Android OkHttp 源码浅析二-Toy模板网

这篇具有很好参考价值的文章主要介绍了Android OkHttp 源码浅析二。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

OkHttp 配置参数:

 @get:JvmName("dispatcher") val dispatcher: Dispatcher = builder.dispatcher

  @get:JvmName("connectionPool") val connectionPool: ConnectionPool = builder.connectionPool

  /**
   * Returns an immutable list of interceptors that observe the full span of each call: from before
   * the connection is established (if any) until after the response source is selected (either the
   * origin server, cache, or both).
   */
  @get:JvmName("interceptors") val interceptors: List<Interceptor> =
      builder.interceptors.toImmutableList()

  /**
   * Returns an immutable list of interceptors that observe a single network request and response.
   * These interceptors must call [Interceptor.Chain.proceed] exactly once: it is an error for
   * a network interceptor to short-circuit or repeat a network request.
   */
  @get:JvmName("networkInterceptors") val networkInterceptors: List<Interceptor> =
      builder.networkInterceptors.toImmutableList()

  @get:JvmName("eventListenerFactory") val eventListenerFactory: EventListener.Factory =
      builder.eventListenerFactory

  @get:JvmName("retryOnConnectionFailure") val retryOnConnectionFailure: Boolean =
      builder.retryOnConnectionFailure

  @get:JvmName("authenticator") val authenticator: Authenticator = builder.authenticator

  @get:JvmName("followRedirects") val followRedirects: Boolean = builder.followRedirects

  @get:JvmName("followSslRedirects") val followSslRedirects: Boolean = builder.followSslRedirects

  @get:JvmName("cookieJar") val cookieJar: CookieJar = builder.cookieJar

  @get:JvmName("cache") val cache: Cache? = builder.cache

  @get:JvmName("dns") val dns: Dns = builder.dns

  @get:JvmName("proxy") val proxy: Proxy? = builder.proxy

  @get:JvmName("proxySelector") val proxySelector: ProxySelector =
      when {
        // Defer calls to ProxySelector.getDefault() because it can throw a SecurityException.
        builder.proxy != null -> NullProxySelector
        else -> builder.proxySelector ?: ProxySelector.getDefault() ?: NullProxySelector
      }

  @get:JvmName("proxyAuthenticator") val proxyAuthenticator: Authenticator =
      builder.proxyAuthenticator

  @get:JvmName("socketFactory") val socketFactory: SocketFactory = builder.socketFactory

  private val sslSocketFactoryOrNull: SSLSocketFactory?

  @get:JvmName("sslSocketFactory") val sslSocketFactory: SSLSocketFactory
    get() = sslSocketFactoryOrNull ?: throw IllegalStateException("CLEARTEXT-only client")

  @get:JvmName("x509TrustManager") val x509TrustManager: X509TrustManager?

  @get:JvmName("connectionSpecs") val connectionSpecs: List<ConnectionSpec> =
      builder.connectionSpecs

  @get:JvmName("protocols") val protocols: List<Protocol> = builder.protocols

  @get:JvmName("hostnameVerifier") val hostnameVerifier: HostnameVerifier = builder.hostnameVerifier

  @get:JvmName("certificatePinner") val certificatePinner: CertificatePinner

  @get:JvmName("certificateChainCleaner") val certificateChainCleaner: CertificateChainCleaner?

  /**
   * Default call timeout (in milliseconds). By default there is no timeout for complete calls, but
   * there is for the connect, write, and read actions within a call.
   */
  @get:JvmName("callTimeoutMillis") val callTimeoutMillis: Int = builder.callTimeout

  /** Default connect timeout (in milliseconds). The default is 10 seconds. */
  @get:JvmName("connectTimeoutMillis") val connectTimeoutMillis: Int = builder.connectTimeout

  /** Default read timeout (in milliseconds). The default is 10 seconds. */
  @get:JvmName("readTimeoutMillis") val readTimeoutMillis: Int = builder.readTimeout

  /** Default write timeout (in milliseconds). The default is 10 seconds. */
  @get:JvmName("writeTimeoutMillis") val writeTimeoutMillis: Int = builder.writeTimeout

  /** Web socket and HTTP/2 ping interval (in milliseconds). By default pings are not sent. */
  @get:JvmName("pingIntervalMillis") val pingIntervalMillis: Int = builder.pingInterval

  /**
   * Minimum outbound web socket message size (in bytes) that will be compressed.
   * The default is 1024 bytes.
   */
  @get:JvmName("minWebSocketMessageToCompress")

dispatcher 用于线程调度

connectionPool 连接池 64 个or 5 host 可以提升复用性方便管理和提升性能

interceptors

networkInterceptors

eventListenerFactory 事件监听器连接建立发送head body 等

retryOnConnectionFailure 连接 / 请求失败是否重置

authenticator 自动认证修正比如 401 无权限访问等可以用于刷新token

followRedirects 是否继续重定向

followSslRedirects 在followRedirects 开启时协议切换时是否继续重定向比如http 切换https 默认true 文章来源地址https://www.toymoban.com/news/detail-666985.html

cookieJar 存储器 存储cookie 默认是空实现

cache 本地缓存

dns 域名系统 域名解析为ip 函数为 lookup getAllByName List inntAddress 通过域名返回IPList---InetAddress.getAllByName(hostName)

proxy 代理 转发  代理服务器 代理多种方式 还有反向代理 类型 DIRECT 直连 HTTP SOCKS,默认NO_PROXY

proxySelector 判断是否代理 通过select 方法 返回List<Proxy>

proxyAuthenticator 如果代理不可用 需要授权 需要验证机制

socketFactory http请求本质是java socket 通过socketFactory  创建

sslSocketFactory ssl 请求, tls ssl 加密 连接

x509TrustManager 证书验证器,通过证书和签名进行验证 ,X509 证书格式

connectionSpecs List 连接标准 规范,https 连接 客户端 发送tls 连接 的规范 比如连接套件 非对称加密等,ConnectionSpec 类定义各种规范比如 RESTRICTED_TLS支持TLS 1.3 1.2 ,MODERN_TLS1.3 1.2 ,COMPATIBLE_TLS 支持 1.3  1.2 1.1 1.0,CLEARTEXT 明文 传输https 报文 不用tls

protocols List, 支持协力的版本号 比如 1.0 , 1.1, SPDY2,SPDY3 ,HTTP2 最好使用加密 h2c ,H2_PRIOR 非加密,

hostnameVerifier: 验证合法性 域名 只验证第一个 [0]

certificatePinner:加强验证,可以配置证书 hash

certificateChainCleaner:=== 证书验证相关 操作X509

callTimeoutMillis 超时

connectTimeoutMillis 连接超时

readTimeoutMillis 读取超时

writeTimeoutMillis 写入超时

pingIntervalMillis 心跳机制  websocket / http2 使用

到了这里，关于Android OkHttp 源码浅析二的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！

Android OkHttp 源码浅析二

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏

支付宝扫一扫领取红包，优惠每天领

二维码1

二维码2