大小端
串口数据包解析
MDK stm32 小段模式
接收到的数据包：
DD 03 00 1B 11 59 00 00 00 00 17 70 00 00 2F 39 00 00 00 00 00 03 23 64 00 0E 02 0B 6E 0B 84 FC EA 77其中数据内容为：
DD 03 00 1B
11 59 //电压mV
00 00
00 00
17 70
00 00
2F 39
00 00
00 00
00 03
23
64
00
0E
02
0B 6E
0B 84
FC EA 77 我们设计的结构体
typedef struct
{
uint16_t total_voltage;
int16_t current;
uint16_t RM;
uint16_t FCC;
uint16_t cycle;
uint16_t date;
uint16_t balanced_l;
uint16_t balanced_h;
union
{
struct
{
uint16_t Cell_OV :1;
uint16_t Cell_UV :1;
uint16_t Pack_OV :1;
uint16_t Pack_UV :1;
uint16_t OTC :1;
uint16_t UTC :1;
uint16_t OTD :1;
uint16_t UTD :1;
uint16_t OCC :1;
uint16_t OCD :1;
uint16_t SC :1;
uint16_t AFE_ERR :1;
uint16_t PF :1;
uint16_t RSVD1 :1;
uint16_t RSVD2 :1;
uint16_t RSVD3 :1;
}StatusBit;
uint16_t StatusWord;
}ProtectStatus;
uint8_t FW_ver;
uint8_t RSOC;
union
{
struct
{
uint8_t CHG_FET :1;
uint8_t DSG_FET :1;
uint8_t RSVD1 :1;
uint8_t RSVD2 :1;
uint8_t RSVD3 :1;
uint8_t RSVD4 :1;
uint8_t RSVD5 :1;
uint8_t RSVD6 :1;
}StatusBit;
uint8_t StatusByte;
}FETStatus;
uint8_t number_of_series_num;
uint8_t NTC_sensor_num;
uint16_t NTC_temperature[NUMBER_NTC_SENSOR];
}BMS_03_BaseInfo_statues;使用内容复制函数
memcpy(&bms_baseinfo,buf+4,buf[3]);想要的数据：
total_voltage = 0x1159实际的数据：
total_voltage = 0x5911解决方法：
| CMSIS都已经给你写好的，请看core_cm3.h |
Name Core Generated CPU Instruction Description
void __NOP (void) M0, M3, M4 NOP No Operation
void __WFI (void) M0, M3, M4 WFI Wait for Interrupt
void __WFE (void) M0, M3, M4 WFE Wait for Event
void __SEV (void) M0, M3, M4 SEV Set Event
void __ISB (void) M0, M3, M4 ISB Instruction Synchronization Barrier
void __DSB (void) M0, M3, M4 DSB Data Synchronization Barrier
void __DMB (void) M0, M3, M4 DMB Data Memory Barrier
uint32_t __REV (uint32_t value) M0, M3, M4 REV Reverse byte order in integer value.
uint32_t __REV16 (uint16_t value) M0, M3, M4 REV16 Reverse byte order in unsigned short value.
sint32_t __REVSH (sint16_t value) M0, M3, M4 REVSH Reverse byte order in signed short value with sign extension to integer.
uint32_t __RBIT (uint32_t value) M3, M4 RBIT Reverse bit order of value
uint8_t __LDREXB (uint8_t *addr) M3, M4 LDREXB Load exclusive byte
uint16_t __LDREXH (uint16_t *addr) M3, M4 LDREXH Load exclusive half-word
uint32_t __LDREXW (uint32_t *addr) M3, M4 LDREXW Load exclusive word
uint8_t __STREXB (uint8_t value, uint8_t *addr) M3, M4 STREXB Store exclusive byte
uint16_t __STREXH (uint16_t value, uint16_t *addr) M3, M4 STREXH Store exclusive half-word
uint32_t __STREXW (uint32_t value, uint32_t *addr) M3, M4 STREXW Store exclusive word
void __CLREX (void) M3, M4 CLREX Remove the exclusive lock created by __LDREXB, __LDREXH, or __LDREXW
void __SSAT (void) M3, M4 SSAT saturate a signed value
void __USAT (void) M3, M4 USAT saturate an unsigned value
字节对齐
执行完这个代码后
memcpy(&bms_baseinfo,buf+4,buf[3]);我们希望
NTC_temperature[0] = 0x6E0B;
NTC_temperature[1] = 0x840B;实际上文章来源：https://www.toymoban.com/news/detail-727438.html
NTC_temperature[0] = 0x0B6E;
NTC_temperature[1] = 0x0084;解决方法：文章来源地址https://www.toymoban.com/news/detail-727438.html
#pragma pack (1)
//结构体
#pragma pack ()到了这里，关于STM32 大小端与字节对齐使用记录的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！
