每次用到kafka时都会出现各种奇怪的问题,综合实践,下面汇总下主要操作步骤:
Docker镜像形式启动
zookeeper启动
docker run -d --name zookeeper -p 2181:2181 -t wurstmeister/zookeeper
kafka启动
docker run --name kafka01 -p 9092:9092 -e KAFKA_BROKER_ID=0 -e KAFKA_ZOOKEEPER_CONNECT=150.158.16.123:12348 -e KAFKA_ADVERTISED_LISTENERS=PLAINTEXT://150.158.16.123:9092 -e KAFKA_LISTENERS=PLAINTEXT://0.0.0.0:9092 -d wurstmeister/kafka
进入kafka容器
docker exec -it [容器id] /bin/bash
创建topic
进入容器,在/opt/kafka_2.13-2.8.1/bin
目录下创建topic
./kafka-topics.sh --create --zookeeper 150.158.16.123:12348 --replication-factor 1 --partitions 1 --topic mykafka
./kafka-topics.sh --create --zookeeper 150.158.16.123:2181 --replication-factor 1 --partitions 1 --topic mykafka
运行生产者
运行消费者
单机形式启动
前提
1、Linux 机器
2、环境已准备好JDK,如果还没有装,推荐用yum一键安装
yum install -y java-1.8.0-openjdk.x86_64
检验:
[root@localhost ~]# java -version
openjdk version "1.8.0_362"
OpenJDK Runtime Environment (build 1.8.0_362-b08)
OpenJDK 64-Bit Server VM (build 25.362-b08, mixed mode)
3、将kafka压缩包上传到你的Linux
配置文件关注config
目录下的zookeeper.properties
和server.properties
,启动服务时要指定
配置-启动
有默认配置,可不做修改(有需要可以自定义启动端口和数据存放位置等参数)
1、先启动自带的 Zookeeper:
[root@localhost bin]# ./zookeeper-server-start.sh ../config/zookeeper.properties
OpenJDK 64-Bit Server VM warning: If the number of processors is expected to increase from one, then you should configure the number of parallel GC threads appropriately using -XX:ParallelGCThreads=N
[2023-02-26 14:14:52,759] INFO Reading configuration from: ../config/zookeeper.properties (org.apache.zookeeper.server.quorum.QuorumPeerConfig)
[2023-02-26 14:14:52,766] INFO autopurge.snapRetainCount set to 3 (org.apache.zookeeper.server.DatadirCleanupManager)
[2023-02-26 14:14:52,767] INFO autopurge.purgeInterval set to 0 (org.apache.zookeeper.server.DatadirCleanupManager)
[2023-02-26 14:14:52,767] INFO Purge task is not scheduled. (org.apache.zookeeper.server.DatadirCleanupManager)
[2023-02-26 14:14:52,767] WARN Either no config or no quorum defined in config, running in standalone mode (org.apache.zookeeper.server.quorum.QuorumPeerMain)
[2023-02-26 14:14:52,783] INFO Reading configuration from: ../config/zookeeper.properties (org.apache.zookeeper.server.quorum.QuorumPeerConfig)
[2023-02-26 14:14:52,784] INFO Starting server (org.apache.zookeeper.server.ZooKeeperServerMain)
[2023-02-26 14:14:52,796] INFO Server environment:zookeeper.version=3.4.14-4c25d480e66aadd371de8bd2fd8da255ac140bcf, built on 03/06/2019 16:18 GMT (org.apache.zookeeper.server.ZooKeeperServer)
[2023-02-26 14:14:52,796] INFO Server environment:host.name=localhost (org.apache.zookeeper.server.ZooKeeperServer)
[2023-02-26 14:14:52,796] INFO Server environment:java.version=1.8.0_362 (org.apache.zookeeper.server.ZooKeeperServer)
[2023-02-26 14:14:52,796] INFO Server environment:java.vendor=Red Hat, Inc. (org.apache.zookeeper.server.ZooKeeperServer)
[2023-02-26 14:14:52,796] INFO Server environment:java.home=/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.362.b08-1.el7_9.x86_64/jre (org.apache.zookeeper.server.ZooKeeperServer)
(省略大部分)
2、启动 Kafka
[root@localhost kafka_2.12-2.3.0]# bin/kafka-server-start.sh config/server.properties
OpenJDK 64-Bit Server VM warning: If the number of processors is expected to increase from one, then you should configure the number of parallel GC threads appropriately using -XX:ParallelGCThreads=N
[2023-02-26 14:16:00,261] INFO Registered kafka:type=kafka.Log4jController MBean (kafka.utils.Log4jControllerRegistration$)
[2023-02-26 14:16:01,004] INFO Registered signal handlers for TERM, INT, HUP (org.apache.kafka.common.utils.LoggingSignalHandler)
[2023-02-26 14:16:01,024] INFO starting (kafka.server.KafkaServer)
[2023-02-26 14:16:01,025] INFO Connecting to zookeeper on localhost:2181 (kafka.server.KafkaServer)
[2023-02-26 14:16:01,068] INFO [ZooKeeperClient Kafka server] Initializing a new session to localhost:2181. (kafka.zookeeper.ZooKeeperClient)
[2023-02-26 14:16:01,072] INFO Client environment:zookeeper.version=3.4.14-4c25d480e66aadd371de8bd2fd8da255ac140bcf, built on 03/06/2019 16:18 GMT (org.apache.zookeeper.ZooKeeper)
[2023-02-26 14:16:01,072] INFO Client environment:host.name=localhost (org.apache.zookeeper.ZooKeeper)
[2023-02-26 14:16:01,072] INFO Client environment:java.version=1.8.0_362 (org.apache.zookeeper.ZooKeeper)
[2023-02-26 14:16:01,072] INFO Client environment:java.vendor=Red Hat, Inc. (org.apache.zookeeper.ZooKeeper)
[2023-02-26 14:16:01,072] INFO Client environment:java.home=/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.362.b08-1.el7_9.x86_64/jre (org.apache.zookeeper.ZooKeeper)
(省略大部分)
上述步骤只要启动过程没有报错信息,一般是没有问题的
测试
1、创建个topic
[root@localhost bin]# ./kafka-topics.sh --create --zookeeper 192.168.154.134:2181 --replication-factor 1 --partitions 1 --topic test
Created topic test.
2、查看topic列表
[root@localhost bin]# ./kafka-topics.sh --zookeeper 192.168.154.134:2181 --list
OpenJDK 64-Bit Server VM warning: If the number of processors is expected to increase from one, then you should configure the number of parallel GC threads appropriately using -XX:ParallelGCThreads=N
test
3、启动生产者
[root@localhost bin]# ./kafka-console-producer.sh --broker-list 192.168.154.134:9092 --topic test
>hi
>什么意思啊
4、启动消费者
[root@localhost bin]# ./kafka-console-consumer.sh --bootstrap-server 192.168.154.134:9092 --topic test
hi
什么意思啊
正常启动,OK!
可视化:kafka-manager
镜像下载
docker pull sheepkiller/kafka-manager
运行容器
docker run -d --name kafka-manager -p 12349:9000 --link zookeeper --link kafka01 --env ZK_HOSTS=zookeeper:2181 sheepkiller/kafka-manager
然后访问对应的IP:端口
即可进入管理页面
注意:
ZK_HOSTS
后面在web页面上要用到!
管理界面
进入主页面后,点击 Add Cluster
添加集群信息
然后填写配置信息,主要填写集群名称,Zookeeper的Hosts,还有指定kafka版本(选个跟你所使用的kafka版本号最接近的就行),其他的一些配置按默认的就行。
当你正确连接上以后,就能看到你的集群啦,如:
更多关于kafka可视化操作就由你慢慢探索吧!这里将你引进门!
注意:
如果你在启动
kafka manager
这个容器时指定了ZK_HOSTS
,那么Cluster Zookeeper Hosts这项填的内容要和ZK_HOSTS
一致,否则会出现连接不上,连接超时等情况。如下图:另外有些配置默认值是1,但是你得将其改成1以上的整数,否则不能正确保存提交。如:
注意
kafka版本不同,响应的api有区别
本版本是2.11
注意3.x是 --bootstrap-server localhost:9092方式新建,kafka2.x是以–zookeeper方式创建。下面查看新建的topic。
奇葩问题
1.重启docker失败?
[root@localhost ~]# systemctl restart docker
Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.
[root@localhost ~]# journalctl -xe
-- The result is failed.
2月 22 02:01:53 localhost.localdomain systemd[1]: Unit docker.service entered failed state.
2月 22 02:01:53 localhost.localdomain systemd[1]: Unit docker.service entered failed state.
2月 22 02:01:53 localhost.localdomain systemd[1]: docker.service failed.
2月 22 02:01:55 localhost.localdomain systemd[1]: docker.service holdoff time over, scheduling restart.
2月 22 02:01:55 localhost.localdomain systemd[1]: Stopped Docker Application Container Engine.
-- Subject: Unit docker.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit docker.service has finished shutting down.
2月 22 02:01:55 localhost.localdomain systemd[1]: start request repeated too quickly for docker.service
2月 22 02:01:55 localhost.localdomain systemd[1]: Failed to start Docker Application Container Engine.
-- Subject: Unit docker.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit docker.service has failed.
--
-- The result is failed.
原因:修改文件/etc/docker/daemon.json
时不规范,可能存在空格什么的
解决:
[root@localhost ~]# cat <<EOF >/etc/docker/daemon.json
> {
> "registry-mirrors": ["https://registry.docker-cn.com"]
> }
> EOF
[root@localhost ~]# cat /etc/docker/daemon.json
{
"registry-mirrors": ["https://registry.docker-cn.com"]
}
[root@localhost ~]#
[root@localhost ~]# systemctl daemon-reload
[root@localhost ~]# systemctl restart docker
2.查询镜像无果?
[root@localhost ~]# docker search kafka
Error response from daemon: Get "https://index.docker.io/v1/search?q=kafka&n=25": x509: certificate has expired or is not yet valid: current time 2023-02-22T02:08:25+08:00 is before 2023-02-22T00:00:00Z
原因:虚拟机时间与外部时间不一致
解决:
[root@localhost ~]# date
2023年 02月 22日 星期三 02:09:50 CST
[root@localhost ~]# ntpdate cn.pool.ntp.org
26 Feb 13:31:38 ntpdate[44996]: step time server 119.28.206.193 offset 386475.634457 sec
[root@localhost ~]# date
2023年 02月 26日 星期日 13:31:48 CST
[root@localhost ~]# docker search kafka
NAME DESCRIPTION STARS OFFICIAL AUTOMATED
bitnami/kafka Apache Kafka is a distributed streaming plat… 615 [OK]
ubuntu/kafka Apache Kafka, a distributed event streaming … 25
bitnami/kafka-exporter 9
ibmcom/kafka Docker Image for IBM Cloud Private-CE (Commu… 6
bitnami/kafka-trigger-controller Source for this controller is in the kubeles… 5
ibmcom/kafka-python-console-sample Docker image for the IBM Event Streams Pytho… 2
openwhisk/kafkaprovider Apache OpenWhisk event provider service for … 2 [OK]
3.Docker容器内如何安装vim?
-
apt-get install vim (可能提示你安装失败!继续往下)
-
agt-get update 同步 /etc/apt/sources.list 和 /etc/apt/sources.list.d 中列出的源的索引
配置国内镜像源:
echo "deb http://mirrors.163.com/debian/ jessie main non-free contrib" >/etc/apt/sources.list echo "deb http://mirrors.163.com/debian/ jessie-proposed-updates main non-free contrib" >>/etc/apt/sources.list echo "deb-src http://mirrors.163.com/debian/ jessie main non-free contrib" >>/etc/apt/sources.list echo "deb-src http://mirrors.163.com/debian/ jessie-proposed-updates main non-free contrib" >>/etc/apt/sources.list
-
返回第一步
4.无法启动kafka?
kafka.common.KafkaException: Socket server failed to bind to 150.158.16.123:9092: 无法指定被请求的地址.
at kafka.network.Acceptor.openServerSocket(SocketServer.scala:327)
at kafka.network.Acceptor.<init>(SocketServer.scala:252)
at kafka.network.SocketServer$$anonfun$startup$1.apply(SocketServer.scala:91)
at kafka.network.SocketServer$$anonfun$startup$1.apply(SocketServer.scala:83)
at scala.collection.mutable.ResizableArray$class.foreach(ResizableArray.scala:59)
at scala.collection.mutable.ArrayBuffer.foreach(ArrayBuffer.scala:48)
at kafka.network.SocketServer.startup(SocketServer.scala:83)
at kafka.server.KafkaServer.startup(KafkaServer.scala:222)
at kafka.server.KafkaServerStartable.startup(KafkaServerStartable.scala:38)
at kafka.Kafka$.main(Kafka.scala:65)
at kafka.Kafka.main(Kafka.scala)
注意,上面是配置里面有个地址写得不对,listeners=PLAINTEXT://10.20.30.153:9092后接的是内网地址,通过ip addr即可查看,如我的机器
一个写内网地址,一个写外网地址即可
文章来源:https://www.toymoban.com/news/detail-768674.html
本次分享到这,下期见!文章来源地址https://www.toymoban.com/news/detail-768674.html
到了这里,关于kafka使用入门案例与踩坑记录的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!