open3d，python-pcl，numpy 点云数据格式转换-Toy模板网

这篇具有很好参考价值的文章主要介绍了open3d，python-pcl，numpy 点云数据格式转换。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

open3d，python-pcl，numpy 点云数据格式转换

NumPy 转 open3d.PointCloud

参考: https://www.codenong.com/cs106756630/
numpy转open3D需要借助Vector3dVector函数，这样可以直接赋值与open3d.PointCloud.points，具体操作如下，假设(x, y, z)、(n_x, n_y, n_z)、(r, g, b)分别是一个n*3numpy数组(这三者不一定全部需要)，则对于点数，法向量和颜色的转换都可以借助Vector3dVector函数，具体操作如下：文章来源地址https://www.toymoban.com/news/detail-692056.html

import numpy as np
import open3D as o3d
pcd = o3d.geometry.PointCloud()
pcd.points = o3d.utility.Vector3dVector(xyz)
pcd.normals = o3d.utility.Vector3dVector(nxnynz)
pcd.colors = o3d.utility.Vector3dVector(rgb)

open3d.PointCloud 转 NumPy

import numpy as np
import open3d as o3d
# Load saved point cloud and visualize it
pcd_load = o3d.io.read_point_cloud("../xxx.ply")#或 xxx.pcd 等常见格式

# convert Open3D.o3d.geometry.PointCloud to numpy array
xyz_load = np.asarray(pcd_load.points)
o3d.visualization.draw_geometries([pcd_load])

numpy 数组保存为 pcd 文件

import numpy as np
import open3d as o3d
# pointcloud_interest 为 numpy数组
# pointcloud_interest =rays_end_all.numpy()    
pcd = o3d.geometry.PointCloud()
pcd.points = o3d.utility.Vector3dVector(pointcloud_interest)                
# print("len(pcd.points):",len(pcd.points))#add hxz
o3d.io.write_point_cloud("/home/xx/pointcloud_interest.pcd", pcd)

python pcl 点云转 numpy

import pcl
import numpy as np
# 读取pcl 格式点云 并转换为 numpy数组
pointcloud_source = pcl.load('xx.pcd')
pointcloud_source_numpy = pointcloud_source.to_array()
# pointcloud_source_numpy = pointcloud_source.to_array()[:, :4]

numpy 转 python pcl点云

import pcl
import numpy as np

# 转换为 pcl 格式点云，输入点云 points_，形状(N,3)
if(0):  # 将 double 转换为 float32_t， 可能需要
        points=np.ones((points_.shape[0],3),np.float32)
        for i in range(points_.shape[0]):
                points[i][0]=points_[i][0]
                points[i][1]=points_[i][1]
                points[i][2]=points_[i][2]        
        pointcloud_trans = pcl.PointCloud(points)# numpy 数组转 pcl                
if(1):        
        pointcloud_trans = pcl.PointCloud(points_)# numpy 数组转 pcl