STM32 CAN通讯滤波器几种模式的设置

这篇具有很好参考价值的文章主要介绍了STM32 CAN通讯滤波器几种模式的设置。希望对大家有所帮助。如果存在错误或未考虑完全的地方,请大家不吝赐教,您也可以点击"举报违法"按钮提交疑问。

RTR:0数据帧;1远程帧
IDE:0标准帧;1扩展帧
#define STANDARD_ID    0x0256     (11位)
#define EXTENDED_ID    0x00025648 (29位)

一、 过滤---标准帧ID

1. 32位过滤器-标识符屏蔽模式(一组筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;		
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdMask; 		
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_32bit; 		
CAN_FilterInitStructure.CAN_FilterIdHigh =STANDARD_ID<<5;		
CAN_FilterInitStructure.CAN_FilterIdLow =0;
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=0xFFE0;	
CAN_FilterInitStructure.CAN_FilterMaskIdLow=0;
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;	
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);	

 2. 32位过滤器-标识符列表模式(2个筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;		
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdList; 		
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_32bit; 		
CAN_FilterInitStructure.CAN_FilterIdHigh =STANDARD_ID<<5;		
CAN_FilterInitStructure.CAN_FilterIdLow =0;
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=(STANDARD_ID+2)<<5;	
CAN_FilterInitStructure.CAN_FilterMaskIdLow=0;
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;	
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);

 3. 16位过滤器-标识符屏蔽模式(2组筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;	
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdMask; 		
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_16bit; 	
CAN_FilterInitStructure.CAN_FilterIdHigh =STANDARD_ID<<5;		
CAN_FilterInitStructure.CAN_FilterIdLow =(STANDARD_ID+1)<<5;
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=0xFFE0;	
CAN_FilterInitStructure.CAN_FilterMaskIdLow=0xFFE0;
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);	

 4. 16位过滤器-标识符列表模式(4个筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;		
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdList; 		
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_16bit; 	
CAN_FilterInitStructure.CAN_FilterIdHigh =STANDARD_ID<<5;		
CAN_FilterInitStructure.CAN_FilterIdLow =(STANDARD_ID+1)<<5;
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=(STANDARD_ID+2)<<5;
CAN_FilterInitStructure.CAN_FilterMaskIdLow=(STANDARD_ID+3)<<5;
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;	
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);	

 二、过滤-扩展帧ID(只能使用32位滤波器)

 1. 32位过滤器-标识符屏蔽模式(一组筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;		
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdMask; 	
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_32bit; 		
CAN_FilterInitStructure.CAN_FilterIdHigh =EXTENDED_ID>>13;	//左移3,再右移16
CAN_FilterInitStructure.CAN_FilterIdLow =(EXTENDED_ID << 3) | (1U << 2); //IDE=1
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=0xFFFF;	
CAN_FilterInitStructure.CAN_FilterMaskIdLow=0xFFF8 | (1U << 2);   //IDE=1
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;	
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);	

2. 32位过滤器-标识符列表模式(2个筛选ID)

can滤波模式,CAN通讯,单片机,编辑器,c语言

CAN_FilterInitStructure.CAN_FilterNumber=0;		
CAN_FilterInitStructure.CAN_FilterMode  =CAN_FilterMode_IdList; 	
CAN_FilterInitStructure.CAN_FilterScale  =CAN_FilterScale_32bit; 		
CAN_FilterInitStructure.CAN_FilterIdHigh =EXTENDED_ID>>13;	//左移3,再右移16
CAN_FilterInitStructure.CAN_FilterIdLow =(EXTENDED_ID << 3) | (1U << 2); //IDE=1
CAN_FilterInitStructure.CAN_FilterMaskIdHigh=(EXTENDED_ID+1)>>13;	
CAN_FilterInitStructure.CAN_FilterMaskIdLow=((EXTENDED_ID+1) << 3) | (1U << 2);
CAN_FilterInitStructure.CAN_FilterFIFOAssignment=CAN_Filter_FIFO0;	
CAN_FilterInitStructure.CAN_FilterActivation=ENABLE;
CAN_FilterInit(&CAN_FilterInitStructure);	

 文章来源地址https://www.toymoban.com/news/detail-646961.html

到了这里,关于STM32 CAN通讯滤波器几种模式的设置的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处: 如若内容造成侵权/违法违规/事实不符,请点击违法举报进行投诉反馈,一经查实,立即删除!

领支付宝红包 赞助服务器费用

相关文章

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

博客赞助

微信扫一扫打赏

请作者喝杯咖啡吧~博客赞助

支付宝扫一扫领取红包,优惠每天领

二维码1

领取红包

二维码2

领红包