华为配置直连三层组网直接转发示例-Toy模板网

这篇具有很好参考价值的文章主要介绍了华为配置直连三层组网直接转发示例。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

华为配置直连三层组网直接转发示例

组网图形

华为配置直连三层组网直接转发示例,网络,php

图1 配置直连三层组网直接转发示例组网图

业务需求
组网需求
数据规划
配置思路
配置注意事项
操作步骤
配置文件
扩展阅读

业务需求

企业用户接入WLAN网络，以满足移动办公的最基本需求。且在覆盖区域内移动发生漫游时，不影响用户的业务使用。使用VLAN pool作为业务VLAN，可以避免出现IP地址资源不足或者IP地址资源浪费，减小单个VLAN下的用户数目，缩小广播域。

组网需求

AC组网方式：直连三层组网。
DHCP部署方式：
- AC作为DHCP服务器为AP分配IP地址。
- 汇聚交换机SwitchB作为DHCP服务器为STA分配IP地址。
业务数据转发方式：直接转发。

数据规划

表1 AC数据规划表
项目	数据
AP管理VLAN	VLAN10、VLAN100
STA业务VLAN	VLAN pool 名称：sta-pool VLAN pool中加入的VLAN：101、102
DHCP服务器	AC作为AP的DHCP服务器汇聚交换机作为STA的DHCP服务器，STA的默认网关为10.23.101.2和10.23.102.2
AP地址池	10.23.10.2～10.23.10.254/24
STA地址池	10.23.101.3～10.23.101.254/24 10.23.102.3～10.23.102.254/24
AC源接口	VLANIF100：10.23.100.1/24
AP组	名称：ap-group1 引用模板：VAP模板wlan-net、2G射频模板wlan-radio2g、5G射频模板wlan-radio5g
域管理模板	名称：default 国家码：中国调优信道集合：配置2.4G和5G调优带宽和调优信道
SSID模板	名称：wlan-net SSID名称：wlan-net
安全模板	名称：wlan-net 安全策略：WPA-WPA2+PSK+AES 密码：a1234567
VAP模板	名称：wlan-net 转发模式：直接转发业务VLAN：VLAN pool 引用模板：SSID模板wlan-net、安全模板wlan-net
空口扫描模板	名称：wlan-airscan 探测信道集合：调优信道空口扫描间隔时间：60000毫秒空口扫描持续时间：60毫秒
2G射频模板	名称：wlan-radio2g 引用模板：空口扫描模板wlan-airscan
5G射频模板	名称：wlan-radio5g 引用模板：空口扫描模板wlan-airscan

配置思路

配置AP、AC和周边网络设备之间实现三层互通。
配置VLAN pool，用于作为业务VLAN。
配置AP上线。
1. 创建AP组，用于将需要进行相同配置的AP都加入到AP组，实现统一配置。
2. 配置AC的系统参数，包括国家码、AC与AP之间通信的源接口。
3. 配置AP上线的认证方式并离线导入AP，实现AP正常上线。
配置WLAN业务参数，实现STA访问WLAN网络功能。

当用户新开局时，对于AP的射频信道的设置，用户可根据网络规划手动指定，也可使用射频调优功能自动选择最佳信道。本例中采用射频调优功能自动选择最佳信道。

配置注意事项

纯组播报文由于协议要求在无线空口没有ACK机制保障，且无线空口链路不稳定，为了纯组播报文能够稳定发送，通常会以低速报文形式发送。如果网络侧有大量异常组播流量涌入，则会造成无线空口拥堵。为了减小大量低速组播报文对无线网络造成的冲击，建议配置组播报文抑制功能。配置前请确认是否有组播业务，如果有，请谨慎配置限速值。
- 业务数据转发方式采用直接转发时，建议在直连AP的交换机接口上配置组播报文抑制。
- 业务数据转发方式采用隧道转发时，建议在AC的流量模板下配置组播报文抑制。
建议在与AP直连的设备接口上配置端口隔离，如果不配置端口隔离，尤其是业务数据转发方式采用直接转发时，可能会在VLAN内形成大量不必要的广播报文，导致网络阻塞，影响用户体验。
隧道转发模式下，管理VLAN和业务VLAN不能配置为同一VLAN，且AP和AC之间只能放通管理VLAN，不能放通业务VLAN。
V200R021C00版本开始，配置CAPWAP源接口或源地址时，会检查和安全相关的配置是否已存在，包括DTLS加密的PSK、AC间DTLS加密的PSK、登录AP的用户名和密码、全局离线管理VAP的登录密码，均已存在才能成功配置，否则会提示用户先完成相关的配置。
V200R021C00版本开始，AC默认开启CAPWAP控制隧道的DTLS加密功能。开启该功能，添加AP时AP会上线失败，此时需要先开启CAPWAP DTLS不认证方式（capwap dtls no-auth enable）让AP上线，以便AP获取安全凭证，AP上线后应及时关闭该功能（undo capwap dtls no-auth enable），避免未授权AP上线。

操作步骤

配置周围设备

# 配置接入交换机SwitchA的GE0/0/1和GE0/0/2接口加入VLAN10、VLAN101和VLAN102，GE0/0/1的缺省VLAN为VLAN10。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd"><HUAWEI> <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b903529936190921">system-view</strong>
[HUAWEI] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b867879212190921">sysname SwitchA</strong>
[SwitchA] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1309173779190921">vlan batch 10 101 102</strong>
[SwitchA] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b194528142190921">interface gigabitethernet 0/0/1</strong>
[SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1682139101190921">port link-type trunk</strong>
[SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1680964083190921">port trunk pvid vlan 10</strong>
[SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1479595460190921">port trunk allow-pass vlan 10 101 102</strong>
[SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1528552505190921">port-isolate enable</strong>
[SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b705020985190921">quit</strong>
[SwitchA] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1127825529190921">interface gigabitethernet 0/0/2</strong>
[SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b362290783190921">port link-type trunk</strong>
[SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1285916817190921">port trunk allow-pass vlan 10 101 102</strong>
[SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b289781360190921">quit</strong></span></span></span>

# 配置汇聚交换机SwitchB的接口GE0/0/1加入VLAN10、VLAN101和VLAN102，接口GE0/0/2加入VLAN100、VLAN101和VLAN102，并创建接口VLANIF100，地址为10.23.100.2/24。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd"><HUAWEI> <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b771519973190921">system-view</strong>
[HUAWEI] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1671962770190921">sysname SwitchB</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1125174561190921">vlan batch 10 100 101 102</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1481892711190921">interface gigabitethernet 0/0/1</strong>
[SwitchB-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1846920553190921">port link-type trunk</strong>
[SwitchB-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1592500570190921">port trunk allow-pass vlan 10 101 102</strong>
[SwitchB-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b550195637190921">quit</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1214802604190921">interface gigabitethernet 0/0/2</strong>
[SwitchB-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b604599042190921">port link-type trunk</strong>
[SwitchB-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b748149093190921">port trunk allow-pass vlan 100 101 102</strong>
[SwitchB-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b966432215190921">quit</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b418189420190921">interface vlanif 100</strong>
[SwitchB-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b939854963190921">ip address 10.23.100.2 24</strong>
[SwitchB-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b288226735190921">quit</strong>
</span></span></span>

# 配置Router的接口GE1/0/0加入VLAN101和VLAN102，创建接口VLANIF101并配置IP地址为10.23.101.2/24，创建接口VLANIF102并配置IP地址为10.23.102.2/24。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd"><Huawei> <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1660975988190921">system-view</strong>
[Huawei] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1226113612190921">sysname Router</strong>
[Router] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1810277086190921">vlan batch 101 102</strong>
[Router] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1780942278190921">interface gigabitethernet 1/0/0</strong>
[Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1672774733190921">port link-type trunk</strong>
[Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b189355832190921">port trunk allow-pass vlan 101 102</strong>
[Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b961790458190921">quit</strong>
[Router] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1935309198190921">interface vlanif 101</strong>
[Router-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b218616744190921">ip address 10.23.101.2 24</strong>
[Router-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b617077487190921">quit</strong>
[Router] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b824497200190921">interface vlanif 102</strong>
[Router-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b976896216190921">ip address 10.23.102.2 24</strong>
[Router-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b89740708190921">quit</strong></span></span></span>

配置AC与其它网络设备互通

# 配置AC的接口GE0/0/1加入VLAN100、VLAN101和VLAN102，GE0/0/2加入VLAN101和VLAN102，并创建接口VLANIF100。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd"><HUAWEI> <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1225697583190921">system-view</strong>
[HUAWEI] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b424520985190921">sysname AC</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1394743100190921">vlan batch 100</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b976674377190921">interface vlanif 100</strong>
[AC-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b671557542190921">ip address 10.23.100.1 24</strong>
[AC-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1922888122190921">quit</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b2080508700190921">interface gigabitethernet 0/0/1</strong>
[AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b692347549190921">port link-type trunk</strong>
[AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b21080693190921">port trunk allow-pass vlan 100 101 102</strong>
[AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1229099496190921">quit</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1470667568190921">interface gigabitethernet 0/0/2</strong>
[AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b677856815190921">port link-type trunk</strong>
[AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b1478675356190921">port trunk allow-pass vlan 101 102</strong>
[AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_b956866832190921">quit</strong>
</span></span></span>

# 配置AC到AP的路由，下一跳为SwitchB的VLANIF100。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b957469325190921">ip route-static 10.23.10.0 24 10.23.100.2</strong></span></span></span>

配置DHCP服务为AP和STA分配IP地址

# 在SwitchB上配置DHCP中继，代理AC分配IP地址。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b709859105190921">dhcp enable</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1603317566190921">interface vlanif 10</strong>
[SwitchB-Vlanif10] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b82434276190921">ip address 10.23.10.1 24</strong>
[SwitchB-Vlanif10] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1453619429190921">dhcp select relay</strong>
[SwitchB-Vlanif10] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b2144273645190921">dhcp relay server-ip 10.23.100.1</strong>
[SwitchB-Vlanif10] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b868750119190921">quit</strong></span></span></span>

# 在SwitchB上创建VLANIF101和VLANIF102接口为STA提供地址，并指定默认网关。

DNS服务器地址请根据实际需要配置。常用配置方法如下：

接口地址池场景，需要在VLANIF接口视图下执行命令dhcp server dns-list ip-address &<1-8>。
全局地址池场景，需要在IP地址池视图下执行命令dns-list ip-address &<1-8>。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b873658886190921">interface vlanif 101</strong>
[SwitchB-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b95742990190921">ip address 10.23.101.1 24</strong>
[SwitchB-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1732731206190921">dhcp select interface</strong>
[SwitchB-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b401619151190921">dhcp server gateway-list 10.23.101.2</strong>
[SwitchB-Vlanif101] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b2128265174190921">quit</strong>
[SwitchB] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1109687378190921">interface vlanif 102</strong>
[SwitchB-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1695334458190921">ip address 10.23.102.1 24</strong>
[SwitchB-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b784759301190921">dhcp select interface</strong>
[SwitchB-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1025754285190921">dhcp server gateway-list 10.23.102.2</strong>
[SwitchB-Vlanif102] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b22249946190921">quit</strong></span></span></span>

# 在AC上创建全局地址池为AP提供地址。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b365851844190921">dhcp enable</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b990563412190921">ip pool huawei</strong>
[AC-ip-pool-huawei] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b169375134190921">network 10.23.10.0 mask 24</strong>
[AC-ip-pool-huawei] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1498722238190921">gateway-list 10.23.10.1</strong>
[AC-ip-pool-huawei] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1127109521190921">option 43 sub-option 3 ascii 10.23.100.1</strong>
[AC-ip-pool-huawei] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1641310089190921">quit</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1333165711190921">interface vlanif 100</strong>
[AC-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1287471321190921">dhcp select global</strong>
[AC-Vlanif100] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b689492679190921">quit</strong></span></span></span>

配置VLAN pool，用于作为业务VLAN

# 在AC上新建VLAN pool，并将VLAN101和VLAN102加入其中，配置VLAN pool中的VLAN分配算法为“hash”。

本例VLAN pool中的VLAN分配算法配置为“hash”。分配算法缺省情况下为“hash”，如果之前没有修改其缺省配置，可以不用执行命令assignment hash。

本例VLAN pool仅以加入VLAN101和VLAN102两个VLAN为例，实际可以配置多个VLAN加入VLAN pool，配置方法与VLAN101和VLAN102一致。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b352911723190921">vlan batch 101 102</strong>
[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b351799307190921">vlan pool sta-pool</strong>
[AC-vlan-pool-sta-pool] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1532711495190921">vlan 101 102</strong>
[AC-vlan-pool-sta-pool] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b24709074190921">assignment hash</strong>
[AC-vlan-pool-sta-pool] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1762892773190921">quit</strong></span></span></span>

配置AP上线

# 创建AP组，用于将相同配置的AP都加入同一AP组中。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1451837292190921">wlan</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1710308668190921">ap-group name ap-group1</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b294415960190921">quit</strong></span></span></span>

# 创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1815954045190921">regulatory-domain-profile name default</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1765454957190921">country-code cn</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b464951690190921">quit</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1132959133190921">ap-group name ap-group1</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b4510754102210">regulatory-domain-profile default</strong>
Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continue?[Y/N]:<strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_zh-cn_task_0175818418_b17491131153716">y</strong>  
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b101836067190921">quit</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b465166413190921">quit</strong></span></span></span>

# 配置AC的源接口。

V200R021C00版本开始，配置CAPWAP源接口或源地址时，会检查和安全相关的配置是否已存在，包括DTLS加密的PSK、AC间DTLS加密的PSK、登录AP的用户名和密码、全局离线管理VAP的登录密码，均已存在才能成功配置，否则会提示用户先完成相关的配置。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b806281647190921">capwap source interface vlanif 100</strong>
Set the DTLS PSK(contains 6-32 plain-text characters, or 48 or 68 cipher-text characters that must be a combination of at least two of the following: lowercase letters a to z, uppercase letters A to Z, digits, and special characters):******

Set the DTLS inter-controller PSK(contains 6-32 plain-text characters, or 48 or 68 cipher-text characters that must be a combination of at least two of the following: lowercase letters a to z, uppercase letters A to Z, digits, and special characters):******

Set the user name for FIT APs(contains 4-31 plain-text characters, which can only include letters, digits and underlines. And the first character must be a letter):admin

Set the password for FIT APs(plain-text password of 8-128 characters or cipher-text password of 48-188 characters that must be a combination of at least three of the following: lowercase letters a to z, uppercase letters A to Z, digits, and special characters):********

Set the global temporary-management psk(contains 8-63 plain-text characters, or 48-108 cipher-text characters that must be a combination of at least two of the following: lowercase letters a to z, uppercase letters A to Z, digits, and special characters):********</span></span></span>

# 在AC上离线导入AP，并将AP加入AP组“ap-group1”中。假设AP的MAC地址为60de-4476-e360，并且根据AP的部署位置为AP配置名称，便于从名称上就能够了解AP的部署位置。例如MAC地址为60de-4476-e360的AP部署在1号区域，命名此AP为area_1。

ap auth-mode命令缺省情况下为MAC认证，如果之前没有修改其缺省配置，可以不用执行ap auth-mode mac-auth。

举例中使用的AP为AP5030DN，具有射频0和射频1两个射频。AP5030DN的射频0为2.4GHz射频，射频1为5GHz射频。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b763711121190921">wlan</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1389711844190921">ap auth-mode mac-auth</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1382708357190921">ap-id 0 ap-mac 60de-4476-e360</strong>
[AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1272920990190921">ap-name area_1</strong>
Warning: This operation may cause AP reset. Continue? [Y/N]:<strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_zh-cn_task_0175818418_b460951517190906">y</strong>  
[AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b614746147190921">ap-group ap-group1</strong>
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration s of the radio, Whether to continue? [Y/N]:<strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_zh-cn_task_0175818418_b1651706244190906">y</strong>  
[AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b959850628190921">quit</strong></span></span></span>

# 将AP上电后，当执行命令display ap all查看到AP的“State”字段为“nor”时，表示AP正常上线。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b614686600190921">display ap all</strong>
Total AP information:nor  : normal          [1]
Extra information:
P  : insufficient power supply
--------------------------------------------------------------------------------------------------
ID   MAC            Name   Group     IP            Type            State STA Uptime      ExtraInfo
--------------------------------------------------------------------------------------------------
0    60de-4476-e360 area_1 ap-group1 10.23.10.254  AP5030DN        nor   0   10S         -
--------------------------------------------------------------------------------------------------
Total: 1</span></span></span>

配置WLAN业务参数

# 创建名为“wlan-net”的安全模板，并配置安全策略。

举例中以配置WPA-WPA2+PSK+AES的安全策略为例，密码为“a1234567”，实际配置中请根据实际情况，配置符合实际要求的安全策略。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1991067776190921">security-profile name wlan-net</strong>
[AC-wlan-sec-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b851752672190921">security wpa-wpa2 psk pass-phrase a1234567 aes</strong>
[AC-wlan-sec-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b337241812190921">quit</strong></span></span></span>

# 创建名为“wlan-net”的SSID模板，并配置SSID名称为“wlan-net”。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b69022931190921">ssid-profile name wlan-net</strong>
[AC-wlan-ssid-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b36723145190921">ssid wlan-net</strong>
[AC-wlan-ssid-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1738903244190921">quit</strong></span></span></span>

# 创建名为“wlan-net”的VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1185640161190921">vap-profile name wlan-net</strong>
[AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1846355048190921">forward-mode direct-forward</strong>
[AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1998160604190921">service-vlan vlan-pool sta-pool</strong>
[AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b2110637550190921">security-profile wlan-net</strong>
[AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b10062148190921">ssid-profile wlan-net</strong>
[AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_b1248792040190921">quit</strong></span></span></span>

# 配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板“wlan-net”的配置。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b2051092768190921">ap-group name ap-group1</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1753511747190921">vap-profile wlan-net wlan 1 radio 0</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b1212706755190921">vap-profile wlan-net wlan 1 radio 1</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912356_zh-cn_task_0176912351_b729861449190921">quit</strong></span></span></span>

开启射频调优功能自动选择AP最佳信道和功率

# 使能射频的信道和功率自动调优功能。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1470083908190921">ap-group name ap-group1</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b2057447356190921">radio 0</strong>
[AC-wlan-group-radio-ap-group1/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b708023704190921">calibrate auto-channel-select enable</strong>
[AC-wlan-group-radio-ap-group1/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b2110205126190921">calibrate auto-txpower-select enable</strong>
[AC-wlan-group-radio-ap-group1/0] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b276683270190921">quit</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b803857613190921">radio 1</strong>
[AC-wlan-group-radio-ap-group1/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1438374519190921">calibrate auto-channel-select enable</strong>
[AC-wlan-group-radio-ap-group1/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1859980560190921">calibrate auto-txpower-select enable</strong>
[AC-wlan-group-radio-ap-group1/1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b677098010190921">quit</strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b7872310190921">quit</strong></span></span></span>

# 在域管理模板下配置调优信道集合。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1271573362190921">regulatory-domain-profile name default</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b514631991190921">dca-channel 2.4g channel-set 1,6,11</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b277013222190921">dca-channel 5g bandwidth 20mhz</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b24876317190921">dca-channel 5g channel-set 149,153,157,161</strong>
[AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1471196768190921">quit</strong></span></span></span>

# 创建空口扫描模板“wlan-airscan”，并配置调优信道集合、扫描间隔时间和扫描持续时间。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1247056463190921">air-scan-profile name wlan-airscan</strong>
[AC-wlan-air-scan-prof-wlan-airscan] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1117794299190921">scan-channel-set dca-channel</strong>
[AC-wlan-air-scan-prof-wlan-airscan] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b952766140190921">scan-period 60</strong>
[AC-wlan-air-scan-prof-wlan-airscan] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b410637818190921">scan-interval 60000</strong>
[AC-wlan-air-scan-prof-wlan-airscan] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1665063074190921">quit</strong></span></span></span>

# 创建2G射频模板“wlan-radio2g”，并在该模板下引用空口扫描模板“wlan-airscan”。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1256985097190921">radio-2g-profile name wlan-radio2g </strong>
[AC-wlan-radio-2g-prof-wlan-radio2g] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b457500118190921">air-scan-profile wlan-airscan</strong>
[AC-wlan-radio-2g-prof-wlan-radio2g] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1021544261190921">quit</strong></span></span></span>

# 创建5G射频模板“wlan-radio5g”，并在该模板下引用空口扫描模板“wlan-airscan”。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b2051834054190921">radio-5g-profile name wlan-radio5g </strong>
[AC-wlan-radio-5g-prof-wlan-radio5g] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b995167985190921">air-scan-profile wlan-airscan</strong>
[AC-wlan-radio-5g-prof-wlan-radio5g] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b2027454330190921">quit</strong></span></span></span>

# 在名为“ap-group1”的AP组下引用5G射频模板“wlan-radio5g”和2G射频模板“wlan-radio2g”。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b987632829190921">ap-group name ap-group1 </strong>
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b2076481730190921">radio-5g-profile wlan-radio5g radio 1</strong>
Warning: This action may cause service interruption. Continue?[Y/N]<strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_zh-cn_task_0175818418_b1384307436190906">y</strong> 
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1780139102190921">radio-2g-profile wlan-radio2g radio 0</strong>
Warning: This action may cause service interruption. Continue?[Y/N]<strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_zh-cn_task_0175818418_b1384307436190906_1">y</strong> 
[AC-wlan-ap-group-ap-group1] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1249663083190921">quit</strong></span></span></span>

# 配置射频调优模式为手动调优，并手动触发射频调优。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1799447059190921">calibrate enable manual</strong>
[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1693505529190921">calibrate manual startup</strong></span></span></span>

# 待执行手动调优一小时后，调优结束。将射频调优模式改为定时调优，并将调优时间定为用户业务空闲时段（如当地时间凌晨00:00-06:00时段）。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1443027864190921">calibrate enable schedule time 03:00:00</strong></span></span></span>

验证配置结果

WLAN业务配置会自动下发给AP，配置完成后，通过执行命令display vap ssid wlan-net查看如下信息，当“Status”项显示为“ON”时，表示AP对应的射频上的VAP已创建成功。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b367333496190921">display vap ssid wlan-net</strong>
WID : WLAN ID
--------------------------------------------------------------------------------
AP ID AP name RfID WID   BSSID          Status  Auth type     STA   SSID
--------------------------------------------------------------------------------
0     area_1  0    1     60DE-4476-E360 <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1874482883190921">ON</strong>      WPA/WPA2-PSK  0     wlan-net
0     area_1  1    1     60DE-4476-E370 <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1628414885190921">ON</strong>      WPA/WPA2-PSK  0     wlan-net
-------------------------------------------------------------------------------
Total: 2</span></span></span>

STA搜索到名为“wlan-net”的无线网络，输入密码“a1234567”并正常关联后，在AC上执行display station ssid wlan-net命令，可以查看到用户已经接入到无线网络“wlan-net”中。

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383113__zh-cn_task_0176912357_zh-cn_task_0176912351_b1120837202190921">display station ssid wlan-net</strong>
Rf/WLAN: Radio ID/WLAN ID
Rx/Tx: link receive rate/link transmit rate(Mbps)
---------------------------------------------------------------------------------
STA MAC         AP ID Ap name   Rf/WLAN  Band  Type  Rx/Tx      RSSI  VLAN  IP address
---------------------------------------------------------------------------------
e019-1dc7-1e08  0     area_1    1/1      5G    11n   46/59      -68   101   10.23.101.254
---------------------------------------------------------------------------------
Total: 1 2.4G: 0 5G: 1</span></span></span>

配置文件

SwitchA的配置文件

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">#
sysname SwitchA
#
vlan batch 10 101 to 102
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk pvid vlan 10
 port trunk allow-pass vlan 10 101 to 102
 port-isolate enable group 1
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 10 101 to 102
#
return</span></span></span>

SwitchB的配置文件

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">#
sysname SwitchB
#
vlan batch 10 100 to 102
#
dhcp enable
#
interface Vlanif10
 ip address 10.23.10.1 255.255.255.0
 dhcp select relay
 dhcp relay server-ip 10.23.100.1
#
interface Vlanif100
 ip address 10.23.100.2 255.255.255.0
#
interface Vlanif101
 ip address 10.23.101.1 255.255.255.0
 dhcp select interface
 dhcp server gateway-list 10.23.101.2
#
interface Vlanif102
 ip address 10.23.102.1 255.255.255.0
 dhcp select interface
 dhcp server gateway-list 10.23.102.2
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 10 101 to 102
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 100 to 102
#
return</span></span></span>

Router的配置文件

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">#
sysname Router
#
vlan batch 101 to 102
#
interface Vlanif101
 ip address 10.23.101.2 255.255.255.0
#
interface Vlanif102
 ip address 10.23.102.2 255.255.255.0
#
interface GigabitEthernet1/0/0
 port link-type trunk
 port trunk allow-pass vlan 101 to 102
#
return
</span></span></span>

AC的配置文件文章来源地址https://www.toymoban.com/news/detail-832668.html

<span style="color:#333333"><span style="background-color:#ffffff"><span style="background-color:#dddddd">#
 sysname AC
#
vlan batch 100 to 102
#
vlan pool sta-pool
 vlan 101 to 102
#
dhcp enable
#
ip pool huawei
 gateway-list 10.23.10.1
 network 10.23.10.0 mask 255.255.255.0
 option 43 sub-option 3 ascii 10.23.100.1
#
interface Vlanif100
 ip address 10.23.100.1 255.255.255.0
 dhcp select global   
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 100 to 102
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 101 to 102
#
capwap source interface vlanif100
#
wlan
 calibrate enable schedule time 03:00:00
 security-profile name wlan-net
  security wpa-wpa2 psk pass-phrase %^%#m"tz0f>~7.[`^6RWdzwCy16hJj/Mc!,}s`X*B]}A%^%# aes
 ssid-profile name wlan-net
  ssid wlan-net
 vap-profile name wlan-net
  service-vlan vlan-pool sta-pool
  ssid-profile wlan-net
  security-profile wlan-net
 regulatory-domain-profile name default
  dca-channel 5g channel-set 149,153,157,161
 air-scan-profile name wlan-airscan
  scan-channel-set dca-channel
 radio-2g-profile name wlan-radio2g
 air-scan-profile wlan-airscan 
 radio-5g-profile name wlan-radio5g
  air-scan-profile wlan-airscan 
 ap-group name ap-group1
  radio 0
   radio-2g-profile wlan-radio2g
   vap-profile wlan-net wlan 1
  radio 1
   radio-5g-profile wlan-radio5g 
   vap-profile wlan-net wlan 1
 ap-id 0 type-id 35 ap-mac 60de-4476-e360 ap-sn 210235554710CB000042
  ap-name area_1
  ap-group ap-group1
 #
return</span></span></span>

到了这里，关于华为配置直连三层组网直接转发示例的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！