前文链接：QGraphicsView实现简易地图3『局部加载-地图缩放』
当鼠标拖动地图移动时，需要实时增补和删减瓦片地图，大致思路是计算地图从各方向移动时进出视口的瓦片坐标值，根据变化后的瓦片坐标值来增减地图瓦片，以下将提供实现此需求的核心代码。
1、动态演示效果文章来源：https://www.toymoban.com/news/detail-642659.html
2、静态展示图片
核心代码文章来源地址https://www.toymoban.com/news/detail-642659.html
void MapView::moveScene()
{
QString appPath = QApplication::applicationDirPath();
QString dirPath = QString("%1/MapData/GaoDeMap/Map/MapPng/L0%2").arg(appPath).arg(m_curLevel + 1);
// 视口宽度和高度
int vw = viewport()->width();
int vh = viewport()->height();
// 计算呈现的瓦片地图左上角的场景坐标和视口坐标、呈现的瓦片地图右下角的场景坐标和视口坐标
QPoint topLeftScenePos(m_topLeftTileCoord.x * PIXMAP_SIZE, m_topLeftTileCoord.y * PIXMAP_SIZE);
QPointF topLeftViewPos = mapFromScene(topLeftScenePos);
QPoint bottomRightScenePos(m_bottomRightTileCoord.x * PIXMAP_SIZE, m_bottomRightTileCoord.y * PIXMAP_SIZE);
QPointF bottomRightViewPos = mapFromScene(bottomRightScenePos);
int mapSideCount = pow(2, m_curLevel);
if (MapUtility::sceneSize(m_curLevel) > vw)
{
// 1、水平瓦片坐标控制：判断最左侧瓦片是否完全进入视口、最右侧瓦片是否完全离开视口
if (topLeftViewPos.x() > 0)
{
int count = qCeil(topLeftViewPos.x() / PIXMAP_SIZE); // 左侧进入视口瓦片数量
int oldLeftTileCoordX = m_topLeftTileCoord.x; // 保存原左侧瓦片坐标X
m_topLeftTileCoord.x -= count; // 更新现左侧瓦片坐标X
if (m_topLeftTileCoord.x < 0)
m_topLeftTileCoord.x = 0;
// 增加从左侧进入视口的图片
for (int row = m_topLeftTileCoord.y; row <= m_bottomRightTileCoord.y; ++row)
{
for (int col = m_topLeftTileCoord.x; col < oldLeftTileCoordX; ++col)
{
QString fileName = QString("%1/Map_%2-%3.png").arg(dirPath)
.arg(QString::number(row + 1).rightJustified(2, '0')).arg(QString::number(col + 1).rightJustified(2, '0'));
QPixmap pixmap(fileName);
QGraphicsPixmapItem *item = new QGraphicsPixmapItem(pixmap);
item->setPos(PIXMAP_SIZE * col, PIXMAP_SIZE * row);
m_scene->addItem(item);
m_mapItems[row][col] = item;
}
}
}
if (bottomRightViewPos.x() > vw)
{
int count = qFloor((bottomRightViewPos.x() - vw) / PIXMAP_SIZE) + 1; // 右侧离开视口瓦片数量
int oldRightTileCoordX = m_bottomRightTileCoord.x; // 保存原右侧瓦片坐标X
m_bottomRightTileCoord.x -= count; // 更新现右侧瓦片坐标X
if (m_bottomRightTileCoord.x < 0)
m_bottomRightTileCoord.x = 0;
// 删除从右侧离开视口的图片
for (int row = m_topLeftTileCoord.y; row <= m_bottomRightTileCoord.y; ++row)
{
for (int col = oldRightTileCoordX; col > m_bottomRightTileCoord.x; --col)
{
QGraphicsPixmapItem *item = m_mapItems[row][col];
m_scene->removeItem(item);
m_mapItems[row].remove(col);
delete item;
}
}
}
// 2、水平瓦片坐标控制：判断最右侧瓦片是否完全进入视口、最左侧瓦片是否完全离开视口
if (bottomRightViewPos.x() + 255 < vw)
{
int count = qCeil((vw - (bottomRightViewPos.x() + 255)) / PIXMAP_SIZE); // 右侧进入视口瓦片数量
int oldRightTileCoordX = m_bottomRightTileCoord.x; // 保存原右侧瓦片坐标X
m_bottomRightTileCoord.x += count; // 保存现右侧瓦片坐标X
if (m_bottomRightTileCoord.x >= mapSideCount)
m_bottomRightTileCoord.x = mapSideCount - 1;
// 增加从右侧进入视口的图片
for (int row = m_topLeftTileCoord.y; row <= m_bottomRightTileCoord.y; ++row)
{
for (int col = m_bottomRightTileCoord.x; col > oldRightTileCoordX; --col)
{
QString fileName = QString("%1/Map_%2-%3.png").arg(dirPath)
.arg(QString::number(row + 1).rightJustified(2, '0')).arg(QString::number(col + 1).rightJustified(2, '0'));
QPixmap pixmap(fileName);
QGraphicsPixmapItem *item = new QGraphicsPixmapItem(pixmap);
item->setPos(PIXMAP_SIZE * col, PIXMAP_SIZE * row);
m_scene->addItem(item);
m_mapItems[row][col] = item;
}
}
}
if (topLeftViewPos.x() + 255 < 0)
{
int count = qFloor(fabs(topLeftViewPos.x()) / PIXMAP_SIZE); // 左侧离开视口瓦片数量
int oldLeftTileCoordX = m_topLeftTileCoord.x; // 保存原左侧瓦片坐标X
m_topLeftTileCoord.x += count; // 保存现左侧瓦片坐标X
if (m_topLeftTileCoord.x >= mapSideCount)
m_topLeftTileCoord.x = mapSideCount - 1;
// 删除从左侧离开视口的图片
for (int row = m_topLeftTileCoord.y; row <= m_bottomRightTileCoord.y; ++row)
{
for (int col = oldLeftTileCoordX; col < m_topLeftTileCoord.x; ++col)
{
QGraphicsPixmapItem *item = m_mapItems[row][col];
m_scene->removeItem(item);
m_mapItems[row].remove(col);
delete item;
}
}
}
}
if (MapUtility::sceneSize(m_curLevel) > vh)
{
// 3、垂直瓦片坐标控制：判断最上侧瓦片是否完全进入视口，最下侧瓦片是否完全离开视口
if (topLeftViewPos.y() > 0)
{
int count = qCeil(topLeftViewPos.y() / PIXMAP_SIZE); // 上侧进入视口瓦片数量
int oldTopTileCoordY = m_topLeftTileCoord.y; // 保存原上侧瓦片坐标Y
m_topLeftTileCoord.y -= count; // 保存现上侧瓦片坐标Y
if (m_topLeftTileCoord.y < 0)
m_topLeftTileCoord.y = 0;
// 增加从上侧进入视口的图片
for (int row = m_topLeftTileCoord.y; row < oldTopTileCoordY; ++row)
{
for (int col = m_topLeftTileCoord.x; col <= m_bottomRightTileCoord.x; ++col)
{
QString fileName = QString("%1/Map_%2-%3.png").arg(dirPath)
.arg(QString::number(row + 1).rightJustified(2, '0')).arg(QString::number(col + 1).rightJustified(2, '0'));
QPixmap pixmap(fileName);
QGraphicsPixmapItem *item = new QGraphicsPixmapItem(pixmap);
item->setPos(PIXMAP_SIZE * col, PIXMAP_SIZE * row);
m_scene->addItem(item);
m_mapItems[row][col] = item;
}
}
}
if (bottomRightViewPos.y() > vh)
{
int count = qFloor((bottomRightViewPos.y() - vh) / PIXMAP_SIZE) + 1; // 下侧离开视口瓦片数量
int oldBottomTileCoordY = m_bottomRightTileCoord.y; // 保存原下侧瓦片坐标Y
m_bottomRightTileCoord.y -= count; // 保存现下侧瓦片坐标Y
if (m_bottomRightTileCoord.y < 0)
m_bottomRightTileCoord.y = 0;
// 删除从下侧离开视口的图片
for (int row = oldBottomTileCoordY; row > m_bottomRightTileCoord.y; --row)
{
for (int col = m_topLeftTileCoord.x; col <= m_bottomRightTileCoord.x; ++col)
{
QGraphicsPixmapItem *item = m_mapItems[row][col];
m_scene->removeItem(item);
m_mapItems[row].remove(col);
delete item;
}
}
}
// 4、垂直瓦片坐标控制：判断最下侧瓦片是否完全进入视口，最上侧瓦片是否完全离开视口
if (bottomRightViewPos.y() + 255 < vh)
{
int count = qCeil((vh - (bottomRightViewPos.y() + 255)) / PIXMAP_SIZE); // 下侧进入视口瓦片数量
int oldBottomTileCoordY = m_bottomRightTileCoord.y; // 保存原下侧瓦片坐标Y
m_bottomRightTileCoord.y += count; // 保存现下侧瓦片坐标Y
if (m_bottomRightTileCoord.y >= mapSideCount)
m_bottomRightTileCoord.y = mapSideCount - 1;
// 增加从下侧进入视口的图片
for (int row = m_bottomRightTileCoord.y; row > oldBottomTileCoordY; --row)
{
for (int col = m_topLeftTileCoord.x; col <= m_bottomRightTileCoord.x; ++col)
{
QString fileName = QString("%1/Map_%2-%3.png").arg(dirPath)
.arg(QString::number(row + 1).rightJustified(2, '0')).arg(QString::number(col + 1).rightJustified(2, '0'));
QPixmap pixmap(fileName);
QGraphicsPixmapItem *item = new QGraphicsPixmapItem(pixmap);
item->setPos(PIXMAP_SIZE * col, PIXMAP_SIZE * row);
m_scene->addItem(item);
m_mapItems[row][col] = item;
}
}
}
if (topLeftViewPos.y() + 255 < 0)
{
int count = qFloor(fabs(topLeftViewPos.y()) / PIXMAP_SIZE); // 上侧离开视口瓦片数量
int oldTopTileCoordY = m_topLeftTileCoord.y; // 保存原上侧瓦片坐标Y
m_topLeftTileCoord.y += count; // 保存现上侧瓦片坐标Y
if (m_topLeftTileCoord.y >= mapSideCount)
m_topLeftTileCoord.y = mapSideCount - 1;
// 删除从上侧离开视口的图片
for (int row = oldTopTileCoordY; row < m_topLeftTileCoord.y; ++row)
{
for (int col = m_topLeftTileCoord.x; col <= m_bottomRightTileCoord.x; ++col)
{
QGraphicsPixmapItem *item = m_mapItems[row][col];
m_scene->removeItem(item);
m_mapItems[row].remove(col);
delete item;
}
}
}
}
}
到了这里，关于QGraphicsView实现简易地图4『局部加载-地图漫游』的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！
