyCharm 等创建虚拟环境。
以 virtualenv 为例，创建 hikrobotEnv 虚拟环境的命令如下：
virtualenv hikrobotEnv --python=python3.8.5
如果没有安装 virtualenv，可以通过如下命令安装：
pip install virtualenv
关于 virtualenv 的相关介绍和使用，可以参考博客：Python虚拟环境Virtualenv详解
2、测试代码
1）抓取图片测试代码
前提条件：将 *C:\Program Files (x86)\MVS\Development\Samples\Python* 目录下的 MvImport 目录，copy到自己的工程目录下，创建测试文件 TestGrabImage.py
代码如下：
# -- coding: utf-8 --
import cv2
import sys
import copy
import msvcrt
import numpy as np
from ctypes import *
sys.path.append("./MvImport")
from MvCameraControl_class import *
if __name__ == "__main__":
deviceList = MV_CC_DEVICE_INFO_LIST()
tlayerType = MV_GIGE_DEVICE | MV_USB_DEVICE
# ch:枚举设备 | en:Enum device
ret = MvCamera.MV_CC_EnumDevices(tlayerType, deviceList)
if ret != 0:
print ("enum devices fail! ret[0x%x]" % ret)
sys.exit()
if deviceList.nDeviceNum == 0:
print ("find no device!")
sys.exit()
print ("find %d devices!" % deviceList.nDeviceNum)
for i in range(0, deviceList.nDeviceNum):
mvcc_dev_info = cast(deviceList.pDeviceInfo[i], POINTER(MV_CC_DEVICE_INFO)).contents
if mvcc_dev_info.nTLayerType == MV_GIGE_DEVICE:
print ("\ngige device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stGigEInfo.chModelName:
strModeName = strModeName + chr(per)
print ("device model name: %s" % strModeName)
nip1 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0xff000000) >> 24)
nip2 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x00ff0000) >> 16)
nip3 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x0000ff00) >> 8)
nip4 = (mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x000000ff)
print ("current ip: %d.%d.%d.%d\n" % (nip1, nip2, nip3, nip4))
elif mvcc_dev_info.nTLayerType == MV_USB_DEVICE:
print ("\nu3v device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chModelName:
if per == 0:
break
strModeName = strModeName + chr(per)
print ("device model name: %s" % strModeName)
strSerialNumber = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chSerialNumber:
if per == 0:
break
strSerialNumber = strSerialNumber + chr(per)
print ("user serial number: %s" % strSerialNumber)
nConnectionNum = 0
if int(nConnectionNum) >= deviceList.nDeviceNum:
print ("intput error!")
sys.exit()
# ch:创建相机实例 | en:Creat Camera Object
cam = MvCamera()
# ch:选择设备并创建句柄 | en:Select device and create handle
stDeviceList = cast(deviceList.pDeviceInfo[int(nConnectionNum)], POINTER(MV_CC_DEVICE_INFO)).contents
ret = cam.MV_CC_CreateHandle(stDeviceList)
if ret != 0:
print ("create handle fail! ret[0x%x]" % ret)
sys.exit()
# ch:打开设备 | en:Open device
ret = cam.MV_CC_OpenDevice(MV_ACCESS_Exclusive, 0)
if ret != 0:
print ("open device fail! ret[0x%x]" % ret)
sys.exit()
# ch:探测网络最佳包大小(只对GigE相机有效) | en:Detection network optimal package size(It only works for the GigE camera)
if stDeviceList.nTLayerType == MV_GIGE_DEVICE:
nPacketSize = cam.MV_CC_GetOptimalPacketSize()
if int(nPacketSize) > 0:
ret = cam.MV_CC_SetIntValue("GevSCPSPacketSize", nPacketSize)
if ret != 0:
print ("Warning: Set Packet Size fail! ret[0x%x]" % ret)
else:
print ("Warning: Get Packet Size fail! ret[0x%x]" % nPacketSize)
# ch:设置触发模式为off | en:Set trigger mode as off
ret = cam.MV_CC_SetEnumValue("TriggerMode", MV_TRIGGER_MODE_OFF)
if ret != 0:
print ("set trigger mode fail! ret[0x%x]" % ret)
sys.exit()
# ch:获取数据包大小 | en:Get payload size
stParam = MVCC_INTVALUE()
memset(byref(stParam), 0, sizeof(MVCC_INTVALUE))
ret = cam.MV_CC_GetIntValue("PayloadSize", stParam)
if ret != 0:
print ("get payload size fail! ret[0x%x]" % ret)
sys.exit()
nPayloadSize = stParam.nCurValue
# ch:开始取流 | en:Start grab image
ret = cam.MV_CC_StartGrabbing()
if ret != 0:
print ("start grabbing fail! ret[0x%x]" % ret)
sys.exit()
stDeviceList = MV_FRAME_OUT_INFO_EX()
memset(byref(stDeviceList), 0, sizeof(stDeviceList))
data_buf = (c_ubyte * nPayloadSize)()
ret = cam.MV_CC_GetOneFrameTimeout(byref(data_buf), nPayloadSize, stDeviceList, 1000)
if ret == 0:
print ("get one frame: Width[%d], Height[%d], nFrameNum[%d]" % (stDeviceList.nWidth, stDeviceList.nHeight, stDeviceList.nFrameNum))
nRGBSize = stDeviceList.nWidth * stDeviceList.nHeight * 3
stConvertParam=MV_SAVE_IMAGE_PARAM_EX()
stConvertParam.nWidth = stDeviceList.nWidth
stConvertParam.nHeight = stDeviceList.nHeight
stConvertParam.pData = data_buf
stConvertParam.nDataLen = stDeviceList.nFrameLen
stConvertParam.enPixelType = stDeviceList.enPixelType
stConvertParam.nImageLen = stConvertParam.nDataLen
stConvertParam.nJpgQuality = 70
stConvertParam.enImageType = MV_Image_Jpeg
stConvertParam.pImageBuffer = (c_ubyte * nRGBSize)()
stConvertParam.nBufferSize = nRGBSize
# ret = cam.MV_CC_ConvertPixelType(stConvertParam)
print(stConvertParam.nImageLen)
ret = cam.MV_CC_SaveImageEx2(stConvertParam)
if ret != 0:
print ("convert pixel fail ! ret[0x%x]" % ret)
del data_buf
sys.exit()
file_path = "AfterConvert_RGB2.jpg"
file_open = open(file_path.encode('ascii'), 'wb+')
img_buff = (c_ubyte * stConvertParam.nImageLen)()
cdll.msvcrt.memcpy(byref(img_buff), stConvertParam.pImageBuffer, stConvertParam.nImageLen)
file_open.write(img_buff)
print ("Save Image succeed!")
# ch:停止取流 | en:Stop grab image
ret = cam.MV_CC_StopGrabbing()
if ret != 0:
print ("stop grabbing fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:关闭设备 | Close device
ret = cam.MV_CC_CloseDevice()
if ret != 0:
print ("close deivce fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:销毁句柄 | Destroy handle
ret = cam.MV_CC_DestroyHandle()
if ret != 0:
print ("destroy handle fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
del data_buf
在python 虚拟环境中，执行 python TestGrabImage.py 运行后，会在当前目录下生成一个名为 AfterConvert_RGB2.jpg 的图片文件。
如果运行过程中提示模块不存在，可以通过 pip install 命令安装相应的模块，建议使用清华源，如 安装 opencv-python，命令如下：
pip install opencv-python==4.1.2.30 -i https://pypi.tuna.tsinghua.edu.cn/simple
2）Python+Qt 实现视频流实时显示测试代码
前提条件：将 *C:\Program Files (x86)\MVS\Development\Samples\Python* 目录下的 MvImport 目录，copy到自己的工程目录下，创建测试文件 TestVideoStream.py
代码如下：
# -- coding: utf-8 --
import cv2
from PyQt5 import QtCore, QtGui, QtWidgets
from PyQt5.QtCore import pyqtSignal
from PyQt5.QtGui import *
import numpy as np
#from CameraControl_header import MV_CC_DEVICE_INFO_LIST
#from mainWindow import Ui_MainWindow # 导入创建的GUI类
import sys
import threading
import msvcrt
from ctypes import *
sys.path.append("./MvImport")
from MvCameraControl_class import *
from Ui_MainWindow import *
from CameraParams_header import *
class mywindow(QtWidgets.QMainWindow, Ui_MainWindow):
sendAddDeviceName = pyqtSignal() #定义一个添加设备列表的信号。
deviceList = MV_CC_DEVICE_INFO_LIST()
g_bExit = False
# ch:创建相机实例 | en:Creat Camera Object
cam = MvCamera()
def connect_and_emit_sendAddDeviceName(self):
# Connect the sendAddDeviceName signal to a slot.
self.sendAddDeviceName.connect(self.SelectDevice)
# Emit the signal.
self.sendAddDeviceName.emit()
def __init__(self):
super(mywindow, self).__init__()
self.setupUi(self)
self.connect_and_emit_sendAddDeviceName()
self.butopenCam.clicked.connect(lambda:self.openCam(self.camSelect.currentData()))
self.butcloseCam.clicked.connect(self.closeCam)
# setting main window geometry
desktop_geometry = QtWidgets.QApplication.desktop() # 获取屏幕大小
main_window_width = desktop_geometry.width() # 屏幕的宽
main_window_height = desktop_geometry.height() # 屏幕的高
rect = self.geometry() # 获取窗口界面大小
window_width = rect.width() # 窗口界面的宽
window_height = rect.height() # 窗口界面的高
x = (main_window_width - window_width) // 2 # 计算窗口左上角点横坐标
y = (main_window_height - window_height) // 2 # 计算窗口左上角点纵坐标
self.setGeometry(x, y, window_width, window_height) # 设置窗口界面在屏幕上的位置
# 无边框以及背景透明一般不会在主窗口中用到，一般使用在子窗口中，例如在子窗口中显示gif提示载入信息等等
# self.setWindowFlags(Qt.FramelessWindowHint)
# self.setAttribute(Qt.WA_TranslucentBackground)
#打开摄像头。
def openCam(self,camid):
self.g_bExit = False
# ch:选择设备并创建句柄 | en:Select device and create handle
stDeviceList = cast(self.deviceList.pDeviceInfo[int(camid)], POINTER(MV_CC_DEVICE_INFO)).contents
ret = self.cam.MV_CC_CreateHandle(stDeviceList)
if ret != 0:
print("create handle fail! ret[0x%x]" % ret)
sys.exit()
# ch:打开设备 | en:Open device
ret = self.cam.MV_CC_OpenDevice(MV_ACCESS_Exclusive, 0)
if ret != 0:
print("open device fail! ret[0x%x]" % ret)
sys.exit()
# ch:探测网络最佳包大小(只对GigE相机有效) | en:Detection network optimal package size(It only works for the GigE camera)
if stDeviceList.nTLayerType == MV_GIGE_DEVICE:
nPacketSize = self.cam.MV_CC_GetOptimalPacketSize()
if int(nPacketSize) > 0:
ret = self.cam.MV_CC_SetIntValue("GevSCPSPacketSize", nPacketSize)
if ret != 0:
print("Warning: Set Packet Size fail! ret[0x%x]" % ret)
else:
print("Warning: Get Packet Size fail! ret[0x%x]" % nPacketSize)
# ch:设置触发模式为off | en:Set trigger mode as off
ret = self.cam.MV_CC_SetEnumValue("TriggerMode", MV_TRIGGER_MODE_OFF)
if ret != 0:
print("set trigger mode fail! ret[0x%x]" % ret)
sys.exit()
# ch:获取数据包大小 | en:Get payload size
stParam = MVCC_INTVALUE()
memset(byref(stParam), 0, sizeof(MVCC_INTVALUE))
ret = self.cam.MV_CC_GetIntValue("PayloadSize", stParam)
if ret != 0:
print("get payload size fail! ret[0x%x]" % ret)
sys.exit()
nPayloadSize = stParam.nCurValue
# ch:开始取流 | en:Start grab image
ret = self.cam.MV_CC_StartGrabbing()
if ret != 0:
print("start grabbing fail! ret[0x%x]" % ret)
sys.exit()
data_buf = (c_ubyte * nPayloadSize)()
try:
hThreadHandle = threading.Thread(target=self.work_thread, args=(self.cam, data_buf, nPayloadSize))
hThreadHandle.start()
except:
print("error: unable to start thread")
#关闭相机
def closeCam(self):
self.g_bExit=True
# ch:停止取流 | en:Stop grab image
ret = self.cam.MV_CC_StopGrabbing()
if ret != 0:
print("stop grabbing fail! ret[0x%x]" % ret)
sys.exit()
# ch:关闭设备 | Close device
ret = self.cam.MV_CC_CloseDevice()
if ret != 0:
print("close deivce fail! ret[0x%x]" % ret)
# ch:销毁句柄 | Destroy handle
ret = self.cam.MV_CC_DestroyHandle()
if ret != 0:
print("destroy handle fail! ret[0x%x]" % ret)
def work_thread(self,cam=0, pData=0, nDataSize=0):
stFrameInfo = MV_FRAME_OUT_INFO_EX()
memset(byref(stFrameInfo), 0, sizeof(stFrameInfo))
while True:
QIm = np.asarray(pData) # 将c_ubyte_Array转化成ndarray得到（3686400，）
QIm = QIm.reshape((2048, 3072, 1)) # 根据自己分辨率进行转化
# print(temp)
# print(temp.shape)
QIm = cv2.cvtColor(QIm, cv2.COLOR_BGR2RGB) # 这一步获取到的颜色不对，因为默认是BRG，要转化成RGB，颜色才正常
pyrD1=cv2.pyrDown(QIm) #向下取样
pyrD2 = cv2.pyrDown(pyrD1) # 向下取样
image_height, image_width, image_depth = pyrD2.shape # 读取图像高宽深度
pyrD3 = QImage(pyrD2, image_width, image_height, image_width * image_depth,QImage.Format_RGB888)
self.label.setPixmap(QPixmap.fromImage(pyrD3))
#cv2.namedWindow("result", cv2.WINDOW_AUTOSIZE)
#cv2.imshow("result", temp)
#if cv2.waitKey(1) & 0xFF == ord('q'):
# break
ret = cam.MV_CC_GetOneFrameTimeout(pData, nDataSize, stFrameInfo, 1000)
if ret == 0:
print("get one frame: Width[%d], Height[%d], nFrameNum[%d]" % (
stFrameInfo.nWidth, stFrameInfo.nHeight, stFrameInfo.nFrameNum))
else:
print("no data[0x%x]" % ret)
if self.g_bExit == True:
del pData
break
#获得所有相机的列表存入cmbSelectDevice中
def SelectDevice(self):
'''选择所有能用的相机到列表中，
gige相机需要配合 sdk 得到。
'''
#得到相机列表
tlayerType = MV_GIGE_DEVICE | MV_USB_DEVICE
# ch:枚举设备 | en:Enum device
ret = MvCamera.MV_CC_EnumDevices(tlayerType, self.deviceList)
if ret != 0:
print("enum devices fail! ret[0x%x]" % ret)
sys.exit()
if self.deviceList.nDeviceNum == 0:
print("find no device!")
sys.exit()
print("Find %d devices!" % self.deviceList.nDeviceNum)
for i in range(0, self.deviceList.nDeviceNum):
mvcc_dev_info = cast(self.deviceList.pDeviceInfo[i], POINTER(MV_CC_DEVICE_INFO)).contents
if mvcc_dev_info.nTLayerType == MV_GIGE_DEVICE:
print("\ngige device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stGigEInfo.chModelName:
strModeName = strModeName + chr(per)
print("device model name: %s" % strModeName)
self.camSelect.addItem(strModeName,i) #写入设备列表。
def pushbutton_function(self):
#do some things
Img=cv2.imread('JP1.JPG') #通过opencv读入一张图片
image_height, image_width, image_depth=Img.shape #读取图像高宽深度
QIm=cv2.cvtColor(Img,cv2.COLOR_BGR2RGB)
QIm=QImage(QIm.data, image_width, image_height, image_width * image_depth,QImage.Format_RGB888)
self.label.setPixmap(QPixmap.fromImage(QIm))
if __name__ == '__main__':
app = QtWidgets.QApplication(sys.argv)
window = mywindow()
window.show()
sys.exit(app.exec_())
上述代码中用到的 Ui_MainWindow.py，放到 MvImport 目录下。
代码如下：
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'mainWindow.ui'
#
# Created by: PyQt5 UI code generator 5.15.0
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_MainWindow(object):
def setupUi(self, MainWindow):
MainWindow.setObjectName("MainWindow")
MainWindow.resize(589, 530)
self.centralwidget = QtWidgets.QWidget(MainWindow)
self.centralwidget.setObjectName("centralwidget")
self.verticalLayout = QtWidgets.QVBoxLayout(self.centralwidget)
self.verticalLayout.setObjectName("verticalLayout")
self.camSelect = QtWidgets.QComboBox(self.centralwidget)
self.camSelect.setObjectName("camSelect")
self.verticalLayout.addWidget(self.camSelect)
self.label = QtWidgets.QLabel(self.centralwidget)
self.label.setObjectName("label")
self.verticalLayout.addWidget(self.label)
self.butopenCam = QtWidgets.QPushButton(self.centralwidget)
self.butopenCam.setObjectName("butopenCam")
self.verticalLayout.addWidget(self.butopenCam)
self.butcloseCam = QtWidgets.QPushButton(self.centralwidget)
self.butcloseCam.setObjectName("butcloseCam")
self.verticalLayout.addWidget(self.butcloseCam)
MainWindow.setCentralWidget(self.centralwidget)
self.menubar = QtWidgets.QMenuBar(MainWindow)
self.menubar.setGeometry(QtCore.QRect(0, 0, 589, 23))
self.menubar.setObjectName("menubar")
MainWindow.setMenuBar(self.menubar)
self.statusbar = QtWidgets.QStatusBar(MainWindow)
self.statusbar.setObjectName("statusbar")
MainWindow.setStatusBar(self.statusbar)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
_translate = QtCore.QCoreApplication.translate
MainWindow.setWindowTitle(_translate("MainWindow", "MainWindow"))
self.label.setText(_translate("MainWindow", "TextLabel"))
self.butopenCam.setText(_translate("MainWindow", "打开相机"))
self.butcloseCam.setText(_translate("MainWindow", "关闭相机"))
在python 虚拟环境中，执行 python TestVideoStream.py 运行，可以看到如下视频中的效果：
如果运行过程中提示模块不存在，可以通过 pip install 命令安装相应的模块，建议使用清华源，如 安装 opencv-python，命令如下：
pip install opencv-python==4.1.2.30 -i https://pypi.tuna.tsinghua.edu.cn/simple
通过视频中的效果可以看出：虽然实现了视频流的实时获取和显示，但是无法直接对接前端展示，不够友好。
四、最终代码（完整版）
之前的两个测试代码，仅作为测试参考，并非最终代码！！！
此段落中的代码，才是最终代码，可以重点参考！！！
使用 Python + OpenCV + Flask 实现，可以满足视频实时获取，并返回通过GET请求返回给前端进行实时显示，也可以抓取图片，保存上传。
1、添加依赖文件
将 *C:\Program Files (x86)\MVS\Development\Samples\Python* 目录下的 MvImport 目录，copy到自己的工程目录下。
2、安装插件 DirectShow
1）进入第三方插件 DirectShow 路径
cd C:\Program Files (x86)\MVS\Development\ThirdPartyPlatformAdapter\DirectShow\x64\MvDSS2
2）安装 DirectShow
使用 管理员权限 运行 InstallDSSvc_x64.bat
说明：本人使用的是64位Windows操作系统，运行代码也是基于64位运行，故而使用该版本；32位系统在上一目录中也存在，大家可以根据实际情况进行安装。
3、安装依赖模块
1）安装 opencv-python
pip install opencv-python==4.1.2.30 -i https://pypi.tuna.tsinghua.edu.cn/simple
个人使用的是 Python 3.8.5，opencv-python 对应使用 4.1.2.30 版本即可。
如果使用的 opencv-python 的版本过高，可能报如下错误：
cv2.error: Unknown C++ exception from OpenCV code.
2）安装 Flask
pip install flask -i https://pypi.tuna.tsinghua.edu.cn/simple
也可以指定 Flask 的版本，如：
pip install flask=2.2.2 -i https://pypi.tuna.tsinghua.edu.cn/simple
4、核心代码
工程代码结构如下：
0）index.html
在工程中创建 templates 目录，用于存放 index.hml
<html>
<head>
</head>
<body>
<h1>拍照预览</h1>
<img src="{{ url_for('startPreview') }}" width="50%">
</body>
</html>
1）JsonResponse.py
用于规范返回给前端的数据类型，代码如下：
# -- coding: utf-8 --
class JsonResponse(object):
"""
统一的json返回格式
"""
def __init__(self, code, msg, data):
self.code = code
self.msg = msg
self.data = data
@classmethod
def success(cls, code=0, msg='success', data=None):
return cls(code, msg, data)
@classmethod
def error(cls, code=-1, msg='error', data=None):
return cls(code, msg, data)
def to_dict(self):
return {
"code": self.code,
"msg": self.msg,
"data": self.data
}
2）JsonFlask.py
用于重定义数据返回格式，代码如下：
# -- coding: utf-8 --
from flask import Flask, jsonify
from JsonResponse import *
class JsonFlask(Flask):
def make_response(self, rv):
"""视图函数可以直接返回: list、dict、None"""
if rv is None or isinstance(rv, (list, dict)):
rv = JsonResponse.success(rv)
if isinstance(rv, JsonResponse):
rv = jsonify(rv.to_dict())
return super().make_response(rv)
3）HikRobotCamera.py
核心代码文件，实现如下功能：
开始预览视频流、停止预览视频流、获取图片、记录日志等功能。
代码如下：
# -- coding: utf-8 --
import cv2
from flask import Flask, render_template, Response
import sys
import msvcrt
import base64
import datetime
import logging
sys.path.append("./MvImport")
from MvCameraControl_class import *
from JsonResponse import *
from JsonFlask import *
logging.basicConfig(level=logging.DEBUG,#控制台打印的日志级别
filename='hikrobot.log',
filemode='a',##模式，有w和a，w就是写模式，每次都会重新写日志，覆盖之前的日志
#a是追加模式，默认如果不写的话，就是追加模式
format=
'%(asctime)s - %(pathname)s[line:%(lineno)d] - %(levelname)s: %(message)s'
#日志格式
)
# 这里配置一下 template_folder为当前目录，不然可以找不到 index.html
app = JsonFlask(__name__, template_folder='.')
# index
@app.route('/')
def index():
return render_template('./templates/index.html')
# 获取码流
def generate(cap):
# 捕获异常信息
try:
while True:
# 如果是关闭相机，先退出取视频流的循环
global open
if (not open):
break;
retgrab = cap.grab()
if retgrab == True:
logging.debug("Grab true")
ret1, frame = cap.retrieve()
# print(type(frame))
if frame is None:
logging.error("frame is None")
continue
ret1, jpeg = cv2.imencode('.jpg', frame)
jpg_frame = jpeg.tobytes()
yield (b'--frame\r\n'
b'Content-Type: image/jpeg\r\n\r\n' + jpg_frame + b'\r\n')
except Exception as e:
logging.error("generate error: %s" % str(e))
# 开始预览
@app.route('/startPreview')
def startPreview():
logging.info("======================================")
logging.info("start to preview video stream, current_time: " + str(datetime.datetime.now()))
# 全局变量，用于控制获取视频流的开关状态
global open
open = True
# 全局变量，获取视频连接
global cap
cap = cv2.VideoCapture(1)
if False == cap.isOpened():
logging.error("can't open camera")
quit()
else:
logging.info("start to open camera")
logging.info("open camera ok")
# 分辨率设置 3072*2048（海康机器人工业相机 MV-CU060-10GM）
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 3072)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 2048)
# 帧率配置
cap.set(cv2.CAP_PROP_FPS, 15)
return Response(generate(cap), mimetype='multipart/x-mixed-replace;boundary=frame')
# 停止预览
@app.route('/stopPreview')
def stopPreview():
logging.info("======================================")
logging.info("stop to preview video stream, current_time: " + str(datetime.datetime.now()))
logging.info("start to close camera")
# 全局变量，用于停止循环
global open
open = False
logging.info("release resources start")
# 全局变量，用于释放相机资源
try:
global cap
cap.release()
cv2.destroyAllWindows()
except Exception as e:
logging.error("stopPreview error: %s" % str(e))
logging.info("release resources end")
logging.info("camera closed successfully, current_time: " + str(datetime.datetime.now()))
logging.info("======================================")
return "stop to preview"
@app.route('/openAndSave')
def openAndSave():
logging.info("======================================")
logging.info("start to grab image, current_time: " + str(datetime.datetime.now()))
code = 100000
msg = "连接相机时发生错误"
# img_base64 = None
try:
deviceList = MV_CC_DEVICE_INFO_LIST()
tlayerType = MV_GIGE_DEVICE | MV_USB_DEVICE
# ch:枚举设备 | en:Enum device
ret = MvCamera.MV_CC_EnumDevices(tlayerType, deviceList)
if ret != 0:
logging.error("enum devices fail! ret[0x%x]" % ret)
sys.exit()
if deviceList.nDeviceNum == 0:
logging.error("find no device!")
sys.exit()
logging.info("find %d devices!" % deviceList.nDeviceNum)
for i in range(0, deviceList.nDeviceNum):
mvcc_dev_info = cast(deviceList.pDeviceInfo[i], POINTER(MV_CC_DEVICE_INFO)).contents
if mvcc_dev_info.nTLayerType == MV_GIGE_DEVICE:
logging.info("\ngige device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stGigEInfo.chModelName:
strModeName = strModeName + chr(per)
logging.info("device model name: %s" % strModeName)
nip1 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0xff000000) >> 24)
nip2 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x00ff0000) >> 16)
nip3 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x0000ff00) >> 8)
nip4 = (mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x000000ff)
logging.info("current ip: %d.%d.%d.%d\n" % (nip1, nip2, nip3, nip4))
elif mvcc_dev_info.nTLayerType == MV_USB_DEVICE:
logging.info("\nu3v device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chModelName:
if per == 0:
break
strModeName = strModeName + chr(per)
logging.info("device model name: %s" % strModeName)
strSerialNumber = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chSerialNumber:
if per == 0:
break
strSerialNumber = strSerialNumber + chr(per)
logging.info("user serial number: %s" % strSerialNumber)
nConnectionNum = 0
if int(nConnectionNum) >= deviceList.nDeviceNum:
logging.error("intput error!")
sys.exit()
# ch:创建相机实例 | en:Creat Camera Object
cam = MvCamera()
# ch:选择设备并创建句柄 | en:Select device and create handle
stDeviceList = cast(deviceList.pDeviceInfo[int(nConnectionNum)], POINTER(MV_CC_DEVICE_INFO)).contents
ret = cam.MV_CC_CreateHandle(stDeviceList)
if ret != 0:
logging.error("create handle fail! ret[0x%x]" % ret)
sys.exit()
# ch:打开设备 | en:Open device
ret = cam.MV_CC_OpenDevice(MV_ACCESS_Exclusive, 0)
if ret != 0:
logging.error("open device fail! ret[0x%x]" % ret)
sys.exit()
# ch:探测网络最佳包大小(只对GigE相机有效) | en:Detection network optimal package size(It only works for the GigE camera)
if stDeviceList.nTLayerType == MV_GIGE_DEVICE:
nPacketSize = cam.MV_CC_GetOptimalPacketSize()
if int(nPacketSize) > 0:
ret = cam.MV_CC_SetIntValue("GevSCPSPacketSize", nPacketSize)
if ret != 0:
logging.warn("Warning: Set Packet Size fail! ret[0x%x]" % ret)
else:
logging.warn("Warning: Get Packet Size fail! ret[0x%x]" % nPacketSize)
# ch:设置触发模式为off | en:Set trigger mode as off
ret = cam.MV_CC_SetEnumValue("TriggerMode", MV_TRIGGER_MODE_OFF)
if ret != 0:
logging.error("set trigger mode fail! ret[0x%x]" % ret)
sys.exit()
# ch:获取数据包大小 | en:Get payload size
stParam = MVCC_INTVALUE()
memset(byref(stParam), 0, sizeof(MVCC_INTVALUE))
ret = cam.MV_CC_GetIntValue("PayloadSize", stParam)
if ret != 0:
logging.error("get payload size fail! ret[0x%x]" % ret)
sys.exit()
nPayloadSize = stParam.nCurValue
# ch:开始取流 | en:Start grab image
ret = cam.MV_CC_StartGrabbing()
if ret != 0:
logging.error("start grabbing fail! ret[0x%x]" % ret)
sys.exit()
stDeviceList = MV_FRAME_OUT_INFO_EX()
memset(byref(stDeviceList), 0, sizeof(stDeviceList))
data_buf = (c_ubyte * nPayloadSize)()
ret = cam.MV_CC_GetOneFrameTimeout(byref(data_buf), nPayloadSize, stDeviceList, 1000)
if ret == 0:
logging.info("get one frame: Width[%d], Height[%d], nFrameNum[%d]" % (stDeviceList.nWidth, stDeviceList.nHeight, stDeviceList.nFrameNum))
nRGBSize = stDeviceList.nWidth * stDeviceList.nHeight * 3
stConvertParam=MV_SAVE_IMAGE_PARAM_EX()
stConvertParam.nWidth = stDeviceList.nWidth
stConvertParam.nHeight = stDeviceList.nHeight
stConvertParam.pData = data_buf
stConvertParam.nDataLen = stDeviceList.nFrameLen
stConvertParam.enPixelType = stDeviceList.enPixelType
stConvertParam.nImageLen = stConvertParam.nDataLen
stConvertParam.nJpgQuality = 70
stConvertParam.enImageType = MV_Image_Jpeg
stConvertParam.pImageBuffer = (c_ubyte * nRGBSize)()
stConvertParam.nBufferSize = nRGBSize
# ret = cam.MV_CC_ConvertPixelType(stConvertParam)
logging.info("nImageLen: %d" % stConvertParam.nImageLen)
ret = cam.MV_CC_SaveImageEx2(stConvertParam)
if ret != 0:
logging.error("convert pixel fail ! ret[0x%x]" % ret)
del data_buf
sys.exit()
#file_path = "AfterConvert_RGB2.jpg"
#file_open = open(file_path, 'wb+')
#file_open = open(file_path.encode('utf8'), 'wb')
img_buff = (c_ubyte * stConvertParam.nImageLen)()
cdll.msvcrt.memcpy(byref(img_buff), stConvertParam.pImageBuffer, stConvertParam.nImageLen)
#file_open.write(img_buff)
# 对返回的图片进行 base64 格式转换
img_base64 = "data:image/jpg;base64," + str(base64.b64encode(img_buff)).split("'")[1]
code = 200
msg = "success"
logging.info("Save Image succeed!")
# ch:停止取流 | en:Stop grab image
ret = cam.MV_CC_StopGrabbing()
if ret != 0:
logging.error("stop grabbing fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:关闭设备 | Close device
ret = cam.MV_CC_CloseDevice()
if ret != 0:
logging.error("close deivce fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:销毁句柄 | Destroy handle
ret = cam.MV_CC_DestroyHandle()
if ret != 0:
logging.error("destroy handle fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
del data_buf
except Exception as e:
logging.error("openAndSave error: %s" % str(e))
# print("openAndSave finished, current_time: " + str(datetime.datetime.now()))
return JsonResponse(code, msg, img_base64)
# 执行web服务, 端口号可自行修订
logging.info("start to run camera app, current_time: " + str(datetime.datetime.now()))
app.run(host='0.0.0.0', port=65432, debug=True, threaded=True)
5、运行代码
进入Python虚拟环境，执行如下命令：
python HikRobotCamera.py
6、功能验证
1）开始预览
可以将 http://127.0.0.1:65432/startPreview 在前端用 img 标签 显示视频的实时预览效果。
http://127.0.0.1:65432/startPreview
2）停止预览
由于使用的这款海康机器人工业相机（MV-CU060-10GM）只能创建一个连接，所以，当预览完实时视频，需要调用该接口释放相机资源，避免资源被长期占用。
http://127.0.0.1:65432/stopPreview
3）获取图片
返回 base64 格式 的图片，前端可以直接接收显示，调用上传接口保存。
http://127.0.0.1:65432/openAndSave
7、运行效果
由于网速问题和相机没有光圈，相机的拍摄效果有点不清晰。运行效果如下：
8、日志查看
工程目录下回生产日志文件 hikrobot.log，内容如下：
文章来源：https://www.toymoban.com/news/detail-473271.html
9、彩蛋
HikRobotCamera.py 的改良优化版，对获取图片方法做了简化，更为简洁。代码如下：文章来源地址https://www.toymoban.com/news/detail-473271.html
# -- coding: utf-8 --
import cv2
from flask import Flask, render_template, Response
import sys
import msvcrt
import base64
import datetime
import logging
sys.path.append("./MvImport")
from MvCameraControl_class import *
from JsonResponse import *
from JsonFlask import *
logging.basicConfig(level=logging.DEBUG,#控制台打印的日志级别
filename='hikrobot.log',
filemode='a',##模式，有w和a，w就是写模式，每次都会重新写日志，覆盖之前的日志
#a是追加模式，默认如果不写的话，就是追加模式
format=
'%(asctime)s - %(pathname)s[line:%(lineno)d] - %(levelname)s: %(message)s'
#日志格式
)
# 这里配置一下 template_folder为当前目录，不然可以找不到 index.html
app = JsonFlask(__name__, template_folder='.')
# index
@app.route('/')
def index():
return render_template('./templates/index.html')
# 获取码流
def generate(cap):
# 捕获异常信息
try:
while True:
# 如果是关闭相机，先退出取视频流的循环
global open
if (not open):
break;
retgrab = cap.grab()
if retgrab == True:
logging.debug("Grab true")
ret1, frame = cap.retrieve()
# print(type(frame))
if frame is None:
logging.error("frame is None")
continue
ret1, jpeg = cv2.imencode('.jpg', frame)
jpg_frame = jpeg.tobytes()
yield (b'--frame\r\n'
b'Content-Type: image/jpeg\r\n\r\n' + jpg_frame + b'\r\n')
except Exception as e:
logging.error("generate error: %s" % str(e))
# 开始预览
@app.route('/startPreview')
def startPreview():
logging.info("================== startPreview start ====================")
logging.info("start to preview video stream, current_time: " + str(datetime.datetime.now()))
# 全局变量，用于控制获取视频流的开关状态
try:
global open
open = True
# 全局变量，获取视频连接
global cap
cap = cv2.VideoCapture(1)
if False == cap.isOpened():
logging.error("startPreview -- can't open camera")
quit()
else:
logging.info("startPreview -- start to open camera")
logging.info("startPreview -- open camera ok")
# 分辨率设置 3072*2048（海康机器人工业相机 MV-CU060-10GM）
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 3072)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 2048)
# 帧率配置
cap.set(cv2.CAP_PROP_FPS, 15)
response = Response(generate(cap), mimetype='multipart/x-mixed-replace;boundary=frame')
except Exception as e:
logging.error("startPreview error: %s" % str(e))
return response
# 停止预览
@app.route('/stopPreview')
def stopPreview():
logging.info("================== stopPreview start ====================")
logging.info("stop to preview video stream, current_time: " + str(datetime.datetime.now()))
logging.info("start to close camera")
# 全局变量，用于停止循环
global open
open = False
logging.info("release resources start")
# 全局变量，用于释放相机资源
try:
global cap
cap.release()
cv2.destroyAllWindows()
except Exception as e:
logging.error("stopPreview error: %s" % str(e))
logging.info("release resources end")
logging.info("camera closed successfully, current_time: " + str(datetime.datetime.now()))
logging.info("=================== stopPreview end ===================")
return "stop to preview"
# 获取base64图片
@app.route('/grabImage')
def grabImage():
code = 100000
msg = "连接相机时发生错误"
# 捕获异常信息
try:
print("grabImage -- stopPreview start")
stopPreview()
print("grabImage -- stopPreview end")
# 全局变量，获取视频连接
global cap
cap = cv2.VideoCapture(1)
if False == cap.isOpened():
logging.error("can't open camera")
quit()
else:
logging.info("grabImage -- start to open camera")
logging.info("grabImage -- open camera ok")
# 分辨率设置 3072*2048（海康机器人工业相机 MV-CU060-10GM）
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 3072)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 2048)
# 帧率配置
cap.set(cv2.CAP_PROP_FPS, 15)
retgrab1 = cap.grab()
if retgrab1 == True:
logging.debug("grabImage -- Grab true")
ret1, frame = cap.retrieve()
ret1, jpeg = cv2.imencode('.jpg', frame)
img_buff = jpeg.tobytes()
# 对返回的图片进行 base64 格式转换
img_base64 = "data:image/jpg;base64," + str(base64.b64encode(img_buff)).split("'")[1]
code = 200
msg = "success"
stopPreview()
except Exception as e:
logging.error("generate error: %s" % str(e))
return JsonResponse(code, msg, img_base64)
# 获取base64图片
@app.route('/hik/openAndSave')
def openAndSave():
code = 100000
msg = "连接相机时发生错误"
# 捕获异常信息
try:
logging.info("================= openAndSave start =====================")
# 拍照之前，先停止预览
stopPreview()
logging.info("start to grab image, current_time: " + str(datetime.datetime.now()))
# 全局变量，获取视频连接
global cap
cap = cv2.VideoCapture(1)
if False == cap.isOpened():
logging.error("openAndSave -- can't open camera")
quit()
else:
logging.info("openAndSave -- start to open camera")
logging.info("openAndSave -- open camera ok")
# 分辨率设置 3072*2048（海康机器人工业相机 MV-CU060-10GM）
cap.set(cv2.CAP_PROP_FRAME_WIDTH, 3072)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, 2048)
# 帧率配置
cap.set(cv2.CAP_PROP_FPS, 15)
retgrab1 = cap.grab()
if retgrab1 == True:
logging.debug("openAndSave -- Grab true")
ret1, frame = cap.retrieve()
ret1, jpeg = cv2.imencode('.jpg', frame)
img_buff = jpeg.tobytes()
# 对返回的图片进行 base64 格式转换
img_base64 = "data:image/jpg;base64," + str(base64.b64encode(img_buff)).split("'")[1]
code = 200
msg = "success"
stopPreview()
logging.info("================= openAndSave end =====================")
except Exception as e:
logging.error("openAndSave error: %s" % str(e))
return JsonResponse(code, msg, img_base64)
@app.route('/hik/openAndSave2')
def openAndSave2():
# 拍照之前，先停止预览
stopPreview()
logging.info("======================================")
logging.info("start to grab image, current_time: " + str(datetime.datetime.now()))
code = 100000
msg = "连接相机时发生错误"
# img_base64 = None
try:
deviceList = MV_CC_DEVICE_INFO_LIST()
tlayerType = MV_GIGE_DEVICE | MV_USB_DEVICE
# ch:枚举设备 | en:Enum device
ret = MvCamera.MV_CC_EnumDevices(tlayerType, deviceList)
if ret != 0:
logging.error("enum devices fail! ret[0x%x]" % ret)
sys.exit()
if deviceList.nDeviceNum == 0:
logging.error("find no device!")
sys.exit()
logging.info("find %d devices!" % deviceList.nDeviceNum)
for i in range(0, deviceList.nDeviceNum):
mvcc_dev_info = cast(deviceList.pDeviceInfo[i], POINTER(MV_CC_DEVICE_INFO)).contents
if mvcc_dev_info.nTLayerType == MV_GIGE_DEVICE:
logging.info("\ngige device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stGigEInfo.chModelName:
strModeName = strModeName + chr(per)
logging.info("device model name: %s" % strModeName)
nip1 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0xff000000) >> 24)
nip2 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x00ff0000) >> 16)
nip3 = ((mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x0000ff00) >> 8)
nip4 = (mvcc_dev_info.SpecialInfo.stGigEInfo.nCurrentIp & 0x000000ff)
logging.info("current ip: %d.%d.%d.%d\n" % (nip1, nip2, nip3, nip4))
elif mvcc_dev_info.nTLayerType == MV_USB_DEVICE:
logging.info("\nu3v device: [%d]" % i)
strModeName = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chModelName:
if per == 0:
break
strModeName = strModeName + chr(per)
logging.info("device model name: %s" % strModeName)
strSerialNumber = ""
for per in mvcc_dev_info.SpecialInfo.stUsb3VInfo.chSerialNumber:
if per == 0:
break
strSerialNumber = strSerialNumber + chr(per)
logging.info("user serial number: %s" % strSerialNumber)
nConnectionNum = 0
if int(nConnectionNum) >= deviceList.nDeviceNum:
logging.error("intput error!")
sys.exit()
# ch:创建相机实例 | en:Creat Camera Object
cam = MvCamera()
# ch:选择设备并创建句柄 | en:Select device and create handle
stDeviceList = cast(deviceList.pDeviceInfo[int(nConnectionNum)], POINTER(MV_CC_DEVICE_INFO)).contents
ret = cam.MV_CC_CreateHandle(stDeviceList)
if ret != 0:
logging.error("create handle fail! ret[0x%x]" % ret)
sys.exit()
# ch:打开设备 | en:Open device
ret = cam.MV_CC_OpenDevice(MV_ACCESS_Exclusive, 0)
if ret != 0:
logging.error("open device fail! ret[0x%x]" % ret)
sys.exit()
# ch:探测网络最佳包大小(只对GigE相机有效) | en:Detection network optimal package size(It only works for the GigE camera)
if stDeviceList.nTLayerType == MV_GIGE_DEVICE:
nPacketSize = cam.MV_CC_GetOptimalPacketSize()
if int(nPacketSize) > 0:
ret = cam.MV_CC_SetIntValue("GevSCPSPacketSize", nPacketSize)
if ret != 0:
logging.warn("Warning: Set Packet Size fail! ret[0x%x]" % ret)
else:
logging.warn("Warning: Get Packet Size fail! ret[0x%x]" % nPacketSize)
# ch:设置触发模式为off | en:Set trigger mode as off
ret = cam.MV_CC_SetEnumValue("TriggerMode", MV_TRIGGER_MODE_OFF)
if ret != 0:
logging.error("set trigger mode fail! ret[0x%x]" % ret)
sys.exit()
# ch:获取数据包大小 | en:Get payload size
stParam = MVCC_INTVALUE()
memset(byref(stParam), 0, sizeof(MVCC_INTVALUE))
ret = cam.MV_CC_GetIntValue("PayloadSize", stParam)
if ret != 0:
logging.error("get payload size fail! ret[0x%x]" % ret)
sys.exit()
nPayloadSize = stParam.nCurValue
# ch:开始取流 | en:Start grab image
ret = cam.MV_CC_StartGrabbing()
if ret != 0:
logging.error("start grabbing fail! ret[0x%x]" % ret)
sys.exit()
stDeviceList = MV_FRAME_OUT_INFO_EX()
memset(byref(stDeviceList), 0, sizeof(stDeviceList))
data_buf = (c_ubyte * nPayloadSize)()
ret = cam.MV_CC_GetOneFrameTimeout(byref(data_buf), nPayloadSize, stDeviceList, 1000)
if ret == 0:
logging.info("get one frame: Width[%d], Height[%d], nFrameNum[%d]" % (stDeviceList.nWidth, stDeviceList.nHeight, stDeviceList.nFrameNum))
nRGBSize = stDeviceList.nWidth * stDeviceList.nHeight * 3
stConvertParam=MV_SAVE_IMAGE_PARAM_EX()
stConvertParam.nWidth = stDeviceList.nWidth
stConvertParam.nHeight = stDeviceList.nHeight
stConvertParam.pData = data_buf
stConvertParam.nDataLen = stDeviceList.nFrameLen
stConvertParam.enPixelType = stDeviceList.enPixelType
stConvertParam.nImageLen = stConvertParam.nDataLen
stConvertParam.nJpgQuality = 70
stConvertParam.enImageType = MV_Image_Jpeg
stConvertParam.pImageBuffer = (c_ubyte * nRGBSize)()
stConvertParam.nBufferSize = nRGBSize
# ret = cam.MV_CC_ConvertPixelType(stConvertParam)
logging.info("nImageLen: %d" % stConvertParam.nImageLen)
ret = cam.MV_CC_SaveImageEx2(stConvertParam)
if ret != 0:
logging.error("convert pixel fail ! ret[0x%x]" % ret)
del data_buf
sys.exit()
#file_path = "AfterConvert_RGB2.jpg"
#file_open = open(file_path, 'wb+')
#file_open = open(file_path.encode('utf8'), 'wb')
img_buff = (c_ubyte * stConvertParam.nImageLen)()
cdll.msvcrt.memcpy(byref(img_buff), stConvertParam.pImageBuffer, stConvertParam.nImageLen)
#file_open.write(img_buff)
# 对返回的图片进行 base64 格式转换
img_base64 = "data:image/jpg;base64," + str(base64.b64encode(img_buff)).split("'")[1]
code = 200
msg = "success"
logging.info("Save Image succeed!")
# ch:停止取流 | en:Stop grab image
ret = cam.MV_CC_StopGrabbing()
if ret != 0:
logging.error("stop grabbing fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:关闭设备 | Close device
ret = cam.MV_CC_CloseDevice()
if ret != 0:
logging.error("close deivce fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
# ch:销毁句柄 | Destroy handle
ret = cam.MV_CC_DestroyHandle()
if ret != 0:
logging.error("destroy handle fail! ret[0x%x]" % ret)
del data_buf
sys.exit()
del data_buf
except Exception as e:
logging.error("openAndSave error: %s" % str(e))
# print("openAndSave finished, current_time: " + str(datetime.datetime.now()))
return JsonResponse(code, msg, img_base64)
# 执行web服务, 端口号可自行修订
logging.info("start to run camera app, current_time: " + str(datetime.datetime.now()))
if __name__ == '__main__':
try:
app.run(host='0.0.0.0', port=65432, debug=True, threaded=True)
except Exception as e:
logging.error("app error: %s" % str(e))
到了这里，关于Python 实现海康机器人工业相机 MV-CU060-10GM 的实时显示视频流及拍照功能的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！
