fpga 通过axi master读写PS侧DDR的仿真和上板测试-Toy模板网

这篇具有很好参考价值的文章主要介绍了fpga 通过axi master读写PS侧DDR的仿真和上板测试。希望对大家有所帮助。如果存在错误或未考虑完全的地方，请大家不吝赐教，您也可以点击"举报违法"按钮提交疑问。

FPGA和ARM数据交互是ZYNQ系统中非常重要的内容。PS提供了供FPGA读写的AXI-HP接口用于两者的高速通信和数据交互。一般的，我们会采用AXI DMA的方式去传输数据，DMA代码基本是是C编写，对于FPGA开发者来说不利于维护和debug。本文提供一种手写AXI_MASTER接口用于PL 向DDR指定位置写入数据并验证读写是否正确。

本项目的思路是：PS通过GPIO发起写DDR的命令ps_start（高脉冲），FPGA在收到ps_start后，开始写数据到DDR，写完后通过IRQ中断通知ARM写入完成，ARM按顺序读DDR数据并通过UART输出读出的结果，arm读完后清除中断并发起下一次的写脉冲，循环写读。本项目代码稍作修改可以为FPGA数据采集+ARM算法处理系统提供参考。

开发板为Zynq UltraScale+ xczu2cg-sfvc784-1-i

ILA 采样AXI_master读时序

fpga 通过axi master读写PS侧DDR的仿真和上板测试,FPGA,fpga开发,嵌入式硬件

uart 输出的DDR读出数据，对比写入是一致的。

fpga 通过axi master读写PS侧DDR的仿真和上板测试,FPGA,fpga开发,嵌入式硬件

vivado block design 参考设计注意DDR是64位DDR。

fpga 通过axi master读写PS侧DDR的仿真和上板测试,FPGA,fpga开发,嵌入式硬件

vitis 工程代码如下需要注意刷新CACHE后再读不然cache和DDR数据可能不一致。

/******************************************************************************
*
* Copyright (C) 2009 - 2014 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/

/*
 * helloworld.c: simple test application
 *
 * This application configures UART 16550 to baud rate 9600.
 * PS7 UART (Zynq) is not initialized by this application, since
 * bootrom/bsp configures it to baud rate 115200
 *
 * ------------------------------------------------
 * | UART TYPE   BAUD RATE                        |
 * ------------------------------------------------
 *   uartns550   9600
 *   uartlite    Configurable only in HW design
 *   ps7_uart    115200 (configured by bootrom/bsp)
 */

#include <stdio.h>
#include "platform.h"
#include "xil_printf.h"


#include "xgpio.h"
#include "xparameters.h"

#include "xscugic.h"

#include "xil_cache.h"
#define INTC_DEVICE_ID		XPAR_SCUGIC_0_DEVICE_ID
#define INTC_DEVICE_INT_ID	XPAR_FABRIC_MYAXI_MASTER_V1_0_M0_0_WRITE_DONE_INTR_INTR

#define BASE_ADDR_FOR_DDR 0x00001000
#define DATA_COUNT (64)
XScuGic InterruptController;
XScuGic_Config *GicConfig;
XGpio Gpio;

u32 intr_recv;
u32 *data_array=(u32*)BASE_ADDR_FOR_DDR;

void myHandler(void *CallbackRef);

int main()
{
	intr_recv =0;
    init_platform();
	int Status;
	/* Initialize the GPIO driver */
	Status = XGpio_Initialize(&Gpio, XPAR_GPIO_0_DEVICE_ID);
	if (Status != XST_SUCCESS) {
		xil_printf("Gpio Initialization Failed\r\n");
		return XST_FAILURE;
	}

	XGpio_DiscreteWrite(&Gpio, 1, 0);
	XGpio_DiscreteWrite(&Gpio, 2, 0);

	//GIC
	GicConfig = XScuGic_LookupConfig(INTC_DEVICE_ID);
	if (NULL == GicConfig) {
		return XST_FAILURE;
	}

	Status = XScuGic_CfgInitialize(&InterruptController, GicConfig,
					GicConfig->CpuBaseAddress);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}
	/*
	 * Perform a self-test to ensure that the hardware was built
	 * correctly
	 */
	Status = XScuGic_SelfTest(&InterruptController);
	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}

	/*
	 * Connect the interrupt controller interrupt handler to the hardware
	 * interrupt handling logic in the ARM processor.
	 */

	/*
	 * Connect a device driver handler that will be called when an
	 * interrupt for the device occurs, the device driver handler performs
	 * the specific interrupt processing for the device
	 */
	Status = XScuGic_Connect(&InterruptController, INTC_DEVICE_INT_ID,
			   (Xil_ExceptionHandler)myHandler,
			   (void *)&InterruptController);

	if (Status != XST_SUCCESS) {
		return XST_FAILURE;
	}
	Xil_ExceptionInit();
	Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_INT,
			(Xil_ExceptionHandler) XScuGic_InterruptHandler,
			&InterruptController);

	/*
	 * Enable interrupts in the ARM
	 */
	Xil_ExceptionEnable();
	XScuGic_SetPriorityTriggerType(&InterruptController,INTC_DEVICE_INT_ID,0x3A,0x3);
	XScuGic_Enable(&InterruptController, INTC_DEVICE_INT_ID);



	u32 index;
	while(1){
		XGpio_DiscreteWrite(&Gpio, 1, 1); //start write
		if(1 == intr_recv){ //recev fpga intr
			XGpio_DiscreteWrite(&Gpio, 1, 0); //start write clear
			Xil_DCacheFlushRange((u32)data_array,DATA_COUNT);
			for(index = 0;index <DATA_COUNT;index++)
			{
				xil_printf("index = %d,value = %d\r\n",index,*(data_array+index));
			}

			XGpio_DiscreteWrite(&Gpio, 2, 1);
			intr_recv =0;
//			break;

		}
	}

    cleanup_platform();
    return 0;
}

void myHandler(void *CallbackRef)
{
	/*
	 * Indicate the interrupt has been processed using a shared variable
	 */
	intr_recv = 1;
	xil_printf("intr occurs\r\n");
}

项目源代码地址：

fpga通过aximaster读写PS侧DDR的仿真和上板测试资源-CSDN文库文章来源地址https://www.toymoban.com/news/detail-849085.html

到了这里，关于fpga 通过axi master读写PS侧DDR的仿真和上板测试的文章就介绍完了。如果您还想了解更多内容，请在右上角搜索TOY模板网以前的文章或继续浏览下面的相关文章，希望大家以后多多支持TOY模板网！