微信小程序(五)地图

这篇具有很好参考价值的文章主要介绍了微信小程序(五)地图。希望对大家有所帮助。如果存在错误或未考虑完全的地方,请大家不吝赐教,您也可以点击"举报违法"按钮提交疑问。

一、引言

        作者开发《目的地到了》需要满足用户选取地址作为目的地的需求,所以需要使用到地图。作者用的是腾讯地图,这里介绍下技术实现。

二、引包

        引入腾讯地图的组件包微信小程序JavaScript SDK | 腾讯位置服务,根据经纬度调用里面的api才能获取周围的地图数据展示

        目录结构是这样的

微信小程序(五)地图,微信小程序,微信小程序,notepad++,小程序,开源

 文章来源地址https://www.toymoban.com/news/detail-772271.html

/**
 * 微信小程序JavaScriptSDK
 */

var ERROR_CONF = {
    KEY_ERR: 311,
    KEY_ERR_MSG: 'key格式错误',
    PARAM_ERR: 310,
    PARAM_ERR_MSG: '请求参数信息有误',
    SYSTEM_ERR: 600,
    SYSTEM_ERR_MSG: '系统错误',
    WX_ERR_CODE: 1000,
    WX_OK_CODE: 200
};
var BASE_URL = 'https://apis.map.qq.com/ws/';
var URL_SEARCH = BASE_URL + 'place/v1/search';
var URL_SUGGESTION = BASE_URL + 'place/v1/suggestion';
var URL_GET_GEOCODER = BASE_URL + 'geocoder/v1/';
var URL_CITY_LIST = BASE_URL + 'district/v1/list';
var URL_AREA_LIST = BASE_URL + 'district/v1/getchildren';
var URL_DISTANCE = BASE_URL + 'distance/v1/';
var URL_DIRECTION = BASE_URL + 'direction/v1/';
var MODE = {
  driving: 'driving',
  transit: 'transit'
};
var EARTH_RADIUS = 6378136.49;
var Utils = {
  /**
  * md5加密方法
  * 版权所有©2011 Sebastian Tschan,https://blueimp.net
  */
  safeAdd(x, y) {
    var lsw = (x & 0xffff) + (y & 0xffff);
    var msw = (x >> 16) + (y >> 16) + (lsw >> 16);
    return (msw << 16) | (lsw & 0xffff);
  },
  bitRotateLeft(num, cnt) {
    return (num << cnt) | (num >>> (32 - cnt));
  },
  md5cmn(q, a, b, x, s, t) {
    return this.safeAdd(this.bitRotateLeft(this.safeAdd(this.safeAdd(a, q), this.safeAdd(x, t)), s), b);
  },
  md5ff(a, b, c, d, x, s, t) {
    return this.md5cmn((b & c) | (~b & d), a, b, x, s, t);
  },
  md5gg(a, b, c, d, x, s, t) {
    return this.md5cmn((b & d) | (c & ~d), a, b, x, s, t);
  },
  md5hh(a, b, c, d, x, s, t) {
    return this.md5cmn(b ^ c ^ d, a, b, x, s, t);
  },
  md5ii(a, b, c, d, x, s, t) {
    return this.md5cmn(c ^ (b | ~d), a, b, x, s, t);
  },
  binlMD5(x, len) {
    /* append padding */
    x[len >> 5] |= 0x80 << (len % 32);
    x[((len + 64) >>> 9 << 4) + 14] = len;

    var i;
    var olda;
    var oldb;
    var oldc;
    var oldd;
    var a = 1732584193;
    var b = -271733879;
    var c = -1732584194;
    var d = 271733878;

    for (i = 0; i < x.length; i += 16) {
      olda = a;
      oldb = b;
      oldc = c;
      oldd = d;

      a = this.md5ff(a, b, c, d, x[i], 7, -680876936);
      d = this.md5ff(d, a, b, c, x[i + 1], 12, -389564586);
      c = this.md5ff(c, d, a, b, x[i + 2], 17, 606105819);
      b = this.md5ff(b, c, d, a, x[i + 3], 22, -1044525330);
      a = this.md5ff(a, b, c, d, x[i + 4], 7, -176418897);
      d = this.md5ff(d, a, b, c, x[i + 5], 12, 1200080426);
      c = this.md5ff(c, d, a, b, x[i + 6], 17, -1473231341);
      b = this.md5ff(b, c, d, a, x[i + 7], 22, -45705983);
      a = this.md5ff(a, b, c, d, x[i + 8], 7, 1770035416);
      d = this.md5ff(d, a, b, c, x[i + 9], 12, -1958414417);
      c = this.md5ff(c, d, a, b, x[i + 10], 17, -42063);
      b = this.md5ff(b, c, d, a, x[i + 11], 22, -1990404162);
      a = this.md5ff(a, b, c, d, x[i + 12], 7, 1804603682);
      d = this.md5ff(d, a, b, c, x[i + 13], 12, -40341101);
      c = this.md5ff(c, d, a, b, x[i + 14], 17, -1502002290);
      b = this.md5ff(b, c, d, a, x[i + 15], 22, 1236535329);

      a = this.md5gg(a, b, c, d, x[i + 1], 5, -165796510);
      d = this.md5gg(d, a, b, c, x[i + 6], 9, -1069501632);
      c = this.md5gg(c, d, a, b, x[i + 11], 14, 643717713);
      b = this.md5gg(b, c, d, a, x[i], 20, -373897302);
      a = this.md5gg(a, b, c, d, x[i + 5], 5, -701558691);
      d = this.md5gg(d, a, b, c, x[i + 10], 9, 38016083);
      c = this.md5gg(c, d, a, b, x[i + 15], 14, -660478335);
      b = this.md5gg(b, c, d, a, x[i + 4], 20, -405537848);
      a = this.md5gg(a, b, c, d, x[i + 9], 5, 568446438);
      d = this.md5gg(d, a, b, c, x[i + 14], 9, -1019803690);
      c = this.md5gg(c, d, a, b, x[i + 3], 14, -187363961);
      b = this.md5gg(b, c, d, a, x[i + 8], 20, 1163531501);
      a = this.md5gg(a, b, c, d, x[i + 13], 5, -1444681467);
      d = this.md5gg(d, a, b, c, x[i + 2], 9, -51403784);
      c = this.md5gg(c, d, a, b, x[i + 7], 14, 1735328473);
      b = this.md5gg(b, c, d, a, x[i + 12], 20, -1926607734);

      a = this.md5hh(a, b, c, d, x[i + 5], 4, -378558);
      d = this.md5hh(d, a, b, c, x[i + 8], 11, -2022574463);
      c = this.md5hh(c, d, a, b, x[i + 11], 16, 1839030562);
      b = this.md5hh(b, c, d, a, x[i + 14], 23, -35309556);
      a = this.md5hh(a, b, c, d, x[i + 1], 4, -1530992060);
      d = this.md5hh(d, a, b, c, x[i + 4], 11, 1272893353);
      c = this.md5hh(c, d, a, b, x[i + 7], 16, -155497632);
      b = this.md5hh(b, c, d, a, x[i + 10], 23, -1094730640);
      a = this.md5hh(a, b, c, d, x[i + 13], 4, 681279174);
      d = this.md5hh(d, a, b, c, x[i], 11, -358537222);
      c = this.md5hh(c, d, a, b, x[i + 3], 16, -722521979);
      b = this.md5hh(b, c, d, a, x[i + 6], 23, 76029189);
      a = this.md5hh(a, b, c, d, x[i + 9], 4, -640364487);
      d = this.md5hh(d, a, b, c, x[i + 12], 11, -421815835);
      c = this.md5hh(c, d, a, b, x[i + 15], 16, 530742520);
      b = this.md5hh(b, c, d, a, x[i + 2], 23, -995338651);

      a = this.md5ii(a, b, c, d, x[i], 6, -198630844);
      d = this.md5ii(d, a, b, c, x[i + 7], 10, 1126891415);
      c = this.md5ii(c, d, a, b, x[i + 14], 15, -1416354905);
      b = this.md5ii(b, c, d, a, x[i + 5], 21, -57434055);
      a = this.md5ii(a, b, c, d, x[i + 12], 6, 1700485571);
      d = this.md5ii(d, a, b, c, x[i + 3], 10, -1894986606);
      c = this.md5ii(c, d, a, b, x[i + 10], 15, -1051523);
      b = this.md5ii(b, c, d, a, x[i + 1], 21, -2054922799);
      a = this.md5ii(a, b, c, d, x[i + 8], 6, 1873313359);
      d = this.md5ii(d, a, b, c, x[i + 15], 10, -30611744);
      c = this.md5ii(c, d, a, b, x[i + 6], 15, -1560198380);
      b = this.md5ii(b, c, d, a, x[i + 13], 21, 1309151649);
      a = this.md5ii(a, b, c, d, x[i + 4], 6, -145523070);
      d = this.md5ii(d, a, b, c, x[i + 11], 10, -1120210379);
      c = this.md5ii(c, d, a, b, x[i + 2], 15, 718787259);
      b = this.md5ii(b, c, d, a, x[i + 9], 21, -343485551);

      a = this.safeAdd(a, olda);
      b = this.safeAdd(b, oldb);
      c = this.safeAdd(c, oldc);
      d = this.safeAdd(d, oldd);
    }
    return [a, b, c, d];
  },
  binl2rstr(input) {
    var i;
    var output = '';
    var length32 = input.length * 32;
    for (i = 0; i < length32; i += 8) {
      output += String.fromCharCode((input[i >> 5] >>> (i % 32)) & 0xff);
    }
    return output;
  },
  rstr2binl(input) {
    var i;
    var output = [];
    output[(input.length >> 2) - 1] = undefined;
    for (i = 0; i < output.length; i += 1) {
      output[i] = 0;
    }
    var length8 = input.length * 8;
    for (i = 0; i < length8; i += 8) {
      output[i >> 5] |= (input.charCodeAt(i / 8) & 0xff) << (i % 32);
    }
    return output;
  },
  rstrMD5(s) {
    return this.binl2rstr(this.binlMD5(this.rstr2binl(s), s.length * 8));
  },
  rstrHMACMD5(key, data) {
    var i;
    var bkey = this.rstr2binl(key);
    var ipad = [];
    var opad = [];
    var hash;
    ipad[15] = opad[15] = undefined;
    if (bkey.length > 16) {
      bkey = this.binlMD5(bkey, key.length * 8);
    }
    for (i = 0; i < 16; i += 1) {
      ipad[i] = bkey[i] ^ 0x36363636;
      opad[i] = bkey[i] ^ 0x5c5c5c5c;
    }
    hash = this.binlMD5(ipad.concat(this.rstr2binl(data)), 512 + data.length * 8);
    return this.binl2rstr(this.binlMD5(opad.concat(hash), 512 + 128));
  },
  rstr2hex(input) {
    var hexTab = '0123456789abcdef';
    var output = '';
    var x;
    var i;
    for (i = 0; i < input.length; i += 1) {
      x = input.charCodeAt(i);
      output += hexTab.charAt((x >>> 4) & 0x0f) + hexTab.charAt(x & 0x0f);
    }
    return output;
  },
  str2rstrUTF8(input) {
    return unescape(encodeURIComponent(input));
  },
  rawMD5(s) {
    return this.rstrMD5(this.str2rstrUTF8(s));
  },
  hexMD5(s) {
    return this.rstr2hex(this.rawMD5(s));
  },
  rawHMACMD5(k, d) {
    return this.rstrHMACMD5(this.str2rstrUTF8(k), str2rstrUTF8(d));
  },
  hexHMACMD5(k, d) {
    return this.rstr2hex(this.rawHMACMD5(k, d));
  },

  md5(string, key, raw) {
    if (!key) {
      if (!raw) {
        return this.hexMD5(string);
      }
      return this.rawMD5(string);
    }
    if (!raw) {
      return this.hexHMACMD5(key, string);
    }
    return this.rawHMACMD5(key, string);
  },
  /**
   * 得到md5加密后的sig参数
   * @param {Object} requestParam 接口参数
   * @param {String} sk签名字符串
   * @param {String} featrue 方法名
   * @return 返回加密后的sig参数
   */
  getSig(requestParam, sk, feature, mode) {
    var sig = null;
    var requestArr = [];
    Object.keys(requestParam).sort().forEach(function(key){
      requestArr.push(key + '=' + requestParam[key]);
    });
    if (feature == 'search') {
      sig = '/ws/place/v1/search?' + requestArr.join('&') + sk;
    }
    if (feature == 'suggest') {
      sig = '/ws/place/v1/suggestion?' + requestArr.join('&') + sk;
    }
    if (feature == 'reverseGeocoder') {
      sig = '/ws/geocoder/v1/?' + requestArr.join('&') + sk;
    }
    if (feature == 'geocoder') {
      sig = '/ws/geocoder/v1/?' + requestArr.join('&') + sk;
    }
    if (feature == 'getCityList') {
      sig = '/ws/district/v1/list?' + requestArr.join('&') + sk;
    }
    if (feature == 'getDistrictByCityId') {
      sig = '/ws/district/v1/getchildren?' + requestArr.join('&') + sk;
    }
    if (feature == 'calculateDistance') {
      sig = '/ws/distance/v1/?' + requestArr.join('&') + sk;
    }
    if (feature == 'direction') {
      sig = '/ws/direction/v1/' + mode + '?' + requestArr.join('&') + sk;
    }
    sig = this.md5(sig);
    return sig;
  },
    /**
     * 得到终点query字符串
     * @param {Array|String} 检索数据
     */
    location2query(data) {
        if (typeof data == 'string') {
            return data;
        }
        var query = '';
        for (var i = 0; i < data.length; i++) {
            var d = data[i];
            if (!!query) {
                query += ';';
            }
            if (d.location) {
                query = query + d.location.lat + ',' + d.location.lng;
            }
            if (d.latitude && d.longitude) {
                query = query + d.latitude + ',' + d.longitude;
            }
        }
        return query;
    },

    /**
     * 计算角度
     */
    rad(d) {
      return d * Math.PI / 180.0;
    },  
    /**
     * 处理终点location数组
     * @return 返回终点数组
     */
    getEndLocation(location){
      var to = location.split(';');
      var endLocation = [];
      for (var i = 0; i < to.length; i++) {
        endLocation.push({
          lat: parseFloat(to[i].split(',')[0]),
          lng: parseFloat(to[i].split(',')[1])
        })
      }
      return endLocation;
    },

    /**
     * 计算两点间直线距离
     * @param a 表示纬度差
     * @param b 表示经度差
     * @return 返回的是距离,单位m
     */
    getDistance(latFrom, lngFrom, latTo, lngTo) {
      var radLatFrom = this.rad(latFrom);
      var radLatTo = this.rad(latTo);
      var a = radLatFrom - radLatTo;
      var b = this.rad(lngFrom) - this.rad(lngTo);
      var distance = 2 * Math.asin(Math.sqrt(Math.pow(Math.sin(a / 2), 2) + Math.cos(radLatFrom) * Math.cos(radLatTo) * Math.pow(Math.sin(b / 2), 2)));
      distance = distance * EARTH_RADIUS;
      distance = Math.round(distance * 10000) / 10000;
      return parseFloat(distance.toFixed(0));
    },
    /**
     * 使用微信接口进行定位
     */
    getWXLocation(success, fail, complete) {
        wx.getLocation({
            type: 'gcj02',
            success: success,
            fail: fail,
            complete: complete
        });
    },

    /**
     * 获取location参数
     */
    getLocationParam(location) {
        if (typeof location == 'string') {
            var locationArr = location.split(',');
            if (locationArr.length === 2) {
                location = {
                    latitude: location.split(',')[0],
                    longitude: location.split(',')[1]
                };
            } else {
                location = {};
            }
        }
        return location;
    },

    /**
     * 回调函数默认处理
     */
    polyfillParam(param) {
        param.success = param.success || function () { };
        param.fail = param.fail || function () { };
        param.complete = param.complete || function () { };
    },

    /**
     * 验证param对应的key值是否为空
     * 
     * @param {Object} param 接口参数
     * @param {String} key 对应参数的key
     */
    checkParamKeyEmpty(param, key) {
        if (!param[key]) {
            var errconf = this.buildErrorConfig(ERROR_CONF.PARAM_ERR, ERROR_CONF.PARAM_ERR_MSG + key +'参数格式有误');
            param.fail(errconf);
            param.complete(errconf);
            return true;
        }
        return false;
    },

    /**
     * 验证参数中是否存在检索词keyword
     * 
     * @param {Object} param 接口参数
     */
    checkKeyword(param){
        return !this.checkParamKeyEmpty(param, 'keyword');
    },

    /**
     * 验证location值
     * 
     * @param {Object} param 接口参数
     */
    checkLocation(param) {
        var location = this.getLocationParam(param.location);
        if (!location || !location.latitude || !location.longitude) {
            var errconf = this.buildErrorConfig(ERROR_CONF.PARAM_ERR, ERROR_CONF.PARAM_ERR_MSG + ' location参数格式有误');
            param.fail(errconf);
            param.complete(errconf);
            return false;
        }
        return true;
    },

    /**
     * 构造错误数据结构
     * @param {Number} errCode 错误码
     * @param {Number} errMsg 错误描述
     */
    buildErrorConfig(errCode, errMsg) {
        return {
            status: errCode,
            message: errMsg
        };
    },

    /**
     * 
     * 数据处理函数
     * 根据传入参数不同处理不同数据
     * @param {String} feature 功能名称
     * search 地点搜索
     * suggest关键词提示
     * reverseGeocoder逆地址解析
     * geocoder地址解析
     * getCityList获取城市列表:父集
     * getDistrictByCityId获取区县列表:子集
     * calculateDistance距离计算
     * @param {Object} param 接口参数
     * @param {Object} data 数据
     */
    handleData(param,data,feature){
      if (feature == 'search') {
        var searchResult = data.data;
        var searchSimplify = [];
        for (var i = 0; i < searchResult.length; i++) {
          searchSimplify.push({
            id: searchResult[i].id || null,
            title: searchResult[i].title || null,
            latitude: searchResult[i].location && searchResult[i].location.lat || null,
            longitude: searchResult[i].location && searchResult[i].location.lng || null,
            address: searchResult[i].address || null,
            category: searchResult[i].category || null,
            tel: searchResult[i].tel || null,
            adcode: searchResult[i].ad_info && searchResult[i].ad_info.adcode || null,
            city: searchResult[i].ad_info && searchResult[i].ad_info.city || null,
            district: searchResult[i].ad_info && searchResult[i].ad_info.district || null,
            province: searchResult[i].ad_info && searchResult[i].ad_info.province || null
          })
        }
        param.success(data, {
          searchResult: searchResult,
          searchSimplify: searchSimplify
        })
      } else if (feature == 'suggest') {
        var suggestResult = data.data;
        var suggestSimplify = [];
        for (var i = 0; i < suggestResult.length; i++) {
          suggestSimplify.push({
            adcode: suggestResult[i].adcode || null,
            address: suggestResult[i].address || null,
            category: suggestResult[i].category || null,
            city: suggestResult[i].city || null,
            district: suggestResult[i].district || null,
            id: suggestResult[i].id || null,
            latitude: suggestResult[i].location && suggestResult[i].location.lat || null,
            longitude: suggestResult[i].location && suggestResult[i].location.lng || null,
            province: suggestResult[i].province || null,
            title: suggestResult[i].title || null,
            type: suggestResult[i].type || null
          })
        }
        param.success(data, {
          suggestResult: suggestResult,
          suggestSimplify: suggestSimplify
          })
      } else if (feature == 'reverseGeocoder') {
        var reverseGeocoderResult = data.result;
        var reverseGeocoderSimplify = {
          address: reverseGeocoderResult.address || null,
          latitude: reverseGeocoderResult.location && reverseGeocoderResult.location.lat || null,
          longitude: reverseGeocoderResult.location && reverseGeocoderResult.location.lng || null,
          adcode: reverseGeocoderResult.ad_info && reverseGeocoderResult.ad_info.adcode || null,
          city: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.city || null,
          district: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.district || null,
          nation: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.nation || null,
          province: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.province || null,
          street: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.street || null,
          street_number: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.street_number || null,
          recommend: reverseGeocoderResult.formatted_addresses && reverseGeocoderResult.formatted_addresses.recommend || null,
          rough: reverseGeocoderResult.formatted_addresses && reverseGeocoderResult.formatted_addresses.rough || null
        };
        if (reverseGeocoderResult.pois) {//判断是否返回周边poi
          var pois = reverseGeocoderResult.pois;
          var poisSimplify = [];
          for (var i = 0;i < pois.length;i++) {
            poisSimplify.push({
              id: pois[i].id || null,
              title: pois[i].title || null,
              latitude: pois[i].location && pois[i].location.lat || null,
              longitude: pois[i].location && pois[i].location.lng || null,
              address: pois[i].address || null,
              category: pois[i].category || null,
              adcode: pois[i].ad_info && pois[i].ad_info.adcode || null,
              city: pois[i].ad_info && pois[i].ad_info.city || null,
              district: pois[i].ad_info && pois[i].ad_info.district || null,
              province: pois[i].ad_info && pois[i].ad_info.province || null
            })
          }
          param.success(data,{
            reverseGeocoderResult: reverseGeocoderResult,
            reverseGeocoderSimplify: reverseGeocoderSimplify,
            pois: pois,
            poisSimplify: poisSimplify
          })
        } else {
          param.success(data, {
            reverseGeocoderResult: reverseGeocoderResult,
            reverseGeocoderSimplify: reverseGeocoderSimplify
          })
        }
      } else if (feature == 'geocoder') {
        var geocoderResult = data.result;
        var geocoderSimplify = {
          title: geocoderResult.title || null,
          latitude: geocoderResult.location && geocoderResult.location.lat || null,
          longitude: geocoderResult.location && geocoderResult.location.lng || null,
          adcode: geocoderResult.ad_info && geocoderResult.ad_info.adcode || null,
          province: geocoderResult.address_components && geocoderResult.address_components.province || null,
          city: geocoderResult.address_components && geocoderResult.address_components.city || null,
          district: geocoderResult.address_components && geocoderResult.address_components.district || null,
          street: geocoderResult.address_components && geocoderResult.address_components.street || null,
          street_number: geocoderResult.address_components && geocoderResult.address_components.street_number || null,
          level: geocoderResult.level || null
        };
        param.success(data,{
          geocoderResult: geocoderResult,
          geocoderSimplify: geocoderSimplify
        });
      } else if (feature == 'getCityList') {
        var provinceResult = data.result[0];
        var cityResult = data.result[1];
        var districtResult = data.result[2];
        param.success(data,{
          provinceResult: provinceResult,
          cityResult: cityResult,
          districtResult: districtResult
        });
      } else if (feature == 'getDistrictByCityId') {
        var districtByCity = data.result[0];
        param.success(data, districtByCity);
      } else if (feature == 'calculateDistance') {
        var calculateDistanceResult = data.result.elements;  
        var distance = [];
        for (var i = 0; i < calculateDistanceResult.length; i++){
          distance.push(calculateDistanceResult[i].distance);
        }   
        param.success(data, {
          calculateDistanceResult: calculateDistanceResult,
          distance: distance
          });
      } else if (feature == 'direction') {
        var direction = data.result.routes;
        param.success(data,direction);
      } else {
        param.success(data);
      }
    },

    /**
     * 构造微信请求参数,公共属性处理
     * 
     * @param {Object} param 接口参数
     * @param {Object} param 配置项
     * @param {String} feature 方法名
     */
    buildWxRequestConfig(param, options, feature) {
        var that = this;
        options.header = { "content-type": "application/json" };
        options.method = 'GET';
        options.success = function (res) {
            var data = res.data;
            if (data.status === 0) {
              that.handleData(param, data, feature);
            } else {
                param.fail(data);
            }
        };
        options.fail = function (res) {
            res.statusCode = ERROR_CONF.WX_ERR_CODE;
            param.fail(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg));
        };
        options.complete = function (res) {
            var statusCode = +res.statusCode;
            switch(statusCode) {
                case ERROR_CONF.WX_ERR_CODE: {
                    param.complete(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg));
                    break;
                }
                case ERROR_CONF.WX_OK_CODE: {
                    var data = res.data;
                    if (data.status === 0) {
                        param.complete(data);
                    } else {
                        param.complete(that.buildErrorConfig(data.status, data.message));
                    }
                    break;
                }
                default:{
                    param.complete(that.buildErrorConfig(ERROR_CONF.SYSTEM_ERR, ERROR_CONF.SYSTEM_ERR_MSG));
                }

            }
        };
        return options;
    },

    /**
     * 处理用户参数是否传入坐标进行不同的处理
     */
    locationProcess(param, locationsuccess, locationfail, locationcomplete) {
        var that = this;
        locationfail = locationfail || function (res) {
            res.statusCode = ERROR_CONF.WX_ERR_CODE;
            param.fail(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg));
        };
        locationcomplete = locationcomplete || function (res) {
            if (res.statusCode == ERROR_CONF.WX_ERR_CODE) {
                param.complete(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg));
            }
        };
        if (!param.location) {
            that.getWXLocation(locationsuccess, locationfail, locationcomplete);
        } else if (that.checkLocation(param)) {
            var location = Utils.getLocationParam(param.location);
            locationsuccess(location);
        }
    }
};


class QQMapWX {

    /**
     * 构造函数
     * 
     * @param {Object} options 接口参数,key 为必选参数
     */
    constructor(options) {
        if (!options.key) {
            throw Error('key值不能为空');
        }
        this.key = options.key;
    };

    /**
     * POI周边检索
     *
     * @param {Object} options 接口参数对象
     * 
     * 参数对象结构可以参考
     * @see http://lbs.qq.com/webservice_v1/guide-search.html
     */
    search(options) {
        var that = this;
        options = options || {};

        Utils.polyfillParam(options);

        if (!Utils.checkKeyword(options)) {
            return;
        }

        var requestParam = {
            keyword: options.keyword,
            orderby: options.orderby || '_distance',
            page_size: options.page_size || 10,
            page_index: options.page_index || 1,
            output: 'json',
            key: that.key
        };

        if (options.address_format) {
            requestParam.address_format = options.address_format;
        }

        if (options.filter) {
            requestParam.filter = options.filter;
        }

        var distance = options.distance || "1000";
        var auto_extend = options.auto_extend || 1;
        var region = null;
        var rectangle = null;

        //判断城市限定参数
        if (options.region) {
          region = options.region;
        }

        //矩形限定坐标(暂时只支持字符串格式)
        if (options.rectangle) {
          rectangle = options.rectangle;
        }

        var locationsuccess = function (result) {        
          if (region && !rectangle) {
            //城市限定参数拼接
            requestParam.boundary = "region(" + region + "," + auto_extend + "," + result.latitude + "," + result.longitude + ")";
            if (options.sig) {
              requestParam.sig = Utils.getSig(requestParam, options.sig, 'search');
            }
          } else if (rectangle && !region) {
            //矩形搜索
            requestParam.boundary = "rectangle(" + rectangle + ")";
            if (options.sig) {
              requestParam.sig = Utils.getSig(requestParam, options.sig, 'search');
            }
            } else {
              requestParam.boundary = "nearby(" + result.latitude + "," + result.longitude + "," + distance + "," + auto_extend + ")";
            if (options.sig) {
              requestParam.sig = Utils.getSig(requestParam, options.sig, 'search');
            }
            }            
            wx.request(Utils.buildWxRequestConfig(options, {
                url: URL_SEARCH,
                data: requestParam
            }, 'search'));
        };
        Utils.locationProcess(options, locationsuccess);
    };

    /**
     * sug模糊检索
     *
     * @param {Object} options 接口参数对象
     * 
     * 参数对象结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-suggestion.html
     */
    getSuggestion(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);

        if (!Utils.checkKeyword(options)) {
            return;
        }

        var requestParam = {
            keyword: options.keyword,
            region: options.region || '全国',
            region_fix: options.region_fix || 0,
            policy: options.policy || 0,
            page_size: options.page_size || 10,//控制显示条数
            page_index: options.page_index || 1,//控制页数
            get_subpois : options.get_subpois || 0,//返回子地点
            output: 'json',
            key: that.key
        };
        //长地址
        if (options.address_format) {
          requestParam.address_format = options.address_format;
        }
        //过滤
        if (options.filter) {
          requestParam.filter = options.filter;
        }
        //排序
        if (options.location) {
          var locationsuccess = function (result) {
            requestParam.location = result.latitude + ',' + result.longitude;
            if (options.sig) {
              requestParam.sig = Utils.getSig(requestParam, options.sig, 'suggest');
            }
            wx.request(Utils.buildWxRequestConfig(options, {
              url: URL_SUGGESTION,
              data: requestParam
            }, "suggest"));      
          };
          Utils.locationProcess(options, locationsuccess);
        } else {
          if (options.sig) {
            requestParam.sig = Utils.getSig(requestParam, options.sig, 'suggest');
          }
          wx.request(Utils.buildWxRequestConfig(options, {
            url: URL_SUGGESTION,
            data: requestParam
          }, "suggest"));      
        }        
    };

    /**
     * 逆地址解析
     *
     * @param {Object} options 接口参数对象
     * 
     * 请求参数结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-gcoder.html
     */
    reverseGeocoder(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);
        var requestParam = {
            coord_type: options.coord_type || 5,
            get_poi: options.get_poi || 0,
            output: 'json',
            key: that.key
        };
        if (options.poi_options) {
            requestParam.poi_options = options.poi_options
        }

        var locationsuccess = function (result) {
            requestParam.location = result.latitude + ',' + result.longitude;
          if (options.sig) {
            requestParam.sig = Utils.getSig(requestParam, options.sig, 'reverseGeocoder');
          }
            wx.request(Utils.buildWxRequestConfig(options, {
                url: URL_GET_GEOCODER,
                data: requestParam
            }, 'reverseGeocoder'));
        };
        Utils.locationProcess(options, locationsuccess);
    };

    /**
     * 地址解析
     *
     * @param {Object} options 接口参数对象
     * 
     * 请求参数结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-geocoder.html
     */
    geocoder(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);

        if (Utils.checkParamKeyEmpty(options, 'address')) {
            return;
        }

        var requestParam = {
            address: options.address,
            output: 'json',
            key: that.key
        };

        //城市限定
        if (options.region) {
          requestParam.region = options.region;
        }

        if (options.sig) {
          requestParam.sig = Utils.getSig(requestParam, options.sig, 'geocoder');
        }

        wx.request(Utils.buildWxRequestConfig(options, {
            url: URL_GET_GEOCODER,
            data: requestParam
        },'geocoder'));
    };


    /**
     * 获取城市列表
     *
     * @param {Object} options 接口参数对象
     * 
     * 请求参数结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-region.html
     */
    getCityList(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);
        var requestParam = {
            output: 'json',
            key: that.key
        };

        if (options.sig) {
          requestParam.sig = Utils.getSig(requestParam, options.sig, 'getCityList');
        }

        wx.request(Utils.buildWxRequestConfig(options, {
            url: URL_CITY_LIST,
            data: requestParam
        },'getCityList'));
    };

    /**
     * 获取对应城市ID的区县列表
     *
     * @param {Object} options 接口参数对象
     * 
     * 请求参数结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-region.html
     */
    getDistrictByCityId(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);

        if (Utils.checkParamKeyEmpty(options, 'id')) {
            return;
        }

        var requestParam = {
            id: options.id || '',
            output: 'json',
            key: that.key
        };

        if (options.sig) {
          requestParam.sig = Utils.getSig(requestParam, options.sig, 'getDistrictByCityId');
        }

        wx.request(Utils.buildWxRequestConfig(options, {
            url: URL_AREA_LIST,
            data: requestParam
        },'getDistrictByCityId'));
    };

    /**
     * 用于单起点到多终点的路线距离(非直线距离)计算:
     * 支持两种距离计算方式:步行和驾车。
     * 起点到终点最大限制直线距离10公里。
     *
     * 新增直线距离计算。
     * 
     * @param {Object} options 接口参数对象
     * 
     * 请求参数结构可以参考
     * http://lbs.qq.com/webservice_v1/guide-distance.html
     */
    calculateDistance(options) {
        var that = this;
        options = options || {};
        Utils.polyfillParam(options);

        if (Utils.checkParamKeyEmpty(options, 'to')) {
            return;
        }

        var requestParam = {
            mode: options.mode || 'walking',
            to: Utils.location2query(options.to),
            output: 'json',
            key: that.key
        };

        if (options.from) {
          options.location = options.from;
        }

        //计算直线距离
        if(requestParam.mode == 'straight'){        
          var locationsuccess = function (result) {
            var locationTo = Utils.getEndLocation(requestParam.to);//处理终点坐标
            var data = {
              message:"query ok",
              result:{
                elements:[]
              },
              status:0
            };
            for (var i = 0; i < locationTo.length; i++) {
              data.result.elements.push({//将坐标存入
                distance: Utils.getDistance(result.latitude, result.longitude, locationTo[i].lat, locationTo[i].lng),
                duration:0,
                from:{
                  lat: result.latitude,
                  lng:result.longitude
                },
                to:{
                  lat: locationTo[i].lat,
                  lng: locationTo[i].lng
                }
              });            
            }
            var calculateResult = data.result.elements;
            var distanceResult = [];
            for (var i = 0; i < calculateResult.length; i++) {
              distanceResult.push(calculateResult[i].distance);
            }  
            return options.success(data,{
              calculateResult: calculateResult,
              distanceResult: distanceResult
            });
          };
          
          Utils.locationProcess(options, locationsuccess);
        } else {
          var locationsuccess = function (result) {
            requestParam.from = result.latitude + ',' + result.longitude;
            if (options.sig) {
              requestParam.sig = Utils.getSig(requestParam, options.sig, 'calculateDistance');
            }
            wx.request(Utils.buildWxRequestConfig(options, {
              url: URL_DISTANCE,
              data: requestParam
            },'calculateDistance'));
          };

          Utils.locationProcess(options, locationsuccess);
        }      
    };

  /**
   * 路线规划:
   * 
   * @param {Object} options 接口参数对象
   * 
   * 请求参数结构可以参考
   * https://lbs.qq.com/webservice_v1/guide-road.html
   */
  direction(options) {
    var that = this;
    options = options || {};
    Utils.polyfillParam(options);

    if (Utils.checkParamKeyEmpty(options, 'to')) {
      return;
    }

    var requestParam = {
      output: 'json',
      key: that.key
    };

    //to格式处理
    if (typeof options.to == 'string') {
      requestParam.to = options.to;
    } else {
      requestParam.to = options.to.latitude + ',' + options.to.longitude;
    }
    //初始化局部请求域名
    var SET_URL_DIRECTION = null;
    //设置默认mode属性
    options.mode = options.mode || MODE.driving;

    //设置请求域名
    SET_URL_DIRECTION = URL_DIRECTION + options.mode;

    if (options.from) {
      options.location = options.from;
    }

    if (options.mode == MODE.driving) {
      if (options.from_poi) {
        requestParam.from_poi = options.from_poi;
      }
      if (options.heading) {
        requestParam.heading = options.heading;
      }
      if (options.speed) {
        requestParam.speed = options.speed;
      }
      if (options.accuracy) {
        requestParam.accuracy = options.accuracy;
      }
      if (options.road_type) {
        requestParam.road_type = options.road_type;
      }
      if (options.to_poi) {
        requestParam.to_poi = options.to_poi;
      }
      if (options.from_track) {
        requestParam.from_track = options.from_track;
      }
      if (options.waypoints) {
        requestParam.waypoints = options.waypoints;
      }
      if (options.policy) {
        requestParam.policy = options.policy;
      }
      if (options.plate_number) {
        requestParam.plate_number = options.plate_number;
      }
    }

    if (options.mode == MODE.transit) {
      if (options.departure_time) {
        requestParam.departure_time = options.departure_time;
      }
      if (options.policy) {
        requestParam.policy = options.policy;
      }
    } 

    var locationsuccess = function (result) {
      requestParam.from = result.latitude + ',' + result.longitude;
      if (options.sig) {
        requestParam.sig = Utils.getSig(requestParam, options.sig, 'direction',options.mode);
      }
      wx.request(Utils.buildWxRequestConfig(options, {
        url: SET_URL_DIRECTION,
        data: requestParam
      }, 'direction'));
    };

    Utils.locationProcess(options, locationsuccess);
  }
};

module.exports = QQMapWX;
var ERROR_CONF = { KEY_ERR: 311, KEY_ERR_MSG: 'key格式错误', PARAM_ERR: 310, PARAM_ERR_MSG: '请求参数信息有误', SYSTEM_ERR: 600, SYSTEM_ERR_MSG: '系统错误', WX_ERR_CODE: 1000, WX_OK_CODE: 200 }; var BASE_URL = 'https://apis.map.qq.com/ws/'; var URL_SEARCH = BASE_URL + 'place/v1/search'; var URL_SUGGESTION = BASE_URL + 'place/v1/suggestion'; var URL_GET_GEOCODER = BASE_URL + 'geocoder/v1/'; var URL_CITY_LIST = BASE_URL + 'district/v1/list'; var URL_AREA_LIST = BASE_URL + 'district/v1/getchildren'; var URL_DISTANCE = BASE_URL + 'distance/v1/'; var URL_DIRECTION = BASE_URL + 'direction/v1/'; var MODE = { driving: 'driving', transit: 'transit' }; var EARTH_RADIUS = 6378136.49; var Utils = { safeAdd(x, y) { var lsw = (x & 0xffff) + (y & 0xffff); var msw = (x >> 16) + (y >> 16) + (lsw >> 16); return (msw << 16) | (lsw & 0xffff) }, bitRotateLeft(num, cnt) { return (num << cnt) | (num >>> (32 - cnt)) }, md5cmn(q, a, b, x, s, t) { return this.safeAdd(this.bitRotateLeft(this.safeAdd(this.safeAdd(a, q), this.safeAdd(x, t)), s), b) }, md5ff(a, b, c, d, x, s, t) { return this.md5cmn((b & c) | (~b & d), a, b, x, s, t) }, md5gg(a, b, c, d, x, s, t) { return this.md5cmn((b & d) | (c & ~d), a, b, x, s, t) }, md5hh(a, b, c, d, x, s, t) { return this.md5cmn(b ^ c ^ d, a, b, x, s, t) }, md5ii(a, b, c, d, x, s, t) { return this.md5cmn(c ^ (b | ~d), a, b, x, s, t) }, binlMD5(x, len) { x[len >> 5] |= 0x80 << (len % 32); x[((len + 64) >>> 9 << 4) + 14] = len; var i; var olda; var oldb; var oldc; var oldd; var a = 1732584193; var b = -271733879; var c = -1732584194; var d = 271733878; for (i = 0; i < x.length; i += 16) { olda = a; oldb = b; oldc = c; oldd = d; a = this.md5ff(a, b, c, d, x[i], 7, -680876936); d = this.md5ff(d, a, b, c, x[i + 1], 12, -389564586); c = this.md5ff(c, d, a, b, x[i + 2], 17, 606105819); b = this.md5ff(b, c, d, a, x[i + 3], 22, -1044525330); a = this.md5ff(a, b, c, d, x[i + 4], 7, -176418897); d = this.md5ff(d, a, b, c, x[i + 5], 12, 1200080426); c = this.md5ff(c, d, a, b, x[i + 6], 17, -1473231341); b = this.md5ff(b, c, d, a, x[i + 7], 22, -45705983); a = this.md5ff(a, b, c, d, x[i + 8], 7, 1770035416); d = this.md5ff(d, a, b, c, x[i + 9], 12, -1958414417); c = this.md5ff(c, d, a, b, x[i + 10], 17, -42063); b = this.md5ff(b, c, d, a, x[i + 11], 22, -1990404162); a = this.md5ff(a, b, c, d, x[i + 12], 7, 1804603682); d = this.md5ff(d, a, b, c, x[i + 13], 12, -40341101); c = this.md5ff(c, d, a, b, x[i + 14], 17, -1502002290); b = this.md5ff(b, c, d, a, x[i + 15], 22, 1236535329); a = this.md5gg(a, b, c, d, x[i + 1], 5, -165796510); d = this.md5gg(d, a, b, c, x[i + 6], 9, -1069501632); c = this.md5gg(c, d, a, b, x[i + 11], 14, 643717713); b = this.md5gg(b, c, d, a, x[i], 20, -373897302); a = this.md5gg(a, b, c, d, x[i + 5], 5, -701558691); d = this.md5gg(d, a, b, c, x[i + 10], 9, 38016083); c = this.md5gg(c, d, a, b, x[i + 15], 14, -660478335); b = this.md5gg(b, c, d, a, x[i + 4], 20, -405537848); a = this.md5gg(a, b, c, d, x[i + 9], 5, 568446438); d = this.md5gg(d, a, b, c, x[i + 14], 9, -1019803690); c = this.md5gg(c, d, a, b, x[i + 3], 14, -187363961); b = this.md5gg(b, c, d, a, x[i + 8], 20, 1163531501); a = this.md5gg(a, b, c, d, x[i + 13], 5, -1444681467); d = this.md5gg(d, a, b, c, x[i + 2], 9, -51403784); c = this.md5gg(c, d, a, b, x[i + 7], 14, 1735328473); b = this.md5gg(b, c, d, a, x[i + 12], 20, -1926607734); a = this.md5hh(a, b, c, d, x[i + 5], 4, -378558); d = this.md5hh(d, a, b, c, x[i + 8], 11, -2022574463); c = this.md5hh(c, d, a, b, x[i + 11], 16, 1839030562); b = this.md5hh(b, c, d, a, x[i + 14], 23, -35309556); a = this.md5hh(a, b, c, d, x[i + 1], 4, -1530992060); d = this.md5hh(d, a, b, c, x[i + 4], 11, 1272893353); c = this.md5hh(c, d, a, b, x[i + 7], 16, -155497632); b = this.md5hh(b, c, d, a, x[i + 10], 23, -1094730640); a = this.md5hh(a, b, c, d, x[i + 13], 4, 681279174); d = this.md5hh(d, a, b, c, x[i], 11, -358537222); c = this.md5hh(c, d, a, b, x[i + 3], 16, -722521979); b = this.md5hh(b, c, d, a, x[i + 6], 23, 76029189); a = this.md5hh(a, b, c, d, x[i + 9], 4, -640364487); d = this.md5hh(d, a, b, c, x[i + 12], 11, -421815835); c = this.md5hh(c, d, a, b, x[i + 15], 16, 530742520); b = this.md5hh(b, c, d, a, x[i + 2], 23, -995338651); a = this.md5ii(a, b, c, d, x[i], 6, -198630844); d = this.md5ii(d, a, b, c, x[i + 7], 10, 1126891415); c = this.md5ii(c, d, a, b, x[i + 14], 15, -1416354905); b = this.md5ii(b, c, d, a, x[i + 5], 21, -57434055); a = this.md5ii(a, b, c, d, x[i + 12], 6, 1700485571); d = this.md5ii(d, a, b, c, x[i + 3], 10, -1894986606); c = this.md5ii(c, d, a, b, x[i + 10], 15, -1051523); b = this.md5ii(b, c, d, a, x[i + 1], 21, -2054922799); a = this.md5ii(a, b, c, d, x[i + 8], 6, 1873313359); d = this.md5ii(d, a, b, c, x[i + 15], 10, -30611744); c = this.md5ii(c, d, a, b, x[i + 6], 15, -1560198380); b = this.md5ii(b, c, d, a, x[i + 13], 21, 1309151649); a = this.md5ii(a, b, c, d, x[i + 4], 6, -145523070); d = this.md5ii(d, a, b, c, x[i + 11], 10, -1120210379); c = this.md5ii(c, d, a, b, x[i + 2], 15, 718787259); b = this.md5ii(b, c, d, a, x[i + 9], 21, -343485551); a = this.safeAdd(a, olda); b = this.safeAdd(b, oldb); c = this.safeAdd(c, oldc); d = this.safeAdd(d, oldd) } return [a, b, c, d] }, binl2rstr(input) { var i; var output = ''; var length32 = input.length * 32; for (i = 0; i < length32; i += 8) { output += String.fromCharCode((input[i >> 5] >>> (i % 32)) & 0xff) } return output }, rstr2binl(input) { var i; var output = []; output[(input.length >> 2) - 1] = undefined; for (i = 0; i < output.length; i += 1) { output[i] = 0 } var length8 = input.length * 8; for (i = 0; i < length8; i += 8) { output[i >> 5] |= (input.charCodeAt(i / 8) & 0xff) << (i % 32) } return output }, rstrMD5(s) { return this.binl2rstr(this.binlMD5(this.rstr2binl(s), s.length * 8)) }, rstrHMACMD5(key, data) { var i; var bkey = this.rstr2binl(key); var ipad = []; var opad = []; var hash; ipad[15] = opad[15] = undefined; if (bkey.length > 16) { bkey = this.binlMD5(bkey, key.length * 8) } for (i = 0; i < 16; i += 1) { ipad[i] = bkey[i] ^ 0x36363636; opad[i] = bkey[i] ^ 0x5c5c5c5c } hash = this.binlMD5(ipad.concat(this.rstr2binl(data)), 512 + data.length * 8); return this.binl2rstr(this.binlMD5(opad.concat(hash), 512 + 128)) }, rstr2hex(input) { var hexTab = '0123456789abcdef'; var output = ''; var x; var i; for (i = 0; i < input.length; i += 1) { x = input.charCodeAt(i); output += hexTab.charAt((x >>> 4) & 0x0f) + hexTab.charAt(x & 0x0f) } return output }, str2rstrUTF8(input) { return unescape(encodeURIComponent(input)) }, rawMD5(s) { return this.rstrMD5(this.str2rstrUTF8(s)) }, hexMD5(s) { return this.rstr2hex(this.rawMD5(s)) }, rawHMACMD5(k, d) { return this.rstrHMACMD5(this.str2rstrUTF8(k), str2rstrUTF8(d)) }, hexHMACMD5(k, d) { return this.rstr2hex(this.rawHMACMD5(k, d)) }, md5(string, key, raw) { if (!key) { if (!raw) { return this.hexMD5(string) } return this.rawMD5(string) } if (!raw) { return this.hexHMACMD5(key, string) } return this.rawHMACMD5(key, string) }, getSig(requestParam, sk, feature, mode) { var sig = null; var requestArr = []; Object.keys(requestParam).sort().forEach(function (key) { requestArr.push(key + '=' + requestParam[key]) }); if (feature == 'search') { sig = '/ws/place/v1/search?' + requestArr.join('&') + sk } if (feature == 'suggest') { sig = '/ws/place/v1/suggestion?' + requestArr.join('&') + sk } if (feature == 'reverseGeocoder') { sig = '/ws/geocoder/v1/?' + requestArr.join('&') + sk } if (feature == 'geocoder') { sig = '/ws/geocoder/v1/?' + requestArr.join('&') + sk } if (feature == 'getCityList') { sig = '/ws/district/v1/list?' + requestArr.join('&') + sk } if (feature == 'getDistrictByCityId') { sig = '/ws/district/v1/getchildren?' + requestArr.join('&') + sk } if (feature == 'calculateDistance') { sig = '/ws/distance/v1/?' + requestArr.join('&') + sk } if (feature == 'direction') { sig = '/ws/direction/v1/' + mode + '?' + requestArr.join('&') + sk } sig = this.md5(sig); return sig }, location2query(data) { if (typeof data == 'string') { return data } var query = ''; for (var i = 0; i < data.length; i++) { var d = data[i]; if (!!query) { query += ';' } if (d.location) { query = query + d.location.lat + ',' + d.location.lng } if (d.latitude && d.longitude) { query = query + d.latitude + ',' + d.longitude } } return query }, rad(d) { return d * Math.PI / 180.0 }, getEndLocation(location) { var to = location.split(';'); var endLocation = []; for (var i = 0; i < to.length; i++) { endLocation.push({ lat: parseFloat(to[i].split(',')[0]), lng: parseFloat(to[i].split(',')[1]) }) } return endLocation }, getDistance(latFrom, lngFrom, latTo, lngTo) { var radLatFrom = this.rad(latFrom); var radLatTo = this.rad(latTo); var a = radLatFrom - radLatTo; var b = this.rad(lngFrom) - this.rad(lngTo); var distance = 2 * Math.asin(Math.sqrt(Math.pow(Math.sin(a / 2), 2) + Math.cos(radLatFrom) * Math.cos(radLatTo) * Math.pow(Math.sin(b / 2), 2))); distance = distance * EARTH_RADIUS; distance = Math.round(distance * 10000) / 10000; return parseFloat(distance.toFixed(0)) }, getWXLocation(success, fail, complete) { wx.getLocation({ type: 'gcj02', success: success, fail: fail, complete: complete }) }, getLocationParam(location) { if (typeof location == 'string') { var locationArr = location.split(','); if (locationArr.length === 2) { location = { latitude: location.split(',')[0], longitude: location.split(',')[1] } } else { location = {} } } return location }, polyfillParam(param) { param.success = param.success || function () { }; param.fail = param.fail || function () { }; param.complete = param.complete || function () { } }, checkParamKeyEmpty(param, key) { if (!param[key]) { var errconf = this.buildErrorConfig(ERROR_CONF.PARAM_ERR, ERROR_CONF.PARAM_ERR_MSG + key + '参数格式有误'); param.fail(errconf); param.complete(errconf); return true } return false }, checkKeyword(param) { return !this.checkParamKeyEmpty(param, 'keyword') }, checkLocation(param) { var location = this.getLocationParam(param.location); if (!location || !location.latitude || !location.longitude) { var errconf = this.buildErrorConfig(ERROR_CONF.PARAM_ERR, ERROR_CONF.PARAM_ERR_MSG + ' location参数格式有误'); param.fail(errconf); param.complete(errconf); return false } return true }, buildErrorConfig(errCode, errMsg) { return { status: errCode, message: errMsg } }, handleData(param, data, feature) { if (feature == 'search') { var searchResult = data.data; var searchSimplify = []; for (var i = 0; i < searchResult.length; i++) { searchSimplify.push({ id: searchResult[i].id || null, title: searchResult[i].title || null, latitude: searchResult[i].location && searchResult[i].location.lat || null, longitude: searchResult[i].location && searchResult[i].location.lng || null, address: searchResult[i].address || null, category: searchResult[i].category || null, tel: searchResult[i].tel || null, adcode: searchResult[i].ad_info && searchResult[i].ad_info.adcode || null, city: searchResult[i].ad_info && searchResult[i].ad_info.city || null, district: searchResult[i].ad_info && searchResult[i].ad_info.district || null, province: searchResult[i].ad_info && searchResult[i].ad_info.province || null }) } param.success(data, { searchResult: searchResult, searchSimplify: searchSimplify }) } else if (feature == 'suggest') { var suggestResult = data.data; var suggestSimplify = []; for (var i = 0; i < suggestResult.length; i++) { suggestSimplify.push({ adcode: suggestResult[i].adcode || null, address: suggestResult[i].address || null, category: suggestResult[i].category || null, city: suggestResult[i].city || null, district: suggestResult[i].district || null, id: suggestResult[i].id || null, latitude: suggestResult[i].location && suggestResult[i].location.lat || null, longitude: suggestResult[i].location && suggestResult[i].location.lng || null, province: suggestResult[i].province || null, title: suggestResult[i].title || null, type: suggestResult[i].type || null }) } param.success(data, { suggestResult: suggestResult, suggestSimplify: suggestSimplify }) } else if (feature == 'reverseGeocoder') { var reverseGeocoderResult = data.result; var reverseGeocoderSimplify = { address: reverseGeocoderResult.address || null, latitude: reverseGeocoderResult.location && reverseGeocoderResult.location.lat || null, longitude: reverseGeocoderResult.location && reverseGeocoderResult.location.lng || null, adcode: reverseGeocoderResult.ad_info && reverseGeocoderResult.ad_info.adcode || null, city: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.city || null, district: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.district || null, nation: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.nation || null, province: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.province || null, street: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.street || null, street_number: reverseGeocoderResult.address_component && reverseGeocoderResult.address_component.street_number || null, recommend: reverseGeocoderResult.formatted_addresses && reverseGeocoderResult.formatted_addresses.recommend || null, rough: reverseGeocoderResult.formatted_addresses && reverseGeocoderResult.formatted_addresses.rough || null }; if (reverseGeocoderResult.pois) { var pois = reverseGeocoderResult.pois; var poisSimplify = []; for (var i = 0; i < pois.length; i++) { poisSimplify.push({ id: pois[i].id || null, title: pois[i].title || null, latitude: pois[i].location && pois[i].location.lat || null, longitude: pois[i].location && pois[i].location.lng || null, address: pois[i].address || null, category: pois[i].category || null, adcode: pois[i].ad_info && pois[i].ad_info.adcode || null, city: pois[i].ad_info && pois[i].ad_info.city || null, district: pois[i].ad_info && pois[i].ad_info.district || null, province: pois[i].ad_info && pois[i].ad_info.province || null }) } param.success(data, { reverseGeocoderResult: reverseGeocoderResult, reverseGeocoderSimplify: reverseGeocoderSimplify, pois: pois, poisSimplify: poisSimplify }) } else { param.success(data, { reverseGeocoderResult: reverseGeocoderResult, reverseGeocoderSimplify: reverseGeocoderSimplify }) } } else if (feature == 'geocoder') { var geocoderResult = data.result; var geocoderSimplify = { title: geocoderResult.title || null, latitude: geocoderResult.location && geocoderResult.location.lat || null, longitude: geocoderResult.location && geocoderResult.location.lng || null, adcode: geocoderResult.ad_info && geocoderResult.ad_info.adcode || null, province: geocoderResult.address_components && geocoderResult.address_components.province || null, city: geocoderResult.address_components && geocoderResult.address_components.city || null, district: geocoderResult.address_components && geocoderResult.address_components.district || null, street: geocoderResult.address_components && geocoderResult.address_components.street || null, street_number: geocoderResult.address_components && geocoderResult.address_components.street_number || null, level: geocoderResult.level || null }; param.success(data, { geocoderResult: geocoderResult, geocoderSimplify: geocoderSimplify }) } else if (feature == 'getCityList') { var provinceResult = data.result[0]; var cityResult = data.result[1]; var districtResult = data.result[2]; param.success(data, { provinceResult: provinceResult, cityResult: cityResult, districtResult: districtResult }) } else if (feature == 'getDistrictByCityId') { var districtByCity = data.result[0]; param.success(data, districtByCity) } else if (feature == 'calculateDistance') { var calculateDistanceResult = data.result.elements; var distance = []; for (var i = 0; i < calculateDistanceResult.length; i++) { distance.push(calculateDistanceResult[i].distance) } param.success(data, { calculateDistanceResult: calculateDistanceResult, distance: distance }) } else if (feature == 'direction') { var direction = data.result.routes; param.success(data, direction) } else { param.success(data) } }, buildWxRequestConfig(param, options, feature) { var that = this; options.header = { "content-type": "application/json" }; options.method = 'GET'; options.success = function (res) { var data = res.data; if (data.status === 0) { that.handleData(param, data, feature) } else { param.fail(data) } }; options.fail = function (res) { res.statusCode = ERROR_CONF.WX_ERR_CODE; param.fail(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg)) }; options.complete = function (res) { var statusCode = +res.statusCode; switch (statusCode) { case ERROR_CONF.WX_ERR_CODE: { param.complete(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg)); break } case ERROR_CONF.WX_OK_CODE: { var data = res.data; if (data.status === 0) { param.complete(data) } else { param.complete(that.buildErrorConfig(data.status, data.message)) } break } default: { param.complete(that.buildErrorConfig(ERROR_CONF.SYSTEM_ERR, ERROR_CONF.SYSTEM_ERR_MSG)) } } }; return options }, locationProcess(param, locationsuccess, locationfail, locationcomplete) { var that = this; locationfail = locationfail || function (res) { res.statusCode = ERROR_CONF.WX_ERR_CODE; param.fail(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg)) }; locationcomplete = locationcomplete || function (res) { if (res.statusCode == ERROR_CONF.WX_ERR_CODE) { param.complete(that.buildErrorConfig(ERROR_CONF.WX_ERR_CODE, res.errMsg)) } }; if (!param.location) { that.getWXLocation(locationsuccess, locationfail, locationcomplete) } else if (that.checkLocation(param)) { var location = Utils.getLocationParam(param.location); locationsuccess(location) } } }; class QQMapWX { constructor(options) { if (!options.key) { throw Error('key值不能为空') } this.key = options.key }; search(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (!Utils.checkKeyword(options)) { return } var requestParam = { keyword: options.keyword, orderby: options.orderby || '_distance', page_size: options.page_size || 10, page_index: options.page_index || 1, output: 'json', key: that.key }; if (options.address_format) { requestParam.address_format = options.address_format } if (options.filter) { requestParam.filter = options.filter } var distance = options.distance || "1000"; var auto_extend = options.auto_extend || 1; var region = null; var rectangle = null; if (options.region) { region = options.region } if (options.rectangle) { rectangle = options.rectangle } var locationsuccess = function (result) { if (region && !rectangle) { requestParam.boundary = "region(" + region + "," + auto_extend + "," + result.latitude + "," + result.longitude + ")"; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'search') } } else if (rectangle && !region) { requestParam.boundary = "rectangle(" + rectangle + ")"; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'search') } } else { requestParam.boundary = "nearby(" + result.latitude + "," + result.longitude + "," + distance + "," + auto_extend + ")"; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'search') } } wx.request(Utils.buildWxRequestConfig(options, { url: URL_SEARCH, data: requestParam }, 'search')) }; Utils.locationProcess(options, locationsuccess) }; getSuggestion(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (!Utils.checkKeyword(options)) { return } var requestParam = { keyword: options.keyword, region: options.region || '全国', region_fix: options.region_fix || 0, policy: options.policy || 0, page_size: options.page_size || 10, page_index: options.page_index || 1, get_subpois: options.get_subpois || 0, output: 'json', key: that.key }; if (options.address_format) { requestParam.address_format = options.address_format } if (options.filter) { requestParam.filter = options.filter } if (options.location) { var locationsuccess = function (result) { requestParam.location = result.latitude + ',' + result.longitude; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'suggest') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_SUGGESTION, data: requestParam }, "suggest")) }; Utils.locationProcess(options, locationsuccess) } else { if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'suggest') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_SUGGESTION, data: requestParam }, "suggest")) } }; reverseGeocoder(options) { var that = this; options = options || {}; Utils.polyfillParam(options); var requestParam = { coord_type: options.coord_type || 5, get_poi: options.get_poi || 0, output: 'json', key: that.key }; if (options.poi_options) { requestParam.poi_options = options.poi_options } var locationsuccess = function (result) { requestParam.location = result.latitude + ',' + result.longitude; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'reverseGeocoder') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_GET_GEOCODER, data: requestParam }, 'reverseGeocoder')) }; Utils.locationProcess(options, locationsuccess) }; geocoder(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (Utils.checkParamKeyEmpty(options, 'address')) { return } var requestParam = { address: options.address, output: 'json', key: that.key }; if (options.region) { requestParam.region = options.region } if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'geocoder') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_GET_GEOCODER, data: requestParam }, 'geocoder')) }; getCityList(options) { var that = this; options = options || {}; Utils.polyfillParam(options); var requestParam = { output: 'json', key: that.key }; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'getCityList') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_CITY_LIST, data: requestParam }, 'getCityList')) }; getDistrictByCityId(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (Utils.checkParamKeyEmpty(options, 'id')) { return } var requestParam = { id: options.id || '', output: 'json', key: that.key }; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'getDistrictByCityId') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_AREA_LIST, data: requestParam }, 'getDistrictByCityId')) }; calculateDistance(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (Utils.checkParamKeyEmpty(options, 'to')) { return } var requestParam = { mode: options.mode || 'walking', to: Utils.location2query(options.to), output: 'json', key: that.key }; if (options.from) { options.location = options.from } if (requestParam.mode == 'straight') { var locationsuccess = function (result) { var locationTo = Utils.getEndLocation(requestParam.to); var data = { message: "query ok", result: { elements: [] }, status: 0 }; for (var i = 0; i < locationTo.length; i++) { data.result.elements.push({ distance: Utils.getDistance(result.latitude, result.longitude, locationTo[i].lat, locationTo[i].lng), duration: 0, from: { lat: result.latitude, lng: result.longitude }, to: { lat: locationTo[i].lat, lng: locationTo[i].lng } }) } var calculateResult = data.result.elements; var distanceResult = []; for (var i = 0; i < calculateResult.length; i++) { distanceResult.push(calculateResult[i].distance) } return options.success(data, { calculateResult: calculateResult, distanceResult: distanceResult }) }; Utils.locationProcess(options, locationsuccess) } else { var locationsuccess = function (result) { requestParam.from = result.latitude + ',' + result.longitude; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'calculateDistance') } wx.request(Utils.buildWxRequestConfig(options, { url: URL_DISTANCE, data: requestParam }, 'calculateDistance')) }; Utils.locationProcess(options, locationsuccess) } }; direction(options) { var that = this; options = options || {}; Utils.polyfillParam(options); if (Utils.checkParamKeyEmpty(options, 'to')) { return } var requestParam = { output: 'json', key: that.key }; if (typeof options.to == 'string') { requestParam.to = options.to } else { requestParam.to = options.to.latitude + ',' + options.to.longitude } var SET_URL_DIRECTION = null; options.mode = options.mode || MODE.driving; SET_URL_DIRECTION = URL_DIRECTION + options.mode; if (options.from) { options.location = options.from } if (options.mode == MODE.driving) { if (options.from_poi) { requestParam.from_poi = options.from_poi } if (options.heading) { requestParam.heading = options.heading } if (options.speed) { requestParam.speed = options.speed } if (options.accuracy) { requestParam.accuracy = options.accuracy } if (options.road_type) { requestParam.road_type = options.road_type } if (options.to_poi) { requestParam.to_poi = options.to_poi } if (options.from_track) { requestParam.from_track = options.from_track } if (options.waypoints) { requestParam.waypoints = options.waypoints } if (options.policy) { requestParam.policy = options.policy } if (options.plate_number) { requestParam.plate_number = options.plate_number } } if (options.mode == MODE.transit) { if (options.departure_time) { requestParam.departure_time = options.departure_time } if (options.policy) { requestParam.policy = options.policy } } var locationsuccess = function (result) { requestParam.from = result.latitude + ',' + result.longitude; if (options.sig) { requestParam.sig = Utils.getSig(requestParam, options.sig, 'direction', options.mode) } wx.request(Utils.buildWxRequestConfig(options, { url: SET_URL_DIRECTION, data: requestParam }, 'direction')) }; Utils.locationProcess(options, locationsuccess) } }; module.exports = QQMapWX;

三、地图

1、引入js

var QQMapWX = require('../../../utils/qqmap-wx-jssdk1.2/qqmap-wx-jssdk.min.js');
var qqmapsdk;

2、初始化地图

 关键在于key,是要在腾讯地图进行注册获取的腾讯位置服务 - 立足生态,连接未来

        控制台-应用管理-我的应用中创建应用,并在相应的应用中创建。

        个人注册有限制        

        并发限制:5次/秒/接口/Key

        日调用量:10,000次/接口/Key

微信小程序(五)地图,微信小程序,微信小程序,notepad++,小程序,开源

onLoad: function (options) {
        let self = this;
        self.mapCtx = wx.createMapContext('myMap')
        // 实例化API核心类
        qqmapsdk = new QQMapWX({
            key: '**'
        });
        //定位
        wx.getLocation({
            type: 'gcj02',
            success(res) {
                console.log("当前定位")
                console.log(res)
                const latitude = res.latitude
                const longitude = res.longitude
                //你地址解析
                qqmapsdk.reverseGeocoder({
                    location: {
                        latitude: latitude,
                        longitude: longitude
                    },
                    success: function (res) {
                        console.log("当前定位详细信息")
                        // 调用接口
                        self.nearby_search();
                    },
                    fail(err) {
                        console.log('获取当前定位详细信息失败', err);
                    }
                });
            },
            fail(err) {
                console.log('开启后台定位失败', err);
                })
            }
        })

    },

        nearby_search是根据关键词搜索附近位置

nearby_search: function () {
        var self = this;
        wx.hideLoading();
        wx.showLoading({
            title: '加载中'
        });
        // 调用接口
        qqmapsdk.search({
            keyword: self.data.keyword,
            location: self.data.latitude + ',' + self.data.longitude,
            page_size: 20,
            page_index: 1,
            success: function (res) { //搜索成功后的回调
                //console.log(res.data)
                var sug = [];
                for (var i = 0; i < res.data.length; i++) {
                    sug.push({ // 获取返回结果,放到sug数组中
                        title: res.data[i].title,
                        id: res.data[i].id,
                        addr: res.data[i].address,
                        province: res.data[i].ad_info.province,
                        city: res.data[i].ad_info.city,
                        district: res.data[i].ad_info.district,
                        latitude: res.data[i].location.lat,
                        longitude: res.data[i].location.lng
                    });
                }
                self.setData({
                    selectedId: 0,
                    centerData: sug[0],
                    nearList: sug,
                    suggestion: sug
                })
                self.addMarker(sug[0]);
            },
            fail: function (res) {
                //console.log(res);
            },
            complete: function (res) {
                //console.log(res);
            }
        });
    },

        标记地图具体点位

addMarker: function (data) {
        //console.log(data)
        //console.log(data.title)
        var mks = [];
        mks.push({ // 获取返回结果,放到mks数组中
            title: data.title,
            id: data.id,
            addr: data.addr,
            province: data.province,
            city: data.city,
            district: data.district,
            latitude: data.latitude,
            longitude: data.longitude,
            iconPath: "/images/my_marker.png", //图标路径
            width: 25,
            height: 25
        })
        this.setData({ //设置markers属性,将搜索结果显示在地图中
            markers: mks,
            currentRegion: {
                province: data.province,
                city: data.city,
                district: data.district,
            }
        })
        wx.hideLoading({});
    },

 

3、渲染附近地图

 

<map id="myMap"
                 style="width:100%;height:300px;"
                 longitude="{{longitude}}"
                 latitude="{{latitude}}" scale="17" bindregionchange="mapChange">
                <cover-view class="top">
                    <cover-view class="back" bindtap="back1">
                        <cover-image src="/static/images/detail_back.png"></cover-image>
                    </cover-view>
                    <cover-view class="search-box">
                        <cover-view class="region" bindtap="chooseCity">{{currentRegion.district}}</cover-view>
                        <cover-view class="shu"></cover-view>
                        <cover-view class="placeholder" bindtap="showAddList">请输入地址</cover-view>
                    </cover-view>
                </cover-view>
                <cover-view class="map-prompt">您可拖动地图, 标记准确位置</cover-view>
                <cover-image class="current-site-icon" src="/static/images/my_marker.png"></cover-image>
                <cover-view class="reload" bindtap="reload">
                    <cover-view class="center1">
                        <cover-view class="center2"></cover-view>
                    </cover-view>
                </cover-view>
            </map>

        滑动点位直接就是重新初始化,这样地图就变了        

//重新定位
    reload: function () {
        this.onLoad();
    },

4、搜索地址

<view wx:if="{{addListShow}}">
            <view class="top">
                <view class="back iconfont icon-fanhui" bindtap="back1"></view>
                <view class="search-box {{addListShow?'search-box1':''}}">
                    <view class="region" bindtap="chooseCity">{{currentRegion.district}}</view>
                    <view class="shu"></view>
                    <input class="input-box" bindinput="getSearchLocation" placeholder="请输入目标位置"></input>
                </view>
            </view>
            <!--关键词输入提示列表渲染-->
            <view class="add-list-box">
                <scroll-view class="add-list" scroll-y>
                    <view class="add-item" wx:for="{{suggestion}}" wx:key="index">
                        <!--绑定回填事件-->
                        <view bindtap="backfill" id="{{index}}" data-name="{{item.title}}">
                            <!--根据需求渲染相应数据-->
                            <!--渲染地址title-->
                            <view class="title">{{item.title}}</view>
                            <!--渲染详细地址-->
                            <view class="add">{{item.addr}}</view>
                        </view>
                    </view>
                </scroll-view>
            </view>
        </view>

        获取搜索的位置信息

getSearchLocation: function (e) {
        var _this = this;
        var keyword = e.detail.value;
        _this.setData({
            addListShow: true
        })
        //调用关键词提示接口
        qqmapsdk.getSuggestion({
            //获取输入框值并设置keyword参数
            keyword: keyword, //用户输入的关键词,可设置固定值,如keyword:'KFC'
            location: _this.data.latitude + ',' + _this.data.longitude,
            page_size: 20,
            page_index: 1,
            //region:'北京', //设置城市名,限制关键词所示的地域范围,非必填参数
            success: function (res) {//搜索成功后的回调
                //console.log(res);
                var sug = [];
                for (var i = 0; i < res.data.length; i++) {
                    sug.push({ // 获取返回结果,放到sug数组中
                        title: res.data[i].title,
                        id: res.data[i].id,
                        addr: res.data[i].address,
                        province: res.data[i].province,
                        city: res.data[i].city,
                        district: res.data[i].district,
                        latitude: res.data[i].location.lat,
                        longitude: res.data[i].location.lng
                    });
                }
                _this.setData({ 
                    suggestion: sug,
                    nearList: sug,
                    keyword: keyword
                });
            },
            fail: function (error) {
                //console.error(error);
            },
            complete: function (res) {
                //console.log(res);
            }
        });
    },

四、效果

        

微信小程序(五)地图,微信小程序,微信小程序,notepad++,小程序,开源

 五、总结

        这一期讲的东西有点多了,主要是地图的初始化和定位展示、搜索,还有选择城市、确定位置这些放在下一期。有需要的同学可以关注微信公众号:胖当当技术,合作者交流。

 

到了这里,关于微信小程序(五)地图的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处: 如若内容造成侵权/违法违规/事实不符,请点击违法举报进行投诉反馈,一经查实,立即删除!

领支付宝红包 赞助服务器费用

相关文章

  • 微信小程序引入地图

    微信小程序引入地图 1.可以直接在页面设置map标签显示出地图,然后通过设置其大小控制地图显示面积。 2.可以通过scale改变地图缩放级别和longitude和latitude属性设置地图中心的经纬度。 3.可以通过markers属性设置地图标点 引入的数组必须是一下格式: 如果是从接口获取的数据

    2024年02月09日
    浏览(66)
  • 微信小程序(五)地图

            作者开发《目的地到了》需要满足用户选取地址作为目的地的需求,所以需要使用到地图。作者用的是腾讯地图,这里介绍下技术实现。         引入腾讯地图的组件包微信小程序JavaScript SDK | 腾讯位置服务,根据经纬度调用里面的api才能获取周围的地图数据展示

    2024年02月03日
    浏览(35)
  • 微信小程序腾讯地图定位转高德地图定位

    微信小程序获取到了当前用户的定位,需要在高德地图上进行渲染。 发现正常渲染后,偏差几百米。 这里图方便,直接丢到window上了 这里演示“腾讯地图”转“高德地图”

    2024年01月25日
    浏览(89)
  • 微信小程序 内置地图及打开外部地图导航

      用户点击通过目的地经纬度打开地图展示坐标点,然后可以选择外部安装的地图app进行导航搜索。    scale=“4” 缩放比例,缩放级别,取值范围为3-20。

    2024年02月03日
    浏览(50)
  • 微信小程序使用腾讯地图

    第一步:登录或者注册腾讯地图官方(地址:https://lbs.qq.com/) 第二步:在创建sdk; 创建方法:进入控制面板后显示创建sdk,点击之后输入名称和选择应用场景后点击设置选择web和小程序后输入APPID后点击确定就好。 第二步:在微信小程序开发管理页面里面的域名管理里面输

    2024年02月04日
    浏览(70)
  • 微信小程序---高德地图(一)

    微信小程序调用高德API,实现高德地图地位功能。 入门指南-微信小程序插件|高德地图API (amap.com) 登录控制台 登录高德开发平台控制台(高德开放平台 | 高德地图API) ,进行注册登录。  创建新应用 进入应用管理,创建新应用。  创建Key 点开新应用,新应用中添加 key,服

    2024年02月05日
    浏览(81)
  • 微信小程序集成腾讯地图

    微信小程序集成腾讯地图,实现用户附近停车位搜索显示。 官方地址:https://lbs.qq.com/ 下面这个是我的个人公共号 只会写Bug的程序猿 ,大家可以关注一下,一键三连。相互交流学习。

    2024年02月04日
    浏览(93)
  • 微信小程序实现地图定位

    前言 地图定位这个功能相信大家在学习插件的时候都有过接触,那么在这篇文章中我来为大家介绍微信小程序中的地图定位功能,很简单哦 在此之前我们可以先去微信官方文档小程序组件地图进行了解 点此进入小程序中map介绍 map组件提供了地图展示、交互、叠加点线面及文

    2024年02月01日
    浏览(57)
  • 微信小程序对接百度地图

    微信小程序如何接入百度地图导航功能?下面带来接入百度地图的操作教程。 1、登录百度地图开放平台:lbsyun.baidu.com,注册为开发者;需要填写使用场景,至少100字。 2、依次点击顶部开发文档—Web开发下方的微信小程序 Javascript API—开发指南—配置环境—下载百度地图微

    2024年02月10日
    浏览(41)
  • 微信小程序地图组件利用腾讯地图生成热力图

    由于找遍全网都没有使用过腾讯地图热力图接口的,所以我是靠自己一个个尝试的,所有尝试了很多步骤才做出来,所以很多步骤可能多于,但是我也不知道拿几个步骤才是真正实现热力图的,所以全部都写出来,如果大家有补充的可以在评论区发言。本人水平不足,很多地

    2024年02月10日
    浏览(84)

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

博客赞助

微信扫一扫打赏

请作者喝杯咖啡吧~博客赞助

支付宝扫一扫领取红包,优惠每天领

二维码1

领取红包

二维码2

领红包