问题描述
QCA6174 5G WiFi 52信道检测到雷达之后，手动设置36信道会自动跳到48信道，手动固定信道也会跳转，正常36信道为非dfs雷达信道，手动固定信道应该正常才对。在52信道没有检测到雷达之前，设置固定信道是正常的，但是检测到雷达之后，发现固定信道也会出问题文章来源地址https://www.toymoban.com/news/detail-517399.html
WCNSS_qcom_cfg.ini
# This file allows user to override the factory
# defaults for the WLAN Driver
# Enable IMPS or not
gEnableImps=1
# Enable/Disable Idle Scan
gEnableIdleScan=0
# Increase sleep duration (seconds) during IMPS
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
# unnecessary if Idle Scan is disabled.
gImpsModSleepTime=0
# Enable BMPS or not
gEnableBmps=1
# Enable suspend or not
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
gEnableSuspend=3
# Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
# 7 = 11b only 8 = 11ac only.
gDot11文章来源：https://www.toymoban.com/news/detail-517399.html
到了这里，关于【QCA6174】QCA6174 5G WiFi 52信道检测到雷达之后，手动设置36信道会自动跳到48信道或者其他信道问题分析的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！
![[WiFi] WiFi 5G DFS机制及认证](https://imgs.yssmx.com/Uploads/2024/01/797642-1.png)
