【STM32+HAL库】---- 硬件IIC驱动0.96OLED

这篇具有很好参考价值的文章主要介绍了【STM32+HAL库】---- 硬件IIC驱动0.96OLED。希望对大家有所帮助。如果存在错误或未考虑完全的地方,请大家不吝赐教,您也可以点击"举报违法"按钮提交疑问。

硬件开发板:STM32G0B1RET6
软件平台:cubemax+keil+VScode

内容原著声明

代码借鉴学习于以下文章:
STM32 使用硬件IIC驱动0.96寸4针IOLED显示器(HAL库)

1 新建cubemax工程

1.1 配置系统时钟RCC

【STM32+HAL库】---- 硬件IIC驱动0.96OLED

1.2 配置引脚

【STM32+HAL库】---- 硬件IIC驱动0.96OLED

1.3 导出工程

略...

2 代码

2.1 OLED_IIC_Config.h

/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.h
 * @author zxr
 * @brief IIC和OLED基础配置头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef OLED_IIC_CONFIG_H
#define OLED_IIC_CONFIG_H

#include "main.h"
#include "stm32g0xx_hal.h"

#define  OLED_ADDRESS 		0x78	//OLED地址  默认0x78

//OLED命令控制宏
#define  	LEFT 			0x27
#define  	RIGHT 			0x26
#define  	UP 			0X29
#define  	DOWM			0x2A
#define  	ON			0xA7
#define  	OFF			0xA6


#define    	SCREEN_PAGE_NUM		(8)     //屏幕页数
#define    	SCREEN_PAGEDATA_NUM	(128)   //每页的数据个数
#define		SCREEN_COLUMN		(128)   //列数
#define  	SCREEN_ROW		(64)    //行数


void WriteCmd(unsigned char cmd);		//写命令
void WriteDat(unsigned char dat);		//写数据
void OLED_ON(void);				//开启OLED
void OLED_OFF(void);				//休眠OLED
void OLED_CLS(void);				//OLED清屏函数
void OLED_Init(void);				//OLED初始化函数
void OLED_RefreshRAM(void);			//更新数据缓冲区
void OLED_ClearRAM(void);			//清除数据缓冲区
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel);	//设置坐标像素点数据
void OLED_DisplayMode(unsigned char mode);	//屏幕内容取反显示
void OLED_IntensityControl(unsigned char intensity);//屏幕亮度调节
void OLED_Shift(unsigned char shift_num);	//全屏内容偏移指定距离
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction);	//屏幕内容水平方向滚动播放

#endif  /*OLED_IIC_CONFIG_H*/

2.2 OLED_IIC_Config.c

/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.c
 * @author zxr
 * @brief IIC初始化配置和OLED屏幕的底层驱动
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#include "OLED_IIC_Config.h"
#include "i2c.h"
#include "MyDelay.h"

unsigned char  ScreenBuffer[SCREEN_PAGE_NUM][SCREEN_COLUMN];//定义屏幕的存储空间



/**
* @brief  向OLED寄存器地址写一个byte的数据
* @param  addr:寄存器地址
* @param  data:要写入的数据
* @retval 无
*/
void I2C_WriteByte(uint8_t addr, uint8_t data)
{
	extern I2C_HandleTypeDef hi2c1;
	HAL_I2C_Mem_Write(&hi2c1, OLED_ADDRESS, addr, I2C_MEMADD_SIZE_8BIT, &data, 1, 10);
}

/**
 * ************************************************************************
 * @brief 写命令函数
 * @param[in] cmd  写入的命令
 * ************************************************************************
 */
void WriteCmd(unsigned char cmd)
{
	I2C_WriteByte(0x00, cmd);
}

/**
 * ************************************************************************
 * @brief 写数据函数
 * @param[in] dat  写入的数据
 * ************************************************************************
 */
void WriteDat(unsigned char dat)
{
	I2C_WriteByte(0x40, dat);
}

/**
 * ************************************************************************
 * @brief 开启OLED
 * ************************************************************************
 */
void OLED_ON(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X14);  //开启电荷泵
	WriteCmd(0XAF);  //OLED唤醒
}

/**
 * ************************************************************************
 * @brief 休眠OLED
 * ************************************************************************
 */
void OLED_OFF(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X10);  //关闭电荷泵
	WriteCmd(0XAE);  //OLED休眠
}

/**
 * ************************************************************************
 * @brief OLED清屏函数
 * ************************************************************************
 */
void OLED_CLS(void)//清屏
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		WriteCmd(0xb0+m);	//page0-page1
		WriteCmd(0x00);		//low column start address
		WriteCmd(0x10);		//high column start address
		for(n=0;n<128;n++)
		{
			WriteDat(0x00);
		}
	}
}

/**
 * ************************************************************************
 * @brief OLED初始化函数
 * ************************************************************************
 */
void OLED_Init(void)
{
	WriteCmd(0xAE); //显示关闭
	WriteCmd(0x20);	//设置内存寻址模式
	WriteCmd(0x10);	//00,水平寻址模式;01,垂直寻址模式;10,页寻址模式(复位);11,无效
	WriteCmd(0xb0);	//设置页寻址模式的页起始地址,0-7
	WriteCmd(0xc8);	//设置COM输出扫描方向
	WriteCmd(0x00); //-设置低列地址
	WriteCmd(0x10); //-设置高列地址
	WriteCmd(0x40); //-设置起始行地址
	WriteCmd(0x81); //设置对比度控制寄存器
	WriteCmd(0xff); //亮度调节 0x00~0xff
	WriteCmd(0xa1); //设置段重新映射0到127
	WriteCmd(0xa6); //设置正常显示
	WriteCmd(0xa8); //设置复用比例(1到64)
	WriteCmd(0x3F); //
	WriteCmd(0xa4); //0xa4,输出遵循RAM内容;0xa5,输出忽略RAM内容
	WriteCmd(0xd3); //设置显示偏移
	WriteCmd(0x00); //不偏移
	WriteCmd(0xd5); //--set display clock divide ratio/oscillator frequency
	WriteCmd(0xf0); //--set divide ratio
	WriteCmd(0xd9); //--set pre-charge period
	WriteCmd(0x22); //
	WriteCmd(0xda); //--set com pins hardware configuration
	WriteCmd(0x12);
	WriteCmd(0xdb); //--set vcomh
	WriteCmd(0x20); //0x20,0.77xVcc
	WriteCmd(0x8d); //设置DC-DC使能
	WriteCmd(0x14); //
	WriteCmd(0xaf); //--turn on oled panel
	OLED_CLS();
}

/**
 * ************************************************************************
 * @brief 更新数据缓冲区
 * ************************************************************************
 */
void OLED_RefreshRAM(void)
{
	// 页寻址模式填充
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		WriteCmd(0xb0+m);		//设置页地址b0~b7
		WriteCmd(0x00);			//设置显示位置—列低地址00-0f
		WriteCmd(0x10);			//设置显示位置—列高地址10-1f
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			WriteDat(ScreenBuffer[m][n]);
		}
	} 
}

/**
 * ************************************************************************
 * @brief 清除数据缓冲区
 * ************************************************************************
 */
void OLED_ClearRAM(void)
{
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			ScreenBuffer[m][n] = 0x00;
		}
	}
}

/**
 * ************************************************************************
 * @brief 设置坐标像素点数据
 * 
 * @param[in] x  			起始点横坐标(x:0~127)
 * @param[in] y  			起始点纵坐标(y:0~63)
 * @param[in] set_pixel  	该点的数据  SET_PIXEL = 1, RESET_PIXEL = 0
 * 
 * ************************************************************************
 */
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		if(set_pixel){
				ScreenBuffer[y/8][x] |= (0x01 << (y%8));
		}  
		else{
				ScreenBuffer[y/8][x] &= ~(0x01 << (y%8));
		}
	}
}

/**
 * ************************************************************************
 * @brief 屏幕内容取反显示
 * 
 * @param[in] mode  开关
 * 					开	ON	0xA7	点亮全屏
 *  				关	OFF	0xA6	默认此模式,设置像素点亮
 * 
 * ************************************************************************
 */
void OLED_DisplayMode(unsigned char mode)
{
	WriteCmd(mode);
}

/**
 * ************************************************************************
 * @brief 屏幕亮度调节
 * 
 * @param[in] intensity  亮度大小(0~255),默认为0x7f
 * 
 * ************************************************************************
 */
void OLED_IntensityControl(unsigned char intensity)
{
	WriteCmd(0x81);
	WriteCmd(intensity);
}

/**
 * ************************************************************************
 * @brief 全屏内容偏移指定距离
 * 
 * @param[in] shift_num  偏移距离(0~63)
 * 
 * ************************************************************************
 */
void OLED_Shift(unsigned char shift_num)
{
	for(unsigned char i = 0; i < shift_num; i++)
		{
			WriteCmd(0xd3);//设置显示偏移,垂直向上偏移
			WriteCmd(i);//偏移量
			HAL_Delay(10);//延时时间
		}
}


/**
 * ************************************************************************
 * @brief 屏幕内容水平方向滚动播放
 * 
 * @param[in] start_page  	开始页数	(0~7)
 * @param[in] end_page  	结束页数	(0~7)
 * @param[in] direction  	滚动方向
 * 								左		LEFT	0x27
 * 								右		RIGHT	0x26
 * @note 在开始页数和结束页数之间的内容才会滚动播放,且写命令顺序不得改变
 * ************************************************************************
 */
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction)
{
	WriteCmd(0x2e);  //关闭滚动

	WriteCmd(direction);//设置滚动方向
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(start_page);//设置开始页地址
	WriteCmd(0x05);//设置每个滚动步骤之间的时间间隔的帧频
	WriteCmd(end_page);//设置结束页地址
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(0xff);//虚拟字节设置,默认为0xff

	WriteCmd(0x2f);//开启滚动-0x2f,禁用滚动-0x2e,禁用需要重写数据
}


2.3 OLED_Function.h

/**
 * ************************************************************************
 * 
 * @file OLED_Function.h
 * @author zxr
 * @brief OLED功能函数驱动头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef _OLED_FUNCTION_H_
#define _OLED_FUNCTION_H_

#include "OLED_IIC_Config.h"

//字符串显示函数
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize);
//中文汉字显示函数
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch);
//BMP图片显示函数
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[]);

#endif /* _OLED_FUNCTION_H_ */

2.4 OLED_Function.c

#include "OLED_Function.h"
#include "OLED_Front.h"

/**
 * ************************************************************************
 * @brief 字符串显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	字符串(通过双引号引入)
 * @param[in] TextSize  字符大小(1:6*8 ;2:8*16)
 * 
 * ************************************************************************
 */
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) 
	{
		int32_t c = 0;
		unsigned char j = 0;
	
		switch(TextSize)
		{
			case 1:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 125 || (127-x < 6))//一行最大显示字符数:21字节显示,多出两列,不显示 || 剩余列小于6不能显示完整字符,换行显示
					{
						x = 0;
						y += 8;//换行显示
						if(63 - y < 8)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 6; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							OLED_SetPixel(x+m, y+n, (F6x8[c][m] >> n) & 0x01);
						}
					}
					x += 6;
					j++;
				}
			}break;
			case 2:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 127 || (127-x < 8))//16字节显示 || 剩余列小于8不能显示完整字符,换行显示
					{
						x = 0;
						y += 16;//换行显示
						if(63 - y < 16)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							for(unsigned char i = 0; i < 8; i++)
							{
								OLED_SetPixel(x+n, y+i+m*8, (F8X16[c][n+m*8] >> i) & 0x01);
							}
						}	
					}
					x += 8;
					j++;
				}
			}break;
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief 中文汉字显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	汉字字模库索引
 * 
 * @example OLED_ShowCN(0,0,"字");
 * ************************************************************************
 */
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch)
{
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		int32_t  len = 0,offset = sizeof(F16x16_CN[0].index);
		
		while(ch[len] != '\0')
		{
			if(x >= 127 || (127-x < 16))//8个汉字显示||剩余列小于16不能显示完整字符,换行显示
			{
				x = 0;
				y += 16;
				if(63 - y < 16)	// 不足以显示一行时不显示
					break;
			}
					
			//需要处理输入数据大于显示数据的问题
			for(unsigned char i = 0; i < sizeof(F16x16_CN)/sizeof(GB2312_CN); i++)
			{
				if(((F16x16_CN[i].index[0] == ch[len]) && (F16x16_CN[i].index[1] == ch[len+1]))){
						for(unsigned char m = 0; m < 2; m++)	//页
						{
							for(unsigned char n = 0; n < 16; n++) // 列
							{
								for(unsigned char j = 0; j < 8; j++)	// 行
								{
									OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
								}
							}
						}			
						x += 16;
						len += offset;
						break;
				}
				else if(F16x16_CN[i].index[0] == ch[len] && ch[len] == 0x20){
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 16; n++)
						{
							for(unsigned char j = 0; j < 8; j++)
							{
								OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
							}								
						}	
					}			
					x += 16; 
					len++;
					break;
				}
			}
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief BMP图片显示函数
 * 
 * @param[in] x0  	起始点横坐标(0~127)
 * @param[in] y0  	起始点纵坐标(0~63)
 * @param[in] L  	BMP图片宽度
 * @param[in] H  	BMP图片高度
 * @param[in] BMP  	图片取模地址
 * 
 * @example OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
 * ************************************************************************
 */
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[])
{
	if (x0 >= 0 && x0 < SCREEN_COLUMN && x0+L <= SCREEN_ROW &&\
		y0 >= 0 && y0 < SCREEN_COLUMN && y0+H <= SCREEN_ROW) {
		
		unsigned char *p = (unsigned char *)BMP;
		for(signed short int y = y0; y < y0+H; y+=8)
		{
			for(signed short int x = x0; x < x0+L; x++)
			{
				for(signed short int i = 0; i < 8; i++)
				{
					OLED_SetPixel(x, y+i, ((*p) >> i) & 0x01);
				}
				p++;
			}
		}
	}

	OLED_RefreshRAM();
}


2.5 OLED_Front.h

点击查看代码

#ifndef _OLED_FRONT_H_
#define _OLED_FRONT_H_


/**
 * ************************************************************************
 * @brief 大小6*8的字符取模库
 * ************************************************************************
 */
static unsigned char F6x8[][6] =
{
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
	0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
	0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
	0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
	0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
	0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
	0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
	0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
	0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
	0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
	0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
	0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
	0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
	0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
	0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
	0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
	0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
	0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
	0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
	0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
	0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
	0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
	0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
	0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
	0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
	0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
	0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
	0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
	0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
	0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
	0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
	0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
	0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
	0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
	0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
	0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
	0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
	0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
	0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
	0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
	0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
	0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
	0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
	0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
	0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
	0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
	0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
	0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
	0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
	0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
	0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
	0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
	0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
	0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
	0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
	0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
	0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
	0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
	0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
	0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
	0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
	0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
	0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
	0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
	0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
	0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
	0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
	0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
	0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
	0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
	0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
	0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
	0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
	0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
	0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
	0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
	0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
	0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
	0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
	0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
	0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
	0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
	0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
	0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};


/**
 * ************************************************************************
 * @brief 大小为8*16的字符取模库
 * ************************************************************************
 */
static unsigned char F8X16[][16]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};





/**
 * ************************************************************************
 * @brief 汉字字模数据结构
 * index[] 汉字内码索引。使用UTF-8编码格式时为index[3];使用GB2312或GBK编码格式时为index[2];
 * encoder	点阵码数据
 * ************************************************************************
 */
typedef struct {     
    char index[2];                                             
    unsigned char encoder[32];                                             
}GB2312_CN;

/**
 * ************************************************************************
 * @brief GB2312_CN 16*16汉字字模库
 * 取模设置:共阴、列行式、逆向输出
 * 数组格式参照代码所示
 * ************************************************************************
 */
static GB2312_CN F16x16_CN[] = {

	{"嵌",
		0x80,0x80,0xEE,0x88,0x88,0x88,0xE8,0x8F,0x08,0x88,0x78,0x48,0x4E,0x40,0xC0,0x00,
		0x00,0x00,0x7F,0x24,0x24,0x24,0x7F,0x00,0x81,0x40,0x30,0x0F,0x30,0x41,0x80,0x00,
	},

	{"入",
		0x00,0x00,0x00,0x00,0x00,0x01,0xE2,0x1C,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x03,0x0C,0x30,0x40,0x80,0x80,0x00,
	},

	{"式",
		0x10,0x10,0x90,0x90,0x90,0x90,0x90,0x10,0x10,0xFF,0x10,0x10,0x11,0x16,0x10,0x00,
		0x00,0x20,0x60,0x20,0x3F,0x10,0x10,0x10,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00,
	},

	{"学",
		0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,
		0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,
	},

	{"习",
		0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
		0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,
	},

};




/**
 * ************************************************************************
 * @brief astronaut_x 太空人52*48系列(共10张)  图像取模 纵向取模,字节倒序
 * ************************************************************************
 */
static unsigned char astronaut_0[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xA0,0x60,0x60,0x60,0xA0,0xC0,0x40,0x40,0x80,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x10,0x00,0x00,0x30,0x0C,0x02,0x81,
	0xE0,0xF0,0xF8,0xFC,0xFC,0xFC,0xFC,0xFE,0xFC,0xFC,0xFC,0xF8,0xF8,0xF1,0xE2,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x40,0x00,0x0F,
	0x60,0x80,0x00,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x60,0x0F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x02,0x08,0x10,0x42,0x84,0x04,0x09,0x13,0x17,0x17,0x0F,0x1F,0x6F,
	0x1F,0x1F,0x1F,0x0F,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x44,0x48,0x90,0x62,0x98,
	0x00,0xE4,0x08,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x18,0x40,0x04,0x28,0x20,0x98,0xA4,0xA4,0x18,0x40,0x00,0x02,
	0x00,0x0A,0x04,0x03,0x0C,0xC0,0x00,0x40,0x80,0x01,0x04,0x00,0x00,0x00,0x00,0x00,
	0x00,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x08,0x10,
	0x42,0x00,0x08,0x38,0x48,0x05,0x24,0x1E,0x09,0x00,0x04,0x00,0x10,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	
};
static unsigned char astronaut_1[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,
	0xE4,0x60,0x20,0x20,0x20,0x00,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
	0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x8C,0xC2,0xE1,
	0xE3,0xF1,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x01,0x02,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFC,0x00,0x00,0xB0,0x70,0x4F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x87,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x3F,
	0x9F,0x1F,0x1F,0x0B,0x00,0x04,0x03,0x00,0x00,0x04,0x00,0x08,0x01,0x40,0x22,0x14,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x40,
	0x80,0x00,0x00,0x00,0x01,0x09,0x26,0xB0,0x20,0xC0,0xA0,0x80,0x00,0x41,0x08,0x05,
	0x00,0x08,0x05,0x03,0x08,0x80,0x00,0x00,0x00,0x01,0x04,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x00,0x80,0x08,0x08,0x29,0x26,0x0E,0x00,0x09,0x00,0x05,0x00,0x00,0x02,0x84,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_2[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x00,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB0,0x9C,0xCE,0xC7,
	0xC1,0xC1,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,
	0x30,0x81,0x02,0x04,0x10,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0xF0,0x00,0x00,
	0x00,0x00,0x00,0x80,0xEC,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x7F,0x93,0x10,0x08,0x04,0x04,0x03,0x00,0x00,0x10,0x21,0x40,0x82,0x44,0x28,0x10,
	0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x07,0x1C,0x70,0xA0,0xE0,0x80,0x02,0x92,0x12,0x00,0x00,
	0x10,0x09,0x06,0x03,0x08,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x01,
	0x04,0x00,0x08,0x08,0x2F,0x22,0x1E,0x00,0x09,0x00,0x05,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_3[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x8E,0x81,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xC4,
	0x30,0xC0,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xE0,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE2,0x2F,0x20,0x20,0x40,0x00,0x00,0x01,0x04,0x10,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x10,0xF0,0x10,0x08,0x04,0x04,0x03,0x20,0x42,0x06,0x0C,0x38,0xE0,0xC1,0x02,0x04,
	0x90,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x10,0x20,0x18,0xA4,0xA4,0x18,0x01,0x06,0x08,
	0x10,0x01,0x0D,0x07,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x00,0x04,0x18,0x24,0x22,0x11,0x01,0x08,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x80,0x00,0x06,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_4[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x40,0x44,
	0x24,0x24,0x20,0x22,0x20,0x20,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xEC,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x1B,0x04,
	0x18,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,
	0x7C,0xFC,0xF8,0xF8,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE0,0x1F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x07,0x07,0x0F,0x0F,0x1F,0x10,0x10,0x10,0x10,
	0x10,0xF0,0x90,0x08,0x38,0x74,0xC2,0x81,0x00,0x00,0x00,0x00,0x01,0x04,0x08,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x02,0x02,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x08,0x20,0x18,0x00,0x00,0x00,0x02,0x04,0x10,0x60,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x16,0x38,0x70,0xF0,0x83,0x8F,0x94,0x28,0x08,
	0x08,0x14,0xC6,0x19,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x30,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x04,0x04,0x28,0x04,0x23,0x03,0x11,0x0E,0x45,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_5[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x60,0x44,0xC4,0x84,0x08,0x10,0x20,0x4C,0x80,0x00,0x00,
	0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x30,0x1C,0x1E,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x02,0x05,0x0A,0x0C,
	0x30,0xC1,0x02,0x0C,0x10,0x60,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x05,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xF0,0x4F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x0C,0x08,0x10,0x10,0x10,0x00,0x30,0xA0,
	0x30,0xD0,0x08,0x04,0x02,0x02,0x01,0x00,0x00,0x03,0x06,0x1C,0x38,0xE1,0xE2,0x9C,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
	0x00,0x00,0x00,0x03,0x18,0x60,0x07,0x3E,0x28,0xB0,0xC0,0x80,0xA0,0x10,0x08,0x00,
	0x04,0x8A,0x04,0x03,0x0C,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x24,
	0x28,0x00,0x00,0x00,0x03,0x04,0x18,0x60,0x80,0x00,0x01,0x00,0x01,0x01,0x00,0x01,
	0x02,0x04,0x08,0x38,0x48,0x47,0x26,0x1E,0x09,0x09,0x04,0x02,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_6[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x60,0xA0,0x20,0x60,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x3F,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF8,0xC0,0x00,0x00,0x10,0x20,0x80,0x40,0x40,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x30,0xC0,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x03,0x07,0x87,0x6F,0x0F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x05,0x08,0x08,0x10,0x10,0x10,0x90,0x60,
	0x30,0x10,0x10,0x18,0x48,0x14,0x42,0x01,0x09,0x20,0x42,0x84,0x48,0x30,0x40,0x00,
	0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x08,0x10,0x40,0x00,0x00,0x01,0x84,0x89,0x64,0x0C,0x92,0x21,
	0x02,0x0C,0x01,0x0A,0xC0,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x00,
	0x01,0x02,0x04,0x39,0x4A,0x3C,0x22,0x12,0x01,0x08,0x07,0x00,0x00,0x00,0x00,0x00,
	0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_7[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xE0,0x60,0x60,0x20,0xA0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x0F,0x1F,
	0x1F,0x3F,0x3F,0xBF,0x7F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,
	0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x04,0x00,0x0E,0x14,0x18,0x10,0x90,0x60,0x20,
	0x30,0x90,0xD0,0x08,0x04,0x04,0x82,0x01,0x01,0x00,0x82,0x44,0x08,0x10,0xC0,0x00,
	0x00,0x00,0x00,0x00,0x01,0x04,0x0B,0x20,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x04,0x10,0x40,0x81,0x07,0x1C,0xB0,0xF0,0x01,0x8C,0x08,0x63,0x00,
	0x00,0x01,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x01,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x02,0x00,0x04,0x00,0x18,0x24,0x20,0x12,0x01,0x09,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_8[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0xC0,
	0x24,0x20,0x20,0x20,0xA0,0xC0,0xC4,0xC4,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x06,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x07,
	0x03,0x01,0x00,0xE0,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x03,0x1F,0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0xFF,0x8F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x04,0x04,0x08,0x00,0x10,0x18,0x18,0x10,0x20,
	0x10,0x10,0x11,0x09,0x05,0x04,0x03,0x00,0x00,0x00,0x03,0x04,0x0A,0xA4,0xE8,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x0C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x04,0x20,0x40,0x23,0x18,0x20,0x80,0x80,0x0A,0x41,0x09,0x00,
	0x00,0x08,0x84,0x03,0x08,0xA0,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x81,
	0x04,0x00,0x08,0x30,0x48,0x04,0x23,0x17,0x09,0x04,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,
	
};
static unsigned char astronaut_9[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x88,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x0E,0x07,
	0x02,0xC0,0xF0,0xF8,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x02,0x04,0x10,0x20,0x80,0x00,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x0F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x7F,0x8F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x04,0x08,0x00,0x10,0x11,0x11,0x23,0x23,
	0x13,0x13,0x93,0x0B,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x45,0x0A,0x64,0xC8,0x10,
	0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x10,0x40,0x01,0x24,0x10,0x40,0x14,0xA0,0x04,0x00,0x00,0x01,
	0x02,0x88,0x04,0x07,0xB0,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x01,0x02,0x02,0x01,0x01,0x02,
	0x04,0x00,0x08,0x30,0x48,0x45,0x26,0x1A,0x01,0x08,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};



#endif

3 功能验证

首先在main.c中引入头文件

/* USER CODE BEGIN Includes */
#include "OLED_IIC_Config.h"
#include "OLED_Function.h"
#include "OLED_Front.h"
/* USER CODE END Includes */

随即根据要求在main函数中添加对应功能函数即可

3.1 显示英文字符

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowStr(0,16,"OLED-TEXT",2);
}

3.2 显示中文汉字

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
}

注意】使用时应将编译器编码选项选择为GBK系列,否则编译报错,尤其注意通过keil修改后,再用vscode打开看见有乱码时,一定检查一下编译器的编码格式是否为GBK系列文章来源地址https://www.toymoban.com/news/detail-825383.html

3.3 显示内容垂直偏移指定距离

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,40,"OLED-TEXT",1);
  OLED_ShowChinese(0,48,"嵌");
  OLED_ShowChinese(16,48,"入");
  OLED_ShowChinese(32,48,"式");
  OLED_Shift(20);
}

3.4 显示内容水平循环滚动

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
  OLED_HorizontalShift(0,3,RIGHT);
}

3.3 显示BMP图片

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化

  while (1)
  {
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_1);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_2);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_3);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_4);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_5);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_6);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_7);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_8);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_9);
  }
}

到了这里,关于【STM32+HAL库】---- 硬件IIC驱动0.96OLED的文章就介绍完了。如果您还想了解更多内容,请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章,希望大家以后多多支持TOY模板网!

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处: 如若内容造成侵权/违法违规/事实不符,请点击违法举报进行投诉反馈,一经查实,立即删除!

领支付宝红包 赞助服务器费用

相关文章

  • STM32使用IIC协议驱动0.96寸OLED屏

    IIC是常用的协议之一,它通过不同的地址来区分设备,并且端口需要是开漏模式,并且需要接上拉电阻  要使用IIC驱动OLED,首先要配置IIC 然后编写写入函数 ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) 为判断事件的函数 有以下多种事件 OLED初始化 上图分别为 (起始位

    2024年02月03日
    浏览(41)
  • STM32F103硬件IIC控制4针0.96寸OLED显示屏

    OLED使用的0.96寸四针屏幕,以下直接看实际操作。 使用PCtoLCD2002软件提取OLED字模。 注意红色方框的选项内容,不要选错了,选错会导致烧录程序后无法显示。 此为硬件IIC,如果使用过我的模拟IIC控制程序可直接看 void OLED_Write_Command(unsigned char IIC_Command); void OLED_Write_Data(unsig

    2024年02月02日
    浏览(51)
  • 【STM32CubeMX】教程二_IIC驱动0.96oled屏幕(SSD1306)

    本篇博客涉及以下内容 IIC通讯原理讲解、代码编写 SSD1306驱动芯片datasheet讲解、驱动代码编写、0.96oled模块原理图说明 STM32CubeMX配置IIC 使用硬件:STM32F103C8T6 使用软件:STM32CubeMX、keil5(MDK)、VSCode(搭载keil assistant插件) 提示:以下是本篇文章正文内容   在计算机科学里,大

    2023年04月21日
    浏览(50)
  • STM32配合CubeMX硬件SPI驱动0.96寸OLED

    目录 一、简单介绍 1.1 OLED 1.2 SPI协议 接口 优点 缺点 数据传输 二、实战 2.1 工程配置 2.2 测试工程 2.3 波形分析 三、驱动OLED 3.1 初始化代码 3.2 清屏函数 3.3 设置坐标函数 3.4 显示字符函数 3.5 显示字符串函数 3.6 显示图片函数 附录 驱动代码文件 oled.c oled.h f6x8.h 1.1 OLED 有机发

    2024年02月02日
    浏览(39)
  • STM32配合cubeMX硬件I2C驱动0.96寸OLED

    目录 一、简单介绍 1.1   OLED 1.2   I2C协议 二、实战 2.1 工程配置 2.2 测试工程 2.3 波形分析 三、驱动OLED 3.1 初始化代码 3.2 清屏函数 3.3 设置坐标函数 3.4 显示字符函数 3.5 显示字符串函数 3.6 显示图片函数 附录 驱动代码文件 oled.c oled.h f6x8.h 有机发光二极管 (英语:Organic

    2024年02月08日
    浏览(64)
  • stm32使用模拟IIC控制四针0.96寸OLED

    STM32系列模拟IIC控制0.96寸OLED方法 首先说为什么要采用模拟IIC来控制OLED,采用STM32系列单片机硬件IIC时有可能出现程序死掉的情况,我遇到的情况是与程序while的使用有关(听说原因很随机)。这个时候我们可以采用两个GPIO来模拟IIC通信控制OLED屏幕。顺带说一下OLED的使用原理

    2024年02月14日
    浏览(60)
  • 7针0.96寸OLED的HAL库代码(硬件SPI/全代码/stm32f1/CubeMX配置/包含有正负浮点数/100%一次点亮)

    HC-SR04超声波模块的使用  编码电机以及双电机驱动 4针 0.96\\\'OLED的使用 更多有意思的文章点击“我的主页” --------😐 更多有意思的视频 ----- B站 @想要亿只独角兽 --------😐 之前发布了一篇硬件I2C的0.96\\\' OLED驱动代码,这次就添加一篇硬件SPI的驱动代码。 其实改动的代码不多,

    2024年02月16日
    浏览(47)
  • 4针0.96寸OLED的HAL库代码(硬件I2C/全代码/stm32f1/CubeMX配置/包含有正负浮点数/100%一次点亮)

    一、HC-SR04超声波模块的使用 二、4针OLED的HAL库代码介绍及使用(本篇) 三、7针OLED的HAL库代码介绍及使用 四、编码电机以及双电机驱动 更多有意思的文章点击“我的主页” --------😐 更多有意思的视频 ----- B站 @想要亿只独角兽 --------😐 之前在做一些小项目时用到了OLED,到

    2024年02月10日
    浏览(40)
  • STM32F103模拟IIC控制4针0.96寸OLED显示屏

    OLED,即有机发光二极管(Organic Light-Emitting Diode),又称为有机电激光显示(Organic Electroluminesence Display, OELD)。OLED由于同时具备自发光,不需背光源、对比度高、厚度薄、视角广、反应速度快、可用于挠曲性面板、使用温度范围广、构造及制程较简单等优异之特性,被认为

    2023年04月24日
    浏览(54)
  • 0.96OLED STM32 SPI驱动(一)

    闲来无聊,翻出了一个OLED,本来想串流做个小显示器用,感觉难度太大。将就变成了下面这 个样子,姑且叫火柴人大乱斗之OLED。 火柴人之OLED 分两步走,先驱动OLED能显示一副图片,本篇讲述此内容。 第二步显示动画,放在下一篇中讲。 查资料得到此OLED为SPI通信,SCL对应连

    2024年02月06日
    浏览(53)

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

博客赞助

微信扫一扫打赏

请作者喝杯咖啡吧~博客赞助

支付宝扫一扫领取红包,优惠每天领

二维码1

领取红包

二维码2

领红包