【DPDK 】dpdk测试发udp包-Toy模板网

这篇具有很好参考价值的文章主要介绍了【DPDK 】dpdk测试发udp包。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

send.c文章来源地址https://www.toymoban.com/news/detail-767588.html



#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>

#include <stdio.h>
#include <arpa/inet.h>


#define ENABLE_SEND		1
#define ENABLE_ARP		1



#define NUM_MBUFS (4096-1)

#define BURST_SIZE	32


#if ENABLE_SEND

static uint32_t gSrcIp; //
static uint32_t gDstIp;

static uint8_t gSrcMac[RTE_ETHER_ADDR_LEN];
static uint8_t gDstMac[RTE_ETHER_ADDR_LEN];

static uint16_t gSrcPort;
static uint16_t gDstPort;

#endif


int gDpdkPortId = 0;



static const struct rte_eth_conf port_conf_default = {
	.rxmode = {.max_rx_pkt_len = RTE_ETHER_MAX_LEN }
};

static void ng_init_port(struct rte_mempool *mbuf_pool) {

	uint16_t nb_sys_ports= rte_eth_dev_count_avail(); //
	if (nb_sys_ports == 0) {
		rte_exit(EXIT_FAILURE, "No Supported eth found\n");
	}

	struct rte_eth_dev_info dev_info;
	rte_eth_dev_info_get(gDpdkPortId, &dev_info); //
	
	const int num_rx_queues = 1;
	const int num_tx_queues = 1;
	struct rte_eth_conf port_conf = port_conf_default;
	rte_eth_dev_configure(gDpdkPortId, num_rx_queues, num_tx_queues, &port_conf);


	if (rte_eth_rx_queue_setup(gDpdkPortId, 0 , 1024, 
		rte_eth_dev_socket_id(gDpdkPortId),NULL, mbuf_pool) < 0) {

		rte_exit(EXIT_FAILURE, "Could not setup RX queue\n");

	}
	
#if ENABLE_SEND
	struct rte_eth_txconf txq_conf = dev_info.default_txconf;
	txq_conf.offloads = port_conf.rxmode.offloads;
	if (rte_eth_tx_queue_setup(gDpdkPortId, 0 , 1024, 
		rte_eth_dev_socket_id(gDpdkPortId), &txq_conf) < 0) {
		
		rte_exit(EXIT_FAILURE, "Could not setup TX queue\n");
		
	}
#endif

	if (rte_eth_dev_start(gDpdkPortId) < 0 ) {
		rte_exit(EXIT_FAILURE, "Could not start\n");
	}

	

}


static int ng_encode_udp_pkt(uint8_t *msg, unsigned char *data, uint16_t total_len) {

	// encode 

	// 1 ethhdr
	struct rte_ether_hdr *eth = (struct rte_ether_hdr *)msg;
	rte_memcpy(eth->s_addr.addr_bytes, gSrcMac, RTE_ETHER_ADDR_LEN);
	rte_memcpy(eth->d_addr.addr_bytes, gDstMac, RTE_ETHER_ADDR_LEN);
	eth->ether_type = htons(RTE_ETHER_TYPE_IPV4);
	

	// 2 iphdr 
	struct rte_ipv4_hdr *ip = (struct rte_ipv4_hdr *)(msg + sizeof(struct rte_ether_hdr));
	ip->version_ihl = 0x45;
	ip->type_of_service = 0;
	ip->total_length = htons(total_len - sizeof(struct rte_ether_hdr));
	ip->packet_id = 0;
	ip->fragment_offset = 0;
	ip->time_to_live = 64; // ttl = 64
	ip->next_proto_id = IPPROTO_UDP;
	ip->src_addr = gSrcIp;
	ip->dst_addr = gDstIp;
	
	ip->hdr_checksum = 0;
	ip->hdr_checksum = rte_ipv4_cksum(ip);

	// 3 udphdr 

	struct rte_udp_hdr *udp = (struct rte_udp_hdr *)(msg + sizeof(struct rte_ether_hdr) + sizeof(struct rte_ipv4_hdr));
	udp->src_port = gSrcPort;
	udp->dst_port = gDstPort;
	uint16_t udplen = total_len - sizeof(struct rte_ether_hdr) - sizeof(struct rte_ipv4_hdr);
	udp->dgram_len = htons(udplen);

	rte_memcpy((uint8_t*)(udp+1), data, udplen);

	udp->dgram_cksum = 0;
	udp->dgram_cksum = rte_ipv4_udptcp_cksum(ip, udp);

	struct in_addr addr;
	addr.s_addr = gSrcIp;
	printf(" --> src: %s:%d, ", inet_ntoa(addr), ntohs(gSrcPort));

	addr.s_addr = gDstIp;
	printf("dst: %s:%d\n", inet_ntoa(addr), ntohs(gDstPort));

	return 0;
}


static struct rte_mbuf * ng_send(struct rte_mempool *mbuf_pool, uint8_t *data, uint16_t length) {

	// mempool --> mbuf

	const unsigned total_len = length + 42;

	struct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);
	if (!mbuf) {
		rte_exit(EXIT_FAILURE, "rte_pktmbuf_alloc\n");
	}
	mbuf->pkt_len = total_len;
	mbuf->data_len = total_len;

	uint8_t *pktdata = rte_pktmbuf_mtod(mbuf, uint8_t*);

	ng_encode_udp_pkt(pktdata, data, total_len);

	return mbuf;

}


int main(int argc, char *argv[]) {

	if (rte_eal_init(argc, argv) < 0) {
		rte_exit(EXIT_FAILURE, "Error with EAL init\n");
		
	}

	struct rte_mempool *mbuf_pool = rte_pktmbuf_pool_create("mbuf pool", NUM_MBUFS,
		0, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
	if (mbuf_pool == NULL) {
		rte_exit(EXIT_FAILURE, "Could not create mbuf pool\n");
	}

	ng_init_port(mbuf_pool);

	rte_eth_macaddr_get(gDpdkPortId, (struct rte_ether_addr *)gSrcMac);

	while (1) {

		struct rte_mbuf *mbufs[BURST_SIZE];
		unsigned num_recvd = rte_eth_rx_burst(gDpdkPortId, 0, mbufs, BURST_SIZE);
		if (num_recvd > BURST_SIZE) {
			rte_exit(EXIT_FAILURE, "Error receiving from eth\n");
		}

		unsigned i = 0;
		for (i = 0;i < num_recvd;i ++) {

			struct rte_ether_hdr *ehdr = rte_pktmbuf_mtod(mbufs[i], struct rte_ether_hdr*);
			if (ehdr->ether_type != rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4)) {
				continue;
			}

			struct rte_ipv4_hdr *iphdr =  rte_pktmbuf_mtod_offset(mbufs[i], struct rte_ipv4_hdr *, 
				sizeof(struct rte_ether_hdr));
			
			if (iphdr->next_proto_id == IPPROTO_UDP) {

				struct rte_udp_hdr *udphdr = (struct rte_udp_hdr *)(iphdr + 1);

#if ENABLE_SEND //

				rte_memcpy(gDstMac, ehdr->s_addr.addr_bytes, RTE_ETHER_ADDR_LEN);
				
				rte_memcpy(&gSrcIp, &iphdr->dst_addr, sizeof(uint32_t));
				rte_memcpy(&gDstIp, &iphdr->src_addr, sizeof(uint32_t));

				rte_memcpy(&gSrcPort, &udphdr->dst_port, sizeof(uint16_t));
				rte_memcpy(&gDstPort, &udphdr->src_port, sizeof(uint16_t));

#endif

				uint16_t length = ntohs(udphdr->dgram_len);
				*((char*)udphdr + length) = '\0';

				struct in_addr addr;
				addr.s_addr = iphdr->src_addr;
				printf("src: %s:%d, ", inet_ntoa(addr), ntohs(udphdr->src_port));

				addr.s_addr = iphdr->dst_addr;
				printf("dst: %s:%d, %s\n", inet_ntoa(addr), ntohs(udphdr->dst_port), 
					(char *)(udphdr+1));

#if ENABLE_SEND

				struct rte_mbuf *txbuf = ng_send(mbuf_pool, (uint8_t *)(udphdr+1), length);
				rte_eth_tx_burst(gDpdkPortId, 0, &txbuf, 1);
				rte_pktmbuf_free(txbuf);
				
#endif

				rte_pktmbuf_free(mbufs[i]);
			}
			
		}

	}

}