Kubernetes概述
使用kubeadm快速部署一个k8s集群
Kubernetes高可用集群二进制部署（一）主机准备和负载均衡器安装
Kubernetes高可用集群二进制部署（二）ETCD集群部署
Kubernetes高可用集群二进制部署（三）部署api-server
Kubernetes高可用集群二进制部署（四）部署kubectl和kube-controller-manager、kube-scheduler
Kubernetes高可用集群二进制部署（五）kubelet、kube-proxy、Calico、CoreDNS
Kubernetes高可用集群二进制部署（六）Kubernetes集群节点添加
1. 工作节点（worker node）部署
1.1 docker安装及配置
wget -O /etc/yum.repos.d/docker-ce.repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum -y install docker-ce
systemctl enable docker
systemctl start docker
cat <<EOF | sudo tee /etc/docker/daemon.json
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors": ["https://8i185852.mirror.aliyuncs.com"]
}
EOF
必须配置native.cgroupdriver，不配置这个步骤会导致kubelet启动失败
systemctl restart docker
1.2 部署kubelet
在k8s-master1（同时作为控制平面和数据平面）上操作
1.2.1 创建kubelet-bootstrap.kubeconfig
BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)
#192.168.10.100 VIP(虚拟IP)
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig
#创建集群角色绑定
kubectl create clusterrolebinding cluster-system-anonymous --clusterrole=cluster-admin --user=kubelet-bootstrap
kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
kubectl describe clusterrolebinding cluster-system-anonymous
kubectl describe clusterrolebinding kubelet-bootstrap
1.2.2 创建kubelet配置文件
[root@k8s-master1 k8s-work]# cat > kubelet.json << "EOF"
{
"kind": "KubeletConfiguration",
"apiVersion": "kubelet.config.k8s.io/v1beta1",
"authentication": {
"x509": {
"clientCAFile": "/etc/kubernetes/ssl/ca.pem"
},
"webhook": {
"enabled": true,
"cacheTTL": "2m0s"
},
"anonymous": {
"enabled": false
}
},
"authorization": {
"mode": "Webhook",
"webhook": {
"cacheAuthorizedTTL": "5m0s",
"cacheUnauthorizedTTL": "30s"
}
},
"address": "192.168.10.103", #当前主机地址
"port": 10250,
"readOnlyPort": 10255,
"cgroupDriver": "systemd",
"hairpinMode": "promiscuous-bridge",
"serializeImagePulls": false,
"clusterDomain": "cluster.local.",
"clusterDNS": ["10.96.0.2"]
}
EOF
1.2.3 创建kubelet配置文件
cat > kubelet.service << "EOF"
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
--cert-dir=/etc/kubernetes/ssl \
--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
--config=/etc/kubernetes/kubelet.json \
--network-plugin=cni \
--rotate-certificates \
--pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.2 \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF
1.2.4 同步文件到集群节点
cp kubelet-bootstrap.kubeconfig /etc/kubernetes/
cp kubelet.json /etc/kubernetes/
cp kubelet.service /usr/lib/systemd/system/
for i in k8s-master2 k8s-master3 k8s-worker1;do scp kubelet-bootstrap.kubeconfig kubelet.json $i:/etc/kubernetes/;done
for i in k8s-master2 k8s-master3 k8s-worker1;do scp ca.pem $i:/etc/kubernetes/ssl/;done
for i in k8s-master2 k8s-master3 k8s-worker1;do scp kubelet.service $i:/usr/lib/systemd/system/;done
说明：
kubelet.json中address需要修改为当前主机IP地址。
vim /etc/kubernetes/kubelet.json
1.2.5 创建目录及启动服务
在所有worker节点执行
mkdir -p /var/lib/kubelet
mkdir -p /var/log/kubernetes
systemctl daemon-reload
systemctl enable --now kubelet
systemctl status kubelet
# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master1 NotReady <none> 12s v1.21.10
k8s-master2 NotReady <none> 19s v1.21.10
k8s-master3 NotReady <none> 19s v1.21.10
k8s-worker1 NotReady <none> 18s v1.21.10
NotReady是因为网络还没有启动
# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR CONDITION
csr-b949p 7m55s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Approved,Issued
csr-c9hs4 3m34s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Approved,Issued
csr-r8vhp 5m50s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Approved,Issued
csr-zb4sr 3m40s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Approved,Issued
说明：
确认kubelet服务启动成功后，接着到master上Approve一下bootstrap请求。
1.3 部署kube-proxy
1.3.1 创建kube-proxy证书请求文件
[root@k8s-master1 k8s-work]# cat > kube-proxy-csr.json << "EOF"
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "kubemsb",
"OU": "CN"
}
]
}
EOF
1.3.2 生成证书
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
# ls kube-proxy*
kube-proxy.csr kube-proxy-csr.json kube-proxy-key.pem kube-proxy.pem
1.3.3 创建kubeconfig文件
#设置管理集群
kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube-proxy.kubeconfig
#设置证书
kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
#设置上下文
kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
#使用上下文
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
1.3.4 创建服务配置文件
cat > kube-proxy.yaml << "EOF"
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 192.168.10.103 #本机地址
clientConnection:
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR: 10.244.0.0/103 #pod网络，不用改
healthzBindAddress: 192.168.10.103:10256 #本机地址
kind: KubeProxyConfiguration
metricsBindAddress: 192.168.10.103:10249 #本机地址
mode: "ipvs" #ipvs比iptables更适用于大型集群
EOF
1.3.5 创建服务启动管理文件
cat > kube-proxy.service << "EOF"
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
--config=/etc/kubernetes/kube-proxy.yaml \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
1.3.6 同步文件到集群工作节点主机
cp kube-proxy*.pem /etc/kubernetes/ssl/
cp kube-proxy.kubeconfig kube-proxy.yaml /etc/kubernetes/
cp kube-proxy.service /usr/lib/systemd/system/
for i in k8s-master2 k8s-master3 k8s-worker1;do scp kube-proxy.kubeconfig kube-proxy.yaml $i:/etc/kubernetes/;done
for i in k8s-master2 k8s-master3 k8s-worker1;do scp kube-proxy.service $i:/usr/lib/systemd/system/;done
说明：
修改kube-proxy.yaml中IP地址为当前主机IP.
vim /etc/kubernetes/kube-proxy.yaml
1.3.7 服务启动
#创建WorkingDirectory
mkdir -p /var/lib/kube-proxy
systemctl daemon-reload
systemctl enable --now kube-proxy
systemctl status kube-proxy
2. 网络组件部署 Calico
2.1 下载
wget https://docs.projectcalico.org/v3.19/manifests/calico.yaml
2.2 修改文件
vim calico.yaml
#修改如下两行，取消注释
3683 - name: CALICO_IPV4POOL_CIDR
3684 value: "10.244.0.0/16" #pod网络
2.3 应用文件
kubectl apply -f calico.yaml
2.4 验证应用结果
[root@k8s-master1 k8s-work]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-7cc8dd57d9-dcwjv 0/1 ContainerCreating 0 94s
calico-node-2pmqz 0/1 Init:0/3 0 94s
calico-node-9ms2r 0/1 Init:0/3 0 94s
calico-node-tj5rt 0/1 Init:0/3 0 94s
calico-node-wnjcv 0/1 PodInitializing 0 94s
[root@k8s-master1 k8s-work]# kubectl get pods -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
calico-kube-controllers-7cc8dd57d9-dcwjv 0/1 ContainerCreating 0 2m29s <none> k8s-master2 <none> <none>
calico-node-2pmqz 0/1 Init:0/3 0 2m29s 192.168.10.103 k8s-master1 <none> <none>
calico-node-9ms2r 0/1 Init:ImagePullBackOff 0 2m29s 192.168.10.105 k8s-master3 <none> <none>
calico-node-tj5rt 0/1 Init:0/3 0 2m29s 192.168.10.106 k8s-worker1 <none> <none>
calico-node-wnjcv 0/1 PodInitializing 0 2m29s 192.168.10.104 k8s-master2 <none> <none>
[root@k8s-master1 k8s-work]#
长时间STATUS没有发生变化，可以通过以下命令查看详细信息
kubectl describe pod calico-node-gndtg -n kube-system
如果有pod一直处于Init:ImagePullBackOff，等待很长时间还是没有Runing 可以尝试下载镜像包通过ftp上传到服务器上。
https://github.com/projectcalico/calico/releases?page=3找到需要的版本下载，上传images目录下对应的镜像到服务器
docker load -i calico-pod2daemon-flexvol.tar
docker load -i calico-kube-controllers.tar
docker load -i calico-cni.tar
docker load -i calico-node.tar
docker images
我这里有四台工作节点，其中一台执行命令后正常下载运行Runing，另外三台等了很久一直处于pull状态，最后采用了以上方法解决，总结下来还是网络问题。
如果一直处于Pending，检查一下看看node是否被打污点了
kubectl describe node k8s-master2 |grep Taint
#删除污点
kubectl taint nodes k8s-master2 key:NoSchedule-
污点值有三个，如下：
NoSchedule：一定不被调度
PreferNoSchedule：尽量不被调度【也有被调度的几率】
NoExecute：不会调度，并且还会驱逐Node已有Pod
最后终于Ready
# kubectl get pods -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system calico-kube-controllers-7cc8dd57d9-pd44j 1/1 Running 0 70m
kube-system calico-node-bpqfr 1/1 Running 0 70m
kube-system calico-node-f8c6t 1/1 Running 0 70m
kube-system calico-node-gndtg 1/1 Running 0 70m
kube-system calico-node-pptqm 1/1 Running 0 70m
# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master1 Ready <none> 5h v1.21.10
k8s-master2 Ready <none> 5h v1.21.10
k8s-master3 Ready <none> 5h v1.21.10
k8s-worker1 Ready <none> 5h v1.21.10
3. 部署CoreDNS
用于实现k8s内服务间名称解析，例如k8s之间部署了两个服务 想通过名称进行访问，或者是k8s集群内的服务想访问互联网中的一些服务。
在k8s-master1上/data/k8s-work/下执行：
cat > coredns.yaml << "EOF"
apiVersion: v1
kind: ServiceAccount
metadata:
name: coredns
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
rules:
- apiGroups:
- ""
resources:
- endpoints
- services
- pods
- namespaces
verbs:
- list
- watch
- apiGroups:
- discovery.k8s.io
resources:
- endpointslices
verbs:
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:coredns
subjects:
- kind: ServiceAccount
name: coredns
namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
name: coredns
namespace: kube-system
data:
Corefile: |
.:53 {
errors
health {
lameduck 5s
}
ready
kubernetes cluster.local in-addr.arpa ip6.arpa {
fallthrough in-addr.arpa ip6.arpa
}
prometheus :9153
forward . /etc/resolv.conf {
max_concurrent 1000
}
cache 30
loop
reload
loadbalance
}
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: coredns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/name: "CoreDNS"
spec:
# replicas: not specified here:
# 1. Default is 1.
# 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
strategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
selector:
matchLabels:
k8s-app: kube-dns
template:
metadata:
labels:
k8s-app: kube-dns
spec:
priorityClassName: system-cluster-critical
serviceAccountName: coredns
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
nodeSelector:
kubernetes.io/os: linux
affinity:
podAntiAffinity:
preferredDuringSchedulingIgnoredDuringExecution:
- weight: 100
podAffinityTerm:
labelSelector:
matchExpressions:
- key: k8s-app
operator: In
values: ["kube-dns"]
topologyKey: kubernetes.io/hostname
containers:
- name: coredns
image: coredns/coredns:1.8.4
imagePullPolicy: IfNotPresent
resources:
limits:
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
args: [ "-conf", "/etc/coredns/Corefile" ]
volumeMounts:
- name: config-volume
mountPath: /etc/coredns
readOnly: true
ports:
- containerPort: 53
name: dns
protocol: UDP
- containerPort: 53
name: dns-tcp
protocol: TCP
- containerPort: 9153
name: metrics
protocol: TCP
securityContext:
allowPrivilegeEscalation: false
capabilities:
add:
- NET_BIND_SERVICE
drop:
- all
readOnlyRootFilesystem: true
livenessProbe:
httpGet:
path: /health
port: 8080
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
readinessProbe:
httpGet:
path: /ready
port: 8181
scheme: HTTP
dnsPolicy: Default
volumes:
- name: config-volume
configMap:
name: coredns
items:
- key: Corefile
path: Corefile
---
apiVersion: v1
kind: Service
metadata:
name: kube-dns
namespace: kube-system
annotations:
prometheus.io/port: "9153"
prometheus.io/scrape: "true"
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
kubernetes.io/name: "CoreDNS"
spec:
selector:
k8s-app: kube-dns
clusterIP: 10.96.0.2 #需要和上边指定的clusterDNS IP一致
ports:
- name: dns
port: 53
protocol: UDP
- name: dns-tcp
port: 53
protocol: TCP
- name: metrics
port: 9153
protocol: TCP
EOF
kubectl apply -f coredns.yaml
# kubectl get pods -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system calico-kube-controllers-7cc8dd57d9-pd44j 1/1 Running 1 24h
kube-system calico-node-bpqfr 1/1 Running 1 24h
kube-system calico-node-f8c6t 1/1 Running 1 24h
kube-system calico-node-gndtg 1/1 Running 2 24h
kube-system calico-node-pptqm 1/1 Running 1 24h
kube-system coredns-675db8b7cc-xlwsp 1/1 Running 0 3m21s
#kubectl get pods -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
calico-kube-controllers-7cc8dd57d9-pd44j 1/1 Running 1 24h 10.244.224.2 k8s-master2 <none> <none>
calico-node-bpqfr 1/1 Running 1 24h 192.168.10.103 k8s-master1 <none> <none>
calico-node-f8c6t 1/1 Running 1 24h 192.168.10.104 k8s-master2 <none> <none>
calico-node-gndtg 1/1 Running 2 24h 192.168.10.106 k8s-worker1 <none> <none>
calico-node-pptqm 1/1 Running 1 24h 192.168.10.105 k8s-master3 <none> <none>
coredns-675db8b7cc-xlwsp 1/1 Running 0 3m47s 10.244.159.129 k8s-master1 <none> <none>
和Calico一样，如果一直处于ImagePullBackOff，查看后是因为拉去镜像的问题，可尝试将镜像本地下载后，上传到服务器load
镜像下载网站，去docker hub搜索要下载的镜像和版本，下载到本地后上传至服务器
docker load -i coredns-coredns-1.8.4-.tar
docker images
#标签不对应的话重新打标签
docker tag 镜像id coredns/coredns:v1.8.4
到这步我还是没有正常启动，提示如下信息
kubectl describe pod coredns-675db8b7cc-q6l95 -n kube-system
尝试删除pod后，重新创建CoreDNS Pod就正常了
# 查看日志
kubectl logs -f coredns-675db8b7cc-q6l95 -n kube-system
# 删除并重新创建CoreDNS Pod
kubectl delete pod coredns-675db8b7cc-q6l95 -n kube-system
kubectl apply -f coredns.yaml
4. 部署应用验证
在k8s-master1上创建pod
[root@k8s-master1 k8s-work]# cat > nginx.yaml << "EOF"
---
apiVersion: v1
kind: ReplicationController
metadata:
name: nginx-web
spec:
replicas: 2
selector:
name: nginx
template:
metadata:
labels:
name: nginx
spec:
containers:
- name: nginx
image: nginx:1.19.6
ports:
- containerPort: 80
---
apiVersion: v1
kind: Service #可以通过不同的方式对k8s集群服务进行访问
metadata:
name: nginx-service-nodeport
spec:
ports:
- port: 80
targetPort: 80
nodePort: 30001 #把k8s集群中运行应用的80端口映射到30001端口
protocol: TCP
type: NodePort
selector:
name: nginx
EOF
kubectl apply -f nginx.yaml
# kubectl get pods -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-web-qzvw4 1/1 Running 0 58s 10.244.194.65 k8s-worker1 <none> <none>
nginx-web-spw5t 1/1 Running 0 58s 10.244.224.1 k8s-master2 <none> <none>
# kubectl get all
NAME READY STATUS RESTARTS AGE
pod/nginx-web-jnbhx 1/1 Running 1 23h
NAME DESIRED CURRENT READY AGE
replicationcontroller/nginx-web 1 1 1 2d
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 3d6h
service/nginx-service-nodeport NodePort 10.96.72.89 <none> 80:30001/TCP 2d
查看是否有30001端口
ss -anput | grep ":30001"
可以看到每台worker节点都有文章来源：https://www.toymoban.com/news/detail-623716.html
访问：http://192.168.10.103:30001，http://192.168.10.104:30001，http://192.168.10.105:30001，http://192.168.10.106:30001文章来源地址https://www.toymoban.com/news/detail-623716.html
#查看组件状态
kubectl get cs
#查看pod
kubectl get pods
到了这里，关于Kubernetes高可用集群二进制部署（五）kubelet、kube-proxy、Calico、CoreDNS的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！
