ac+ap无线网络设置
1,网络基本布局
2,设置地址池vlan_10
ip pool vlan_10
gateway-list 192.168.10.120
network 192.168.10.0 mask 255.255.255.0
lease day 3 hour 0 minute 0
dns-list 6.6.6.6
3,vlan 10添加ip设置全局dhcp
interface Vlanif10
ip address 192.168.10.120 255.255.255.0
dhcp select global
4,端口号10选择trunk模式,标签vlan10
interface GigabitEthernet0/0/10
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 2 to 4094
5,vlan 10设置192.168.1.120,设置到路由器的静态路由
interface Vlanif1
ip address 192.168.1.120 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 192.168.1.130
6,设置vlan10为管理下发接口
[AC6605]capwap source interface Vlanif 10
7, 进入到wlan, 设置一个AP组ap-1
[AC6605]wlan
[AC6605-wlan-view]ap-group name ap-1
8, 认证模式为mac,把AP中的mac添加到AP组中
[AC6605-wlan-view]ap auth-mode mac-auth
[AC6605-wlan-view]ap-id 0 ap-mac 00E0-FCA0-5970
9, 给AP设置一个名称area1,把此AP添加到AP组ap-1中
[AC6605-wlan-view]ap-id 0
[AC6605-wlan-ap-0]ap-name area1
[AC6605-wlan-ap-0]ap-group ap-1
10,[Y/N]选择Y 输入display ap all命令 state为nor就是添加成功
[AC6605-wlan-ap-0]ap-group ap-1
Warning: This operation may cause AP reset. If the country code changes, it will
clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment… done.
11, 配置安全模板的名称lu
[AC6605-wlan-view]security-profile name lu
12, 设置安全密码a1234567
[AC6605-wlan-sec-prof-lu]security wpa2 psk pass-phrase a1234567 aes
13, 配置SSID模板的名称xn
[AC6605-wlan-view]ssid-profile name xn
14, wifi的连接名称wifixghn
[AC6605-wlan-ssid-prof-xn]ssid wifixghn
15, 配置vap模板的名称fw
[AC6605-wlan-view]vap-profile name fw
16, 把安全模板lu放入到vap模板
[AC6605-wlan-vap-prof-fw]security-profile lu
17, 把ssid模板xn放入到vap模板
[AC6605-wlan-vap-prof-fw]ssid-profile xn
18, 设置转发模式
[AC6605-wlan-vap-prof-fw]forward-mode tunnel
19, 设置业务vlan为vlan10
[AC6605-wlan-vap-prof-fw]service-vlan vlan-id 10
20, ap-group name ap-10
[AC6605-wlan-view]ap-group name ap-10
21, 将该 VAP 模板应用到所有射频接口上
[AC6605-wlan-ap-group-ap-1]vap-profile fw wlan 1 radio all
Info: This operation may take a few seconds, please wait…done.
[AC6605-wlan-ap-group-ap-1]文章来源:https://www.toymoban.com/news/detail-722594.html
22,连接网络输入a123456 进入cmd查看是否连接成功
文章来源地址https://www.toymoban.com/news/detail-722594.html
到了这里,关于ac+ap无线网络设置的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!