Centos 8 网卡connect: Network is unreachable错误解决办法-Toy模板网

这篇具有很好参考价值的文章主要介绍了Centos 8 网卡connect: Network is unreachable错误解决办法。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

现象1、ifconfig没有ens160配置

[test@localhost ~]$ ifconfig

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 4 bytes 240 (240.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 240 (240.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:5c:db:27 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
现象2、使用ping或者nmcli命令提示NetworkManager is not running.

[test@localhost ~]$ ping 192.168.215.1
connect: Network is unreachable
[test@localhost ~]$ nmcli
Error: NetworkManager is not running.
先启动网络管理器

 systemctl start NetworkManager

设置自启动

sudo systemctl enable NetworkManager

再使用nmcli查看态为unmanaged

[test@localhost ~]$ nmcli
virbr0: unmanaged
"virbr0"
bridge, 52:54:00:5C:DB:27, sw, mtu 1500

ens160: unmanaged
"VMware VMXNET3"
ethernet (vmxnet3), 00:0C:29:D1:E7:5F, hw, mtu 1500

lo: unmanaged
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536

virbr0-nic: unmanaged
"virbr0-nic"
tun, 52:54:00:5C:DB:27, sw, mtu 1500

使用nmcli connection up ens160和nmcli device up ens160 ，出现device is strictly unmanaged报错

nmcli connection up ens160
Error: Connection activation failed: No suitable device found for this connection (device lo not available because device is strictly unmanaged).

nmcli device up ens160
Error: Failed to add/activate new connection: Connection 'ens160' is not available on device ens160 because device is strictly unmanaged
执行以下命令：

nmcli device set ens160 managed yes 
nmcli device status

DEVICE TYPE STATE CONNECTION
br-1c57ae1d2940 bridge unmanaged --
br-37a032e957ba bridge unmanaged --
br-b365648bec89 bridge unmanaged --
docker0 bridge unmanaged --
ens160 ethernet unmanaged --
veth1ea0122 ethernet unmanaged --
veth5707956 ethernet unmanaged --
lo loopback unmanaged --
解决办法：
查看网络状态

nmcli networking

手动开启接管

nmcli networking on

查看连接状态

nmcli connection show

nmcli device status

Centos 8 网卡connect: Network is unreachable错误解决办法,Centos,centos,linux,运维

或者stop服务，再修改配置文件；最后启动服务文章来源地址https://www.toymoban.com/news/detail-654351.html

systemctl stop NetworkManager

vi /var/lib/NetworkManager/NetworkManager.state

[main]
NetworkingEnabled=true      //修改为true
WirelessEnabled=true
WWANEnabled=true

systemctl start NetworkManager

到了这里，关于Centos 8 网卡connect: Network is unreachable错误解决办法的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！

Centos 8 网卡connect: Network is unreachable错误解决办法

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏

支付宝扫一扫领取红包，优惠每天领

二维码1

二维码2