云原生|kubernetes|kubernetes集群部署神器kubekey的初步使用（centos7下的kubekey使用）

前言:

kubernetes集群的安装部署是学习kubernetes所需要面对的第一个难关，确实是非常不好部署的，尤其是二进制方式，虽然有minikube，kubeadm大大的简化了kubernetes的部署难度，那么，针对我们的学习环境或者测试环境，我们应该如何能够快速的，简单的，非常优雅的部署一个学习或者测试用的kubernetes集群呢？

目前来说，版本答案就是kubekey项目了，也就是kk

该项目针对kubernetes集群的部署难度，极大的降低了kubernetes集群的部署门槛，可以非常迅速的部署单master集群，多master高可用集群，通常部署安装可能至多需要10来分钟（在线安装的话），如果是离线方式安装那么部署时间可缩短到 1 2 分钟。

本文将就kubekey部署kubernetes单master集群做一个简单的描述。

一，

kubekey项目的下载地址

Releases · kubesphere/kubekey · GitHub

 大概翻译一下About，该项目的简介说的是，kubekey可以仅安装kubernetes集群，也可以安装kubernetes集群和kubesphere，并且支持多云架构，支持多工作节点，高可用kubernetes集群。

那么，需要注意的是，kubekey由于是kubesphere公司的一个子项目，因此，和kubesphere是没有解耦的，也就是说，要么用kubekey安装kubernetes集群，要么用kubekey安装kubernetes集群和kubesphere，两个同时安装，不能只使用kubekey安装kubesphere

OK，本文将仅仅使用kubekey安装部署一个单master的kubernetes集群（在线部署，注意，不是离线的方式，还没研究出来呢）

作为一个安装工具，当然是使用最新版的比较好了，因为支持的kubernetes版本够多，bug修复的够多，功能也够多嘛

我由于是演示性质，因此随意选择了一个版本下载，本文使用的版本是kubekey-v3.1.0-alpha.0-linux-amd64.tar.gz

可以看到最新版3.0.8还是比较香的，基本都是最新的技术啦，如果想体验高版本的kubernetes的快乐，自然是此版本比较合适的

二，

kubekey使用的先决条件

 大概翻译一下

第一，服务器系统需要2核CPU，4G内存，至少20G的磁盘使用空间

第二，ssh服务是正常的，通过ssh服务可以访问到所有节点

第三，curl，openssl命令可以sudo，假如是使用普通用户部署的情况下

第四，docker环境

第五，selinux关闭了或者已做了相关配置，建议是直接关闭selinux

第六，最好是干净的刚安装完毕系统的服务器

第七，需要安装socat，conntrack，这两个是关键依赖，必须安装的，ebtables，ipset，ipvsadm中等依赖，可不安装，但最好安装

总结一哈，在centos7下那就是需要docker环境（可以不安装，等kubekey来安装），时间服务器，sshd，服务器密码，关闭selinux和防火墙，可用的外部yum源，最好是有epel源和基础源。

安装依赖，安装命令为：

yum install conntrack socat ipset  ipvsadm ebtables -y

本例使用的是两台服务器的信息是：

IP：192.168.123.11 192.168.123.12 操作系统版本是centos7

[root@node1 ~]# cat /etc/redhat-release 
CentOS Linux release 7.7.1908 (Core)

那么，我们在kubeadm或者二进制部署的时候，还经常有升级内核这些步骤，为什么kubekey这里没有提到呢？ 其实，内核的升级只是让kubernetes集群更加稳定而已，考虑到此次部署工作的目的是测试环境或者学习环境，因此，内核可以不需要升级。

三，

kubekey生成部署配置文件

基本上kubekey和kubeadm是比较相似的，是可以使用配置文件的，也就是配置文件内写如何部署安装kubernetes，然后告诉kubekey吧

在kubekey的官网，我们使用它的高阶部署方式，也就是配置文件方式

####注，kubekey的二进制安装包建议放置在master节点，解压后直接使用即可

生成配置文件

./kk create config [--with-kubernetes version] [--with-kubesphere version] [(-f | --filename) path]

根据示例命令，编写下面这个命令，生成配置文件1.22.yaml

./kk create config with-kubernetes 1.22.16 -f 1.22.yaml

文件内容如下：

[root@node1 ~]# vim 1.22.yaml 
[root@node1 ~]# cat  1.22.yaml 

apiVersion: kubekey.kubesphere.io/v1alpha2
kind: Cluster
metadata:
  name: sample
spec:
  hosts:
  - {name: node1, address: 172.16.0.2, internalAddress: 172.16.0.2, user: ubuntu, password: "Qcloud@123"}
  - {name: node2, address: 172.16.0.3, internalAddress: 172.16.0.3, user: ubuntu, password: "Qcloud@123"}
  roleGroups:
    etcd:
    - node1
    control-plane: 
    - node1
    worker:
    - node1
    - node2
  controlPlaneEndpoint:
    ## Internal loadbalancer for apiservers 
    # internalLoadbalancer: haproxy

    domain: lb.kubesphere.local
    address: ""
    port: 6443
  kubernetes:
    version: v1.23.10
    clusterName: cluster.local
    autoRenewCerts: true
    containerManager: docker
  etcd:
    type: kubekey
  network:
    plugin: calico
    kubePodsCIDR: 10.233.64.0/18
    kubeServiceCIDR: 10.233.0.0/18
    ## multus support. https://github.com/k8snetworkplumbingwg/multus-cni
    multusCNI:
      enabled: false
  registry:
    privateRegistry: ""
    namespaceOverride: ""
    registryMirrors: []
    insecureRegistries: []
  addons: []

很显然，该文件还是有很多不符合我们的预期的，需要修改，修改后的文件内容如下：

###主要是IP地址，密码和CIDR的修改

apiVersion: kubekey.kubesphere.io/v1alpha2
kind: Cluster
metadata:
  name: sample
spec:
  hosts:
  - {name: node1, address: 192.168.123.11, internalAddress: 192.168.123.11, user: root, password: "密码"}
  - {name: node2, address: 192.168.123.12, internalAddress: 192.168.123.12, user: root, password: "密码"}
  roleGroups:
    etcd:
    - node1
    control-plane:
    - node1
    worker:
    - node1
    - node2
  controlPlaneEndpoint:
    ## Internal loadbalancer for apiservers 
    # internalLoadbalancer: haproxy

    domain: lb.kubesphere.local
    address: ""
    port: 6443
  kubernetes:
    version: 1.22.16
    clusterName: cluster.local
    autoRenewCerts: true
    containerManager: docker
  etcd:
    type: kubekey
  network:
    plugin: calico
    kubePodsCIDR: 10.244.0.0/24
    kubeServiceCIDR: 10.96.0.0/24
    ## multus support. https://github.com/k8snetworkplumbingwg/multus-cni
    multusCNI:
      enabled: false
  registry:
    privateRegistry: ""
    namespaceOverride: ""
    registryMirrors: []
    insecureRegistries: []
  addons: []

四，

kubekey应用修改后的配置文件开始正式部署

./kk create cluster -f 1.22.yaml

在开始部署前，由于防火墙的原因，我们需要增加一个环境变量，使用国内的镜像等等，也就是国产化 

export KKZONE=cn

命令的输出大概如下：

####注，表格内全是y就可以了，直接输入yes，开始安装

[root@centos1 ~]# ./kk create cluster -f 123.yaml 


 _   __      _          _   __           
| | / /     | |        | | / /           
| |/ / _   _| |__   ___| |/ /  ___ _   _ 
|    \| | | | '_ \ / _ \    \ / _ \ | | |
| |\  \ |_| | |_) |  __/ |\  \  __/ |_| |
\_| \_/\__,_|_.__/ \___\_| \_/\___|\__, |
                                    __/ |
                                   |___/

11:52:54 CST [GreetingsModule] Greetings
11:52:54 CST message: [node2]
Greetings, KubeKey!
11:52:55 CST message: [node1]
Greetings, KubeKey!
11:52:55 CST success: [node2]
11:52:55 CST success: [node1]
11:52:55 CST [NodePreCheckModule] A pre-check on nodes
11:53:01 CST success: [node2]
11:53:01 CST success: [node1]
11:53:01 CST [ConfirmModule] Display confirmation form
+-------+------+------+---------+----------+-------+-------+---------+-----------+--------+--------+------------+------------+-------------+------------------+--------------+
| name  | sudo | curl | openssl | ebtables | socat | ipset | ipvsadm | conntrack | chrony | docker | containerd | nfs client | ceph client | glusterfs client | time         |
+-------+------+------+---------+----------+-------+-------+---------+-----------+--------+--------+------------+------------+-------------+------------------+--------------+
| node1 | y    | y    | y       | y        | y     | y     |         | y         |        |        |            |            |             |                  | CST 11:53:01 |
| node2 | y    | y    | y       | y        | y     | y     |         | y         |        |        |            |            |             |                  | CST 11:52:55 |
+-------+------+------+---------+----------+-------+-------+---------+-----------+--------+--------+------------+------------+-------------+------------------+--------------+

This is a simple check of your environment.
Before installation, ensure that your machines meet all requirements specified at
https://github.com/kubesphere/kubekey#requirements-and-recommendations

Continue this installation? [yes/no]: 

 yes后，开始下载组件并执行安装了，可以看到下载了kubeadm，并且用了很多脚本：

11:54:24 CST success: [LocalHost]
11:54:24 CST [NodeBinariesModule] Download installation binaries
11:54:24 CST message: [localhost]
downloading amd64 kubeadm v1.22.16 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 43.7M  100 43.7M    0     0   998k      0  0:00:44  0:00:44 --:--:-- 1031k
11:55:09 CST message: [localhost]
downloading amd64 kubelet v1.22.16 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  115M  100  115M    0     0  1017k      0  0:01:56  0:01:56 --:--:-- 1078k
11:57:06 CST message: [localhost]
downloading amd64 kubectl v1.22.16 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 44.7M  100 44.7M    0     0  1017k      0  0:00:45  0:00:45 --:--:-- 1151k
11:57:51 CST message: [localhost]
downloading amd64 helm v3.9.0 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 44.0M  100 44.0M    0     0  1012k      0  0:00:44  0:00:44 --:--:-- 1082k
11:58:36 CST message: [localhost]
downloading amd64 kubecni v1.2.0 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 38.6M  100 38.6M    0     0  1008k      0  0:00:39  0:00:39 --:--:-- 1143k
11:59:16 CST message: [localhost]
downloading amd64 crictl v1.24.0 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 13.8M  100 13.8M    0     0  1044k      0  0:00:13  0:00:13 --:--:-- 1154k
11:59:29 CST message: [localhost]
downloading amd64 etcd v3.4.13 ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 16.5M  100 16.5M    0     0  1012k      0  0:00:16  0:00:16 --:--:-- 1066k
11:59:46 CST message: [localhost]
downloading amd64 docker 20.10.8 ...

最终的输出如下：

poddisruptionbudget.policy/calico-kube-controllers created
12:05:00 CST success: [node1]
12:05:00 CST [ConfigureKubernetesModule] Configure kubernetes
12:05:00 CST success: [node1]
12:05:00 CST [ChownModule] Chown user $HOME/.kube dir
12:05:00 CST success: [node2]
12:05:00 CST success: [node1]
12:05:00 CST [AutoRenewCertsModule] Generate k8s certs renew script
12:05:01 CST success: [node1]
12:05:01 CST [AutoRenewCertsModule] Generate k8s certs renew service
12:05:02 CST success: [node1]
12:05:02 CST [AutoRenewCertsModule] Generate k8s certs renew timer
12:05:02 CST success: [node1]
12:05:02 CST [AutoRenewCertsModule] Enable k8s certs renew service
12:05:03 CST success: [node1]
12:05:03 CST [SaveKubeConfigModule] Save kube config as a configmap
12:05:03 CST success: [LocalHost]
12:05:03 CST [AddonsModule] Install addons
12:05:03 CST success: [LocalHost]
12:05:03 CST Pipeline[CreateClusterPipeline] execute successfully
Installation is complete.

Please check the result using the command:
		
	kubectl get pod -A

非常简单的，等待10来分钟一个可用的kubernetes-1.22.16版本的集群就部署好了

五，

小结：

kubekey到底在kubernetes集群安装中做了些什么工作呢？这样的集群有什么缺陷吗？

1，

kubekey大体做的有下载二进制kubernetes的部分组件，例如，kubelet，kubeadm，helm，还有一些脚本，配置文件等等

具体的目录在kubekey这个文件夹下：

[root@node1 kubekey]# ll
total 12
drwxr-xr-x. 3 root root   20 Jul 16 11:58 cni
-rw-r--r--. 1 root root 5667 Jul 16 12:04 config-sample
drwxr-xr-x. 3 root root   21 Jul 16 11:59 crictl
drwxr-xr-x. 3 root root   21 Jul 16 11:59 docker
drwxr-xr-x. 3 root root   21 Jul 16 11:59 etcd
drwxr-xr-x. 3 root root   20 Jul 16 11:57 helm
drwxr-xr-x. 3 root root   22 Jul 16 11:54 kube
drwxr-xr-x. 2 root root   53 Jul 16 11:52 logs
drwxr-xr-x. 2 root root 4096 Jul 16 12:37 node1
drwxr-xr-x. 2 root root  137 Jul 16 12:04 node2
drwxr-xr-x. 3 root root   18 Jul 16 12:03 pki

更多安装细节在logs目录下的日志文件内，感兴趣的同学可以去研究研究，其实，初始化系统那个脚本是值得一看的

[root@node1 node1]# ls
10-kubeadm.conf      backup-etcd.timer  daemon.json     etcd-backup.sh  etcd.service  k8s-certs-renew.service  k8s-certs-renew.timer  kubelet.service      nodelocaldnsConfigmap.yaml
backup-etcd.service  coredns-svc.yaml   docker.service  etcd.env        initOS.sh     k8s-certs-renew.sh       kubeadm-config.yaml    network-plugin.yaml  nodelocaldns.yaml
[root@node1 node1]# pwd
/root/kubekey/node1

可以看到，初始化脚本关闭了防火墙，selinux并做了内核优化这些工作 

[root@node1 node1]# cat initOS.sh 
#!/usr/bin/env bash

# Copyright 2020 The KubeSphere Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

swapoff -a
sed -i /^[^#]*swap*/s/^/\#/g /etc/fstab

# See https://github.com/kubernetes/website/issues/14457
if [ -f /etc/selinux/config ]; then 
  sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
fi
# for ubuntu: sudo apt install selinux-utils
# for centos: yum install selinux-policy
if command -v setenforce &> /dev/null
then
  setenforce 0
  getenforce
fi

echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
echo 'net.bridge.bridge-nf-call-arptables = 1' >> /etc/sysctl.conf
echo 'net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf
echo 'net.bridge.bridge-nf-call-iptables = 1' >> /etc/sysctl.conf
echo 'net.ipv4.ip_local_reserved_ports = 30000-32767' >> /etc/sysctl.conf
echo 'vm.max_map_count = 262144' >> /etc/sysctl.conf
echo 'vm.swappiness = 1' >> /etc/sysctl.conf
echo 'fs.inotify.max_user_instances = 524288' >> /etc/sysctl.conf
echo 'kernel.pid_max = 65535' >> /etc/sysctl.conf


#See https://imroc.io/posts/kubernetes/troubleshooting-with-kubernetes-network/
sed -r -i "s@#{0,}?net.ipv4.tcp_tw_recycle ?= ?(0|1)@net.ipv4.tcp_tw_recycle = 0@g" /etc/sysctl.conf

sed -r -i  "s@#{0,}?net.ipv4.ip_forward ?= ?(0|1)@net.ipv4.ip_forward = 1@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?net.bridge.bridge-nf-call-arptables ?= ?(0|1)@net.bridge.bridge-nf-call-arptables = 1@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?net.bridge.bridge-nf-call-ip6tables ?= ?(0|1)@net.bridge.bridge-nf-call-ip6tables = 1@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?net.bridge.bridge-nf-call-iptables ?= ?(0|1)@net.bridge.bridge-nf-call-iptables = 1@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?net.ipv4.ip_local_reserved_ports ?= ?([0-9]{1,}-{0,1},{0,1}){1,}@net.ipv4.ip_local_reserved_ports = 30000-32767@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?vm.max_map_count ?= ?([0-9]{1,})@vm.max_map_count = 262144@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?vm.swappiness ?= ?([0-9]{1,})@vm.swappiness = 1@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?fs.inotify.max_user_instances ?= ?([0-9]{1,})@fs.inotify.max_user_instances = 524288@g" /etc/sysctl.conf
sed -r -i  "s@#{0,}?kernel.pid_max ?= ?([0-9]{1,})@kernel.pid_max = 65535@g" /etc/sysctl.conf

tmpfile="$$.tmp"
awk ' !x[$0]++{print > "'$tmpfile'"}' /etc/sysctl.conf
mv $tmpfile /etc/sysctl.conf

systemctl stop firewalld 1>/dev/null 2>/dev/null
systemctl disable firewalld 1>/dev/null 2>/dev/null
systemctl stop ufw 1>/dev/null 2>/dev/null
systemctl disable ufw 1>/dev/null 2>/dev/null

modinfo br_netfilter > /dev/null 2>&1
if [ $? -eq 0 ]; then
   modprobe br_netfilter
   mkdir -p /etc/modules-load.d
   echo 'br_netfilter' > /etc/modules-load.d/kubekey-br_netfilter.conf
fi

modinfo overlay > /dev/null 2>&1
if [ $? -eq 0 ]; then
   modprobe overlay
   echo 'overlay' >> /etc/modules-load.d/kubekey-br_netfilter.conf
fi

modprobe ip_vs
modprobe ip_vs_rr
modprobe ip_vs_wrr
modprobe ip_vs_sh

cat > /etc/modules-load.d/kube_proxy-ipvs.conf << EOF
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
EOF

modprobe nf_conntrack_ipv4 1>/dev/null 2>/dev/null
if [ $? -eq 0 ]; then
   echo 'nf_conntrack_ipv4' > /etc/modules-load.d/kube_proxy-ipvs.conf
else
   modprobe nf_conntrack
   echo 'nf_conntrack' > /etc/modules-load.d/kube_proxy-ipvs.conf
fi
sysctl -p

sed -i ':a;$!{N;ba};s@# kubekey hosts BEGIN.*# kubekey hosts END@@' /etc/hosts
sed -i '/^$/N;/\n$/N;//D' /etc/hosts

cat >>/etc/hosts<<EOF
# kubekey hosts BEGIN
192.168.123.11  node1.cluster.local node1
192.168.123.12  node2.cluster.local node2
192.168.123.11  lb.kubesphere.local
# kubekey hosts END
EOF

echo 3 > /proc/sys/vm/drop_caches

# Make sure the iptables utility doesn't use the nftables backend.
update-alternatives --set iptables /usr/sbin/iptables-legacy >/dev/null 2>&1 || true
update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy >/dev/null 2>&1 || true
update-alternatives --set arptables /usr/sbin/arptables-legacy >/dev/null 2>&1 || true
update-alternatives --set ebtables /usr/sbin/ebtables-legacy >/dev/null 2>&1 || true

ulimit -u 65535
ulimit -n 65535

2，

kubekey默认安装的kubernetes有哪些地方是不合理的呢？

我认为etcd这个组件的处理事比较差的，因为只是一个单示例etcd，这样的集群是无法用在生产上的。虽然是外部etcd，但不是集群，无法保证集群的稳定

[root@node1 node1]# kubectl get po -A
NAMESPACE     NAME                                       READY   STATUS    RESTARTS   AGE
kube-system   calico-kube-controllers-69cfcfdf6c-2dl2z   1/1     Running   0          41m
kube-system   calico-node-8l2vk                          1/1     Running   0          41m
kube-system   calico-node-plbbn                          1/1     Running   0          41m
kube-system   coredns-5495dd7c88-7746t                   1/1     Running   0          42m
kube-system   coredns-5495dd7c88-gzxl2                   1/1     Running   0          42m
kube-system   kube-apiserver-node1                       1/1     Running   0          42m
kube-system   kube-controller-manager-node1              1/1     Running   0          42m
kube-system   kube-proxy-ld97n                           1/1     Running   0          42m
kube-system   kube-proxy-q7zzm                           1/1     Running   0          41m
kube-system   kube-scheduler-node1                       1/1     Running   0          42m
kube-system   nodelocaldns-9l8lf                         1/1     Running   0          42m
kube-system   nodelocaldns-hw4tn                         1/1     Running   0          41m

[root@node1 node1]# systemctl status etcd
● etcd.service - etcd
   Loaded: loaded (/etc/systemd/system/etcd.service; enabled; vendor preset: disabled)
   Active: active (running) since Sun 2023-07-16 12:03:33 CST; 43min ago
 Main PID: 4872 (etcd)
    Tasks: 15
   Memory: 50.6M
   CGroup: /system.slice/etcd.service
           └─4872 /usr/local/bin/etcd

Jul 16 12:24:24 node1 etcd[4872]: store.index: compact 1888
Jul 16 12:24:24 node1 etcd[4872]: finished scheduled compaction at 1888 (took 400.469µs)
Jul 16 12:29:24 node1 etcd[4872]: store.index: compact 2279
Jul 16 12:29:24 node1 etcd[4872]: finished scheduled compaction at 2279 (took 351.415µs)
Jul 16 12:34:24 node1 etcd[4872]: store.index: compact 2672
Jul 16 12:34:24 node1 etcd[4872]: finished scheduled compaction at 2672 (took 403.899µs)
Jul 16 12:39:24 node1 etcd[4872]: store.index: compact 3063
Jul 16 12:39:24 node1 etcd[4872]: finished scheduled compaction at 3063 (took 355.549µs)
Jul 16 12:44:24 node1 etcd[4872]: store.index: compact 3455
Jul 16 12:44:24 node1 etcd[4872]: finished scheduled compaction at 3455 (took 346.379µs)

其它的地方kubekey表现基本是完美的（kubekey是支持高可用kubernetes集群安装的，但本例没有使用）

下一篇文章讲述如何使用kubekey部署一个高可用的kubernetes集群，并修正上述的etcd问题。文章来源地址https://www.toymoban.com/news/detail-573214.html

到了这里，关于云原生|kubernetes|kubernetes集群部署神器kubekey的初步使用（centos7下的kubekey使用）的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！