可测含多进程的app-- python调用adb命令获取Android App应用的性能数据：CPU、GPU、内存、电池、耗电量（含python源码）

可测含多进程的app–Python–通过adb命令获取Android App应用的性能数据：CPU、GPU、内存、电池、耗电量，并与Perfdog取值对比结果

1、原理

python脚本通过os.popen()方法运行adb命令，获取性能数据，将性能数据保存在csv文件并算出均值、最大值、最小值。
本脚本可测试一个app包含多个进程的场景，可以获取每个进程的性能数据。

2、环境准备：

2.1 软件环境

具备python环境，Android环境
需要python库：os, csv, time, datetime, sys,time,pandas

2.2 手机状态

1、Wi-Fi模式连接手机
2、统一手机环境变量：手机满电，将手机降至常温（每个测试场景取接近的初始温度），屏幕亮度和音量调为50%
3、杀掉其他进程
4、手机温度：脚本获取到的是电池温度（Perfdog也是如此）。温枪测温：可将温枪调整为测物体模式测温，每次选取相同测试温点，测温点可选摄像头附近，不要直对摄像头。温枪测的和电池温度相近。
（手机降温：可以使用冰块、小风扇，或者将手机放入冰箱降温）

3、获取性能指标

统一说明：以下adb命令在Mac电脑上使用的是‘grep’，在windows电脑执行时改为‘findstr’

3.1 同时会用到的其他adb命令

# Wi-Fi模式连接手机，手机与电脑连接同一个Wi-Fi，查看手机IP地址，执行命令：
adb connect 192.168.88.152
# 如果连接失败，可以执行如下命令重启端口5555，再重新连接
adb tcpip 5555

# 获取app应用名
adb shell dumpsys window | grep mCurrentFocus
# 获取进程ID
adb shell ps | grep im.zego.zegoland

# 取出 文件指定行数 区间内容
os.popen("sed -n '{},{}p' {} > {}".format(sed_count['start_count'], sed_count['end_count'], original_path,result_path)）

3.2 性能指标相关汇总表

关于Android 系统内存耗用：VSS/RSS/PSS/USS 的介绍，可参考：
VSS/RSS/PSS/USS 的介绍【声网】

4、源码

4.1 获取AppCPU使用率，GPU使用率、内存Pss、电池百分比、电池温度、耗电量源码

使用时，根据自己测试信息修改"if main"中的appName、deviceName、性能数据文件名PerfDataFile、收集性能时间runTime（单位秒，可修改为分钟、小时），被测进程（可多个）

#! /usr/bin/env python3
# _*_ coding:utf-8 _*_
"""
@Auth : Dora
@ Time： 2023.5.27
调整为不依赖外部方法的脚本
"""
import os, csv, time, datetime, sys
from time import sleep

import pandas as pd

class Logger(object):
    def __init__(self, filename='default.log', stream=sys.stdout):
        self.terminal = stream
        self.log = open(filename, 'a+')

    def write(self, message):
        self.terminal.write(message)
        self.log.write(message)

    def flush(self):
        pass


# 将控制台输出到日志文件中，日志是追加模式，记得定时清理
# 便于检验数据获取是否正确。也可将这部分删除
sys.stdout = Logger('../log/stout_log.log', sys.stdout)
sys.stderr = Logger('../log/stout.log_file', sys.stderr)


# 可用
class PertestInfo:
    def __init__(self, appName, deviceName, PerfDataFile, runTime, *progress):
        self.PerfDataFile = PerfDataFile
        # 分割线，便于定位日志
        print("{:*^50s}".format("Split Line"))
        print("{:+^50s}".format(self.PerfDataFile))

        self.appName = appName  # 要测试的app
        self.progress = progress  # 要测试的进程，一个应用可能有多个进程
        print("self.progress:", self.progress, type(self.progress))
        self.deviceName = deviceName  # 设备名称
        self.current_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        # 运行时间
        self.run_time = datetime.timedelta(seconds=runTime)  # 收集性能数据时长，时间单位可修改为：hours,minutes,seconds

    def clear_getsize(self, file_path):
        # 可以写成一个装饰器，待优化
        with open(file_path,'w'):
            pass
        start_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        os.popen('adb -s {} shell top -n 1 > {}'.format(deviceName, file_path))
        while not os.path.getsize(file_path):
            # os.path.getsize() 返回文件的字节数，如果为 0，则代表空
            # 判断执行top命令返回的数据是否存入文件，若文件为0，继续sleep(1)
            sleep(1)
        end_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('运行top命令开始时间：', start_time)
        print('运行top命令数据保存到文件的结束时间：', end_time)

    def get_PID(self):
        # 获取pid
        appPID = {}
        # result = os.popen('adb -s {} shell ps | grep {}'.format(self.deviceName, appName))
        for app in self.progress:
            # print('app:', app)
            result = os.popen('adb -s {} shell ps | grep {}'.format(self.deviceName, app))
            # print("pid result:", result)
            for line in result.readlines():
                print('line:', line, type(line))
                line = '#'.join(line.split()) + '#'
                # print('line#:', line)
                appstr = app + '#'
                if appstr in line:
                    print('line#:', line)
                    pid = line.split('#')[1]
                    # print("pid:", pid)
                    appPID[app] = pid
        print('appPID:', appPID)
        sleep(1)
        return appPID

    def sed_result(self, original_path, keyword, result_path):
        # 获取开始、结束行数
        start_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('获取start_index开始时间：', start_time)
        sed_index = {'start_index': 0, 'end_index': 0}
        while sed_index['start_index'] == 0:
            sleep(1)
            for index, line in enumerate(open(original_path, 'r')):
                if keyword in line:
                    sed_index['start_index'] = index
                    print("start_index:", sed_index['start_index'])
                    break
        end_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('获取start_index结束时间：', end_time)
        with open(original_path, 'r') as f:
            result = f.readlines()[sed_index['start_index']:]
            index = sed_index['start_index']
            for line in result:
                index = index + 1
                if line in ['\n', '\r\n']:
                    sed_index['end_index'] = index
                    print("end_index:", sed_index['end_index'])
                    break

        # 从开始、结束行数截取内容
        os.popen("sed -n '{},{}p' {} > {}".format(sed_index['start_index'], sed_index['end_index'], original_path,
                                                  result_path))
        # 案例：取出 / etc / passwd的第2行到第5行
        # sed - n '2,5p' / etc / passwd
        #  result = os.popen('sed -n {}p {}'.format(500, filename)).read()

    def get_batteryPercent_temperature(self):
        # 获取电量半分比和电池温度
        result = os.popen("adb -s {} shell dumpsys battery".format(self.deviceName))  # .read()
        # print(result)
        battery_percent = {'battery_percent': '', 'temperature': ''}
        for line in result:
            # print("line:{}-----", line)
            if "level" in line:
                battery_percent['battery_percent'] = int(line.split(":")[1])
                # print("battery_percent:{},type(battery_percent):{}".format(battery_percent, type(battery_percent)))

            if "temperature" in line:
                battery_percent['temperature'] = int(line.split(":")[1]) / 10
                # print("battery_percent:{},type(battery_percent):{}".format(battery_percent, type(battery_percent)))
        print("battery_percent:", battery_percent)
        return battery_percent

    def reset_battery(self):
        # 执行业务场景前，清空耗电数据，并重置设备耗电数据
        os.popen("adb -s {} shell dumpsys batterystats --enable full-wake-history".format(self.deviceName))  # 清空已有的耗电数据
        sleep(2)
        os.popen("adb -s {} shell dumpsys batterystats --reset".format(self.deviceName))  # 重置设备耗电数据

    def get_battery(self):
        # 获取耗电量，单位：mAh
        # 一定要WiFi模式连接手机
        battery = {'battery_sum': '', 'battery_screen': '', 'battery_cpu': '', 'battery_camera': '', 'battery_wifi': '',
                   'battery_system_services': '', 'battery_sensors': '', 'battery_audio': ''}
        # 获取进程ID:uid
        cmd1 = "adb -s {} shell ps | grep {}".format(self.deviceName, self.appName)
        uid_data = os.popen(cmd1).read()
        uid_original = uid_data.split()[0]
        uid = uid_original.replace('_', '')
        print('uid:', uid)

        original_path = '../log/original_data.txt'
        result_path = '../log/sed_result.txt'
        # 先清空之前的内容
        with open(original_path,'w'):
            pass
        with open(result_path,'w'):
            pass
        start_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        str1 = '  Estimated power use (mAh):'
        cmd2 = 'adb -s {} shell dumpsys batterystats > {}'.format(self.deviceName, original_path)
        os.popen(cmd2)
        while not os.path.getsize(original_path):
            # os.path.getsize() 返回文件的字节数，如果为 0，则代表空
            # 耗电量数据存储需要时间，判断执行top命令返回的数据是否存入文件
            sleep(1)
        end_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('运行获取耗电量开始时间：', start_time)
        print('运行耗电量数据保存到文件的结束时间：', end_time)
        self.sed_result(original_path=original_path, keyword=str1, result_path=result_path)
        while not os.path.getsize(result_path):
            sleep(1)
        with open(result_path, 'r') as f:
            for line in f.readlines():
                if uid in line:
                    print('battery_line:', line)
                    line = '#'.join(line.split())
                    battery['battery_sum'] = line.split('#')[2]
                    if 'screen=' in line:
                        battery['battery_screen'] = line.split('screen=')[1].split('#')[0]
                    if 'cpu=' in line:
                        battery['battery_cpu'] = line.split('cpu=')[1].split('#')[0]
                    if 'camera=' in line:
                        battery['battery_camera'] = line.split('camera=')[1].split('#')[0]
                    if 'wifi=' in line:
                        battery['battery_wifi'] = line.split('wifi=')[1].split('#')[0]
                    if 'system_services=' in line:
                        battery['battery_system_services'] = line.split('system_services=')[1].split('#')[0]
                    if 'sensors=' in line:
                        battery['battery_sensors'] = line.split('sensors=')[1].split('#')[0]
                    if 'audio=' in line:
                        battery['battery_audio'] = line.split('audio=')[1].split('#')[0]
        print('battery:\n', battery)
        return battery

    def get_cpuinfo(self):
        # 获取PID
        appPID = self.get_PID()
        # print("appPID:", appPID)
        appCPU = {}
        file_path = '../log/cpuinfo.txt'
        # 先清空之前的内容
        with open(file_path,'w'):
            pass
        start_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        os.popen('adb -s {} shell top -n 1 > {}'.format(deviceName, file_path))
        while not os.path.getsize(file_path):
            # os.path.getsize() 返回文件的字节数，如果为 0，则代表空
            # 判断执行top命令返回的数据是否存入文件
            sleep(1)
        end_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('运行top命令开始时间：', start_time)
        print('运行top命令数据保存到文件的结束时间：', end_time)

        with open(file_path, 'r') as f:
            for line in f.readlines():
                for app in self.progress:
                    if app in appPID.keys():
                        if appPID[app] in line:
                            # print('app:', app)
                            # print('appPID line:', line)
                            # appCPU['time'] = int(time.time())  # 当前时间）
                            cpu = round(float(line.split()[-4]) / 8, 2)
                            appCPU[app] = cpu
        print("appCPU:", appCPU)
        return appCPU

    def get_GUsage(self):
        # 获取GPU使用率，与PerfDog误差在0.001以内
        result1 = os.popen(
            'adb -s {} shell "cat /sys/class/kgsl/kgsl-3d0/gpubusy"'.format(deviceName)).read()  # 获取GPU占用率,一加8T
        # print("result:", result1)

        result2 = os.popen('adb -s {} shell su -c "cat /sys/class/kgsl/kgsl-3d0/gpubusy"'.format(
            deviceName)).read()  # 获取GPU占用率，红米note7
        # print("result:", result2)

        GUsage = 0
        if result1:
            data1 = result1.split()
            GUsage = round(int(data1[0]) / int(data1[1]) * 100, 3)  # round(i,j)给i取j位小数，X100，转化为百分比
            print('GUsage1:', GUsage)
        elif result2:
            data2 = result2.split()
            GUsage = round(int(data2[0]) / int(data2[1]) * 100, 3)  # round(i,j)给i取j位小数，X100，转化为百分比
            print('GUsage2:', GUsage)
        else:
            print("GUsage获取失败，可能获取GPU命令不适用于被测机型")
        return GUsage

    def get_memory_Pss(self):
        # 获取pid
        appPID = self.get_PID()
        # 获取内存数据
        original_path = '../log/original_data.txt'
        result_path = '../log/sed_result.txt'
        # 先清空之前的内容
        with open(original_path,'w'):
            pass
        with open(result_path,'w'):
            pass
        start_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())

        str1 = 'Total PSS by process:'
        cmd2 = 'adb -s {} shell dumpsys meminfo > {}'.format(self.deviceName, original_path)
        print('cmd2:', cmd2)
        os.popen(cmd2)
        while not os.path.getsize(original_path):
            # os.path.getsize() 返回文件的字节数，如果为 0，则代表空
            # 判断执行top命令返回的数据是否存入文件
            sleep(1)
        end_time = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
        print('运行获取内存开始时间：', start_time)
        print('运行内存数据保存到文件的结束时间：', end_time)
        self.sed_result(original_path=original_path, keyword=str1, result_path=result_path)
        while not os.path.getsize(result_path):
            sleep(1)
        # appPSS = {'im.zego.zegoland:zegoland_avatar': 0, 'im.zego.zegoland:zegoland_unity': 0,'im.zego.zegoland:zegoland': 0}
        appPss = {}
        with open(result_path, 'r') as f:
            for line in f.readlines():
                for app in self.progress:
                    if app in appPID.keys():
                        if appPID[app] in line:
                            # print('app:', app)
                            print('app_mem_line:', line, app, appPID[app])
                            Pss = round((int(line.strip().split('K: ')[0].replace(',', ''))) / 1024, 2)
                            # print("Pss:", Pss)
                            appPss[app] = Pss
        print("appPss", appPss)
        return appPss

    def analyse_dumpsys_Csv(self, fileName):
        # 对性能数据文件进行计算，获取均值、最大值、最小值
        analyse_data = []
        info = pd.read_csv(fileName, encoding='gbk')
        rowsName = info.columns  # 列名
        print('列名：', rowsName)
        lines = info.shape[0]  # 行数
        rows = info.shape[1]  # 列数
        print("行:{},type{}，列：{}".format(lines, type(lines), rows))
        # result = {}
        avg_data = ['', '', '', 'avg']  # 存放均值
        max_data = ['', '', '', 'max']  # 存放最大值
        min_data = ['', '', '', 'min']  # 存放最小值
        for row_name in rowsName:
            if row_name not in ['id', 'hour', 'minute', 'second']:
                avg_value = round(info[row_name].mean(), 2)
                max_value = info[row_name].max()
                min_value = info[row_name].min()
                avg_data.append(avg_value)
                max_data.append(max_value)
                min_data.append(min_value)
        # 将均值、最大值、最小值存入analyse_data以便输入csv文件
        analyse_data.append(avg_data)
        analyse_data.append(max_data)
        analyse_data.append(min_data)
        print('analyse_data:', analyse_data)
        # 在数据表中插入平均值、最大值、最小值
        with open(fileName, 'a+', newline='') as file:
            # a+ 追加方式写+读
            writer = csv.writer(file)
            writer.writerows(analyse_data)
            sleep(1)
            file.close()

    def perf_run(self):
        # 执行获取数据函数
        GPU_battery_data = [
            ['id', 'hour', 'minute', 'second', 'GUsage[%]', 'battery_percent[%]', 'temperature', 'battery_sum[mAh]',
             'battery_screen[mAh]', 'battery_cpu[mAh]', 'battery_camera[mAh]', 'battery_wifi[mAh]',
             'battery_system_services[mAh]', 'battery_sensors[mAh]', 'battery_audio[mAh]']]
        print('GPU_battery_data:', GPU_battery_data)
        print("now:", datetime.datetime.now())
        print('run_time:', self.run_time)
        self.reset_battery()  # 清空耗电数据，并重置耗电数据
        sleep(1)
        id = 1  # id：可以运行的次数
        end_time = datetime.datetime.now() + self.run_time
        mem_Pss_data = []
        cpu_data = []
        while end_time > datetime.datetime.now():
            # 在指定时间内运行
            battery_percent = self.get_batteryPercent_temperature()  # 获取电量百分数和电池温度
            print('battery_percent:', battery_percent)
            # sleep(1)
            GUsage = self.get_GUsage()  # 获取GPU占用率
            # sleep(1)
            GPU_battery_data.append((
                str(id), str(datetime.datetime.now().hour), str(datetime.datetime.now().minute),
                str(datetime.datetime.now().second), str(GUsage),
                battery_percent['battery_percent'], battery_percent['temperature'], '', '', '', '', ''))
            cpu_info = self.get_cpuinfo()  # 获取cpu
            cpu_info['id'] = id
            cpu_info['hour'] = datetime.datetime.now().hour
            cpu_info['minute'] = datetime.datetime.now().minute
            cpu_info['second'] = datetime.datetime.now().second

            # cpu_info['time'] = str(datetime.datetime.now().hour)+':'+str(datetime.datetime.now().minute)+':'+str(datetime.datetime.now().second)
            cpu_data.append(cpu_info)
            # sleep(1)
            mem_Pss = self.get_memory_Pss()  # 获取内存
            mem_Pss['id'] = id
            mem_Pss['hour'] = datetime.datetime.now().hour
            mem_Pss['minute'] = datetime.datetime.now().minute
            mem_Pss['second'] = datetime.datetime.now().second
            mem_Pss_data.append(mem_Pss)
            # print("多组Pss数据：", mem_Pss_data)
            id = id + 1
            sleep(1)
        # 最后一组数据展示耗电量 mAh
        battery_percent = self.get_batteryPercent_temperature()  # 获取电量和电池温度
        # sleep(1)
        cpu_info = self.get_cpuinfo()  # 获取cpu
        print('cpu_info:', cpu_info)
        cpu_info['id'] = id

        cpu_info['hour'] = datetime.datetime.now().hour
        cpu_info['minute'] = datetime.datetime.now().minute
        cpu_info['second'] = datetime.datetime.now().second

        cpu_data.append(cpu_info)
        # sleep(1)
        GUsage = self.get_GUsage()  # 获取GPU占用率
        # sleep(1)
        mem_Pss = self.get_memory_Pss()  # 获取内存
        id = id + 1
        mem_Pss['id'] = id
        mem_Pss['hour'] = datetime.datetime.now().hour
        mem_Pss['minute'] = datetime.datetime.now().minute
        mem_Pss['second'] = datetime.datetime.now().second
        # print("一组Pss数据：", mem_Pss)
        mem_Pss_data.append(mem_Pss)
        # print("多组Pss数据：", mem_Pss_data)
        # sleep(1)
        battery = self.get_battery()  # 耗电量数据，单位：mAh
        print("")
        GPU_battery_data.append((
            str(id), str(datetime.datetime.now().hour), str(datetime.datetime.now().minute),
            str(datetime.datetime.now().second), str(GUsage),
            battery_percent['battery_percent'], battery_percent['temperature'], battery['battery_sum'],
            battery['battery_screen'], battery['battery_cpu'], battery['battery_camera'], battery['battery_wifi'],
            battery['battery_system_services'], battery['battery_sensors'], battery['battery_audio']))
        print("收集性能数据结束时间:", datetime.datetime.now())
        sleep(1)
        print("保存数据")
        # 保存数据GPU和battery数据
        with open('../data/batatery_GPU-%s' % self.PerfDataFile, 'w', newline='') as file:
            writer = csv.writer(file, quoting=csv.QUOTE_ALL)
            writer.writerows(GPU_battery_data)
            sleep(10)
            file.flush()
            sleep(2)
            file.close()
        print("分析数据")

        # 分析数据
        # self.analyse_perf_Csv('../data/batatery_GPU-%s' % self.PerfDataFile)
        # 分析GPU和battery数据
        self.analyse_dumpsys_Csv('../data/batatery_GPU-%s' % self.PerfDataFile)
        # 保存内存数据
        fieldName = []
        for app in self.progress:
            # print('app:', app)
            fieldName.append(app)
        els = ['id', 'hour', 'minute', 'second']
        fieldName = els + fieldName
        print('filedName:', fieldName)
        with open('../data/mem_Pss-%s' % self.PerfDataFile, 'w', newline='') as csvfile:
            writer = csv.DictWriter(csvfile, fieldnames=fieldName)
            writer.writeheader()
            for row in mem_Pss_data:
                writer.writerow(row)
        self.analyse_dumpsys_Csv('../data/mem_Pss-%s' % self.PerfDataFile)

        # 保存cpu数据
        """
        cpu_fieldName = []
        for app in self.progress:
            # print('app:', app)
            cpu_fieldName.append(app)
        cpu_els = ['id', 'time']
        cpu_fieldName = cpu_els + cpu_fieldName
        """
        with open('../data/AppCPU-%s' % self.PerfDataFile, 'w', newline='') as csvfile:
            writer = csv.DictWriter(csvfile, fieldnames=fieldName)
            writer.writeheader()
            for row in cpu_data:
                writer.writerow(row)
        self.analyse_dumpsys_Csv('../data/AppCPU-%s' % self.PerfDataFile, )


if __name__ == '__main__':
    # 一定要Wi-Fi模式连接手机
    # deviceName = '192.168.89.48:5555'
    # deviceName = '192.168.1.105:5555'
    # deviceName = '192.168.88.152:5555'  # 一加8T
    # deviceName = '192.168.88.145:5555'  # 华为P50
    deviceName = '192.168.88.210:5555'  # oppo reno6
    # deviceName = '192.168.1.106:5555'
    # deviceName = '192.168.88.192:5555'  # 小米11青春版
    # deviceName = '192.168.88.198:5555'  # 红米note7
    # deviceName = '192.168.88.199:5555'  # oppo reno3 pro
    appName = 'im.zego.zegoland'   # ZegoLand
    # appName = 'com.zego.goavatar'  # avatar
    # 运行时常
    runTime = 60
    PerfDataFile = "OPPOreno6-语聊房-{}.csv".format(
        str(time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())))
    # 应用包含多个进程时，存放于*progress
    # ZL
    phone = PertestInfo(appName, deviceName, PerfDataFile, runTime, 'im.zego.zegoland:zegoland_avatar',
                        'im.zego.zegoland:zegoland_unity',
                        'im.zego.zegoland')
    # phone = PertestInfo(appName, deviceName, PerfDataFile, runTime,'com.zego.goavatar')
    # appPID = phone.get_PID()
    # phone.get_battery()
    # phone.get_GUsage()
    # phone.get_cpuinfo()
    # phone.get_memory_Pss()
    phone.perf_run()

5、测试数据示例

测试数据输入到csv文件，并算出平均值、最大值、最小值。示例截图如下：

6、使用场景：

1、手动将app设置到测试场景，运行性能测试脚本perftestino.py，收集性能数据；
2、使用多线程，在执行monkey测试的同时收集性能数据和log cat日志，同时检测crash，导出crash日志；
3、使用多线程，在执行UI自动化测试场景的同时收集性能数据
4、手工测试功能时，运行性能测试脚本，捕捉可能存在的内存泄露等问题文章来源地址https://www.toymoban.com/news/detail-638843.html

到了这里，关于可测含多进程的app-- python调用adb命令获取Android App应用的性能数据：CPU、GPU、内存、电池、耗电量（含python源码）的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！