【Maven】Setting文件分享

这篇具有很好参考价值的文章主要介绍了【Maven】Setting文件分享。希望对大家有所帮助。如果存在错误或未考虑完全的地方,请大家不吝赐教,您也可以点击"举报违法"按钮提交疑问。

<?xml version="1.0" encoding="UTF-8"?>
 
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->
 
<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
	<localRepository>C:\Maven\maven_repository</localRepository>
  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->
 
  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->
 
  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>
 
  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>
 
  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->
 
    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
  </servers>
 
  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
	    <!-- 阿里云仓库 -->
        <mirror>
            <id>alimaven</id>
            <mirrorOf>central</mirrorOf>
            <name>aliyun maven</name>
            <url>http://maven.aliyun.com/nexus/content/repositories/central/</url>
        </mirror>
 
        <!-- 中央仓库1 -->
        <mirror>
            <id>repo1</id>
            <mirrorOf>central</mirrorOf>
            <name>Human Readable Name for this Mirror.</name>
            <url>http://repo1.maven.org/maven2/</url>
        </mirror>
 
        <!-- 中央仓库2 -->
        <mirror>
            <id>repo2</id>
            <mirrorOf>central</mirrorOf>
            <name>Human Readable Name for this Mirror.</name>
            <url>http://repo2.maven.org/maven2/</url>
        </mirror>
  </mirrors>
 
  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>
      <activation>
        <jdk>1.4</jdk>
      </activation>
      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->
 
    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>
      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>
      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
	<profile>     
      <id>JDK-1.8</id>       
      <activation>       
        <activeByDefault>true</activeByDefault>       
        <jdk>1.8</jdk>       
      </activation>       
      <properties>       
        <maven.compiler.source>1.8</maven.compiler.source>       
        <maven.compiler.target>1.8</maven.compiler.target>       
        <maven.compiler.compilerVersion>1.8</maven.compiler.compilerVersion>       
      </properties>       
    </profile>
  </profiles>
 
  <!-- activeProfiles
   | List of profiles that are active for all builds.
   |
  <activeProfiles>
    <activeProfile>alwaysActiveProfile</activeProfile>
    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
  </activeProfiles>
  -->
</settings>

文章来源地址https://www.toymoban.com/news/detail-621701.html

到了这里,关于【Maven】Setting文件分享的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处: 如若内容造成侵权/违法违规/事实不符,请点击违法举报进行投诉反馈,一经查实,立即删除!

领支付宝红包 赞助服务器费用

相关文章

  • 【Java】Maven配置文件帮助文档(settings.xml 和 pom.xml)

    以下几个属性是 settings 属性的下一级属性: localRepository interactiveMode offline pluginGroups proxies servers mirrors profiles activeProfiles localRepository:本地仓库的路径,默认值为 ${user.home}/.m2/repository interactiveMode:表示Maven是否需要和用户交互以获得输入 offline:表示Maven是否需要在离线模式

    2024年02月13日
    浏览(55)
  • IDea创建Spring或Maven项目缺少src、main、java等文件解决办法

    前言: 我们创建一个Maven、Spring项目时出现文件缺失时,可以进行手动添加文件目录 1、缺失文件时: 2、点击左上角File,选择项目结构 3、选择Modules 4、点击最上面的项目,右键添加新的文件层  5、添加src,右键点击src添加resources和java,单击resource选择Resources 6、点击右下角

    2024年02月13日
    浏览(71)
  • IDEA工具避坑指南(十):git拉取java项目后,拉取后的工程目录下只有.git和.idea文件,没有src或java目录|拉取的maven工程不被识别为maven项目

    用以上标题,找不到合适方案,经过多篇帖子的阅读和反复尝试,遂有下文! 说明: 本机IDEA版本是2019,其他版可能略有差异。 从git上拉取项目后,目录结构如下,缺失想要的src目录 原因可能是多方面的,但是首先想到的应该是拉取工程本身就是这个目录结构。 此时就需要

    2024年02月04日
    浏览(101)
  • springboot+maven插件调用mybatis generator自动生成对应的mybatis.xml文件和java类

    mybatis最繁琐的事就是sql语句和实体类,sql语句写在java文件里很难看,字段多的表一开始写感觉阻力很大,没有耐心,自动生成便成了最称心的做法。自动生成xml文件,dao接口,实体类,虽一直感觉不太优雅,但省去了很多麻烦,当表增加或修改字段的时候重新生成便轻松搞

    2024年02月14日
    浏览(41)
  • 【分享】Mac for Maven安装及配置

    Maven 是一个项目管理工具,可以对 Java 项目进行自动化的构建和依赖管理。 Maven 可以看成知识的积累者,最初是为了简化 Jakarta Turbine 项目中的构建过程。有几个项目,每个项目都有自己的 Ant 构建文件,它们都略有不同。JAR 被检入 CVS。我们想要一种标准的方式来构建项目,

    2024年02月12日
    浏览(34)
  • 【Maven】Maven 中 pom.xml 文件

    Maven 是一个项目管理工具,可以对 Java 项目进行构建和管理依赖。 本文,我们认识下 pom.xml 文件。POM(Project Object Model, 项目对象模型) 是 Maven 工程的基本工作单位,也是 Maven 的核心。其包含项目的基本信息,用于描述项目如何构建、声明项目依赖等。 POM 是 Project Object Mod

    2024年02月15日
    浏览(38)
  • Maven教程_编程入门自学教程_菜鸟教程-免费教程分享

    Maven 是一款基于 Java 平台的项目管理和整合工具,它将项目的开发和管理过程抽象成一个项目对象模型(POM)。开发人员只需要做一些简单的配置,Maven 就可以自动完成项目的编译、测试、打包、发布以及部署等工作。Maven 是使用 Java 语言编写的,因此它和 Java 一样具有跨平

    2024年02月12日
    浏览(50)
  • 【java】【maven】【基础】MAVEN安装配置介绍

    目录 1 下载 2 安装-windows为例  3 配置环境变量  3.1 JAVA_HOME 3.2 MAVEN_HOME 3.3 PATH  3.4 验证 4 MAVEN基础概念 4.1 仓库概念 4.2 坐标概念 4.2.1 打开网址  4.2.2 输入搜索内容junit  4.2.3 找到对应API名称点击  4.2.4 点击对应版本  4.2.5 复制MAVEN坐标 4.3 配置本地仓库 4.3.1 初始默认仓库 4.3

    2024年02月14日
    浏览(39)
  • 【Maven】Maven入门,Java界的Anaconda!

    官方文档:Apache Maven 的本质是一个软件项目管理和理解工具。基于项目对象模型 (Project Object Model,POM) 的概念,Maven 可以从一条中心信息管理项目的构建、报告和文档。 就像Python和Anaconda的关系🤭 可以帮助Javer完成构建、文档生成、报告、依赖、发布、分发等等功能! 可以

    2024年02月08日
    浏览(54)
  • maven本地仓库地址修改+maven国内镜像设置+maven运行所需pos.xml文件配置基本写法

    1,maven本地仓库地址修改 maven在使用过程中,本地项目仓库其空间占用会越来越大,但是其默认仓库位置往往是以C盘为主,C盘作为系统盘常常会遇到所在盘空间占满的情况,所以我们将其改至其他硬盘空间位置为适合做法,我们先进入以下位置; 我们可以在记事本中打开其

    2024年02月15日
    浏览(50)

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

博客赞助

微信扫一扫打赏

请作者喝杯咖啡吧~博客赞助

支付宝扫一扫领取红包,优惠每天领

二维码1

领取红包

二维码2

领红包