只需要在仿真对话框中勾选使能优化。
打开优化选项,勾选Apply full visibility to all modules选项就可以了。
这时候你可以在仿真栏的Visibility栏看到+acc字样就可以正常仿真出结果了。
其实在破解文档里已经说了
Note: The new version of the program can no longer use the -novopt option vsim command, just replace -novopt with -voptargs=+acc, and there will be no situations where the signal is optimized and cannot be displayed.文章来源:https://www.toymoban.com/news/detail-566586.html
只是acc可以直接点点鼠标就启用了。文章来源地址https://www.toymoban.com/news/detail-566586.html
到了这里,关于Modelsim SE-64 2020.4 不能关闭优化的错误及其解决 Error (suppressible): (vsim-12110)的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!